User's Manual

Brief Introduction
This product is a multifunctional wireless door sensor. Integrate functions of
emergency button and door sensor , with a design of low power consumption chip
and of low voltage fault monitoring report, anti-tamper and anti-destruction.
Compatible with 1527 coding format, long emission distance. Typically apply to all
kinds of anti-theft doors & windows of households and commerces.
Transmitter
Magnetic bar
Emergency button
The s
ensor is installed on
to the moving doo
r(picture 2).
place for installation, take out the sensor the
adhesive tape on back; Please take notice of the below:
First,
and put
clean
up the 2-sided
1, PartA, the transmitter(sensor body) and Part B, the magnetic bar should
be installed separately, that is, the body should be installed
on the fixed
frame and the magnetic bar should be installed on the mobile door.
(Notes: magnetic bar is on the left of the transmitter as picture 1. ).
2, Magnet and transmitter is facing up and down.
3, After installation, the indicator light flashes once while opening the door
which means installation is available.
4, Door sensor indicator light flashes once which means the hints of alarm;
indicator flashes twice means the low power of the battery.
5, Part A and Part B can be consolidated with screws, (take out bottom
cover of the transmitter, fix with screws, then fit the front cover onto the
bottom cover. )
6, The metal door would affect the signal; if installed onto the metal door,
should raise the transmitter bottom of the transmitter with insulating
material
Electrical Property
No.
Item
Technical Index
Unit
Remarks
Working voltage
Static current
Emission current
Emission distance
Trigger distance
Under-voltage
point
Coded format
Emission
Frequency
(in open air)
(Picture1)
St r uc t ure d iag r am a n d
in s ta l lat ion r equ i re m en t s
(Picture1)
(Picture2)
door