DJI RS 2 Quick Start Guide DJI RS 2 Overview 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16.
17. 18. 19. 20. 21. 22. 23. 24. 25. Camera Control PortRSS (USB‐C) Focus Motor Port (USB‐C) Image Transmission/Focus Motor Port (USB‐C) Front Wheel Trigger Power Port (USB‐C) Power Button Pan Motor Pan Lock Getting Started A.Downloading the DJI RONINTM App and Watching the Tutorials B.Charging the Battery and Checking the Battery Level Before using for the first time, charge the grip through the power port using a power cable (included) and a USB adapter (not included).
D. Mounting the Grip Insert the gimbal into the grip as shown. Ensure the lever is in the unlocked position, and the toggle to the locked position after attaching. To remove the grip, toggle the lever to the unlocked positon, and detach the grip while pressing down the detach button. The gimbal is folded by default. Toggle the tilt lock, roll lock and pan lock to the unlocked positon, and then adjust the gimbal positon as shown, lock the three axes again.
E.Powering On/Off Press and hold the power button to turn DJI RS 2 on or off. F. Activating DJI RS 2 DJI RS 2 needs to be activated through the Ronin app before using for the first time. 1. Press and hold the power button to power on the gimbal. 2. Enable Bluetooth on your mobile device and launch the Ronin app. Note that a DJI account is required to launch the Ronin app. Once detected in the list of Bluetooth devices, select DJI RS 2 and input the default Bluetooth password: 12345678.
* Riser plate is required when using a focus motor. 2. Attach the Lower Quick‐Release Plateand lens support. Toggle the lever on the Lower Quick‐Release Plate to the unlocked position and then insert the camera, toggle the lever to the lock positon after engaged. Attach the lens support to the lower quick‐release plate, and bind the strap to the camera lens.
To remove the lower quick‐release plate, toggle the lever to the unlocked position, and remove the lower quick‐release plate while pressing the safety lock on the mounting plate. 4. Connect the camera control cable. Choose a proper camera control cable according the camera type. Plug one end of the cable 连接 into the RSS port of the gimbal and plug the other end into the camera. Balancing Balancing is required before shooting.
2. Balancing depth for the tilt axis a. Rotate the tilt axis so that the camera lens is pointing forward. Toggle the lever to the unlocked position. b. Check to make sure the camera is not front or back‐heavy. If front‐heavy, move the camera backward by turning the knob. If back‐heavy, move the camera forward. c. Toggle the lever to the locked positon. The Tilt axis is balanced if the camera is steady while tilting up or down for 45 degrees. d. Lock the tilt axis. 3. Balancing the roll axis a.
c. Toggle the lever on the roll arm to the locked positon. The roll axis is balanced if the camera is steady. d. Lock the roll axis. 4. Balancing the pan axis a. Unlock the pan axis. Toggle the lever on the pan arm to the unlocked positon. b. Hold the grip, tilt DJI RS 2 forward, and adjust the pan arm to parallel to you. Check the movement of the pan axis. If the camera lens rotates to the left, push the pan axis to the right. If the camera lens rotates to the right, push the pan axis to the left. c.
Op peration Toucch Scree After installation, activation, and balancin ng, DJI RS 2 must m be auto o‐tuned beforre it can be used. u Makke sure the th hree axes are all unlock beefore powerin ng on. Hom me: tap gimbaal calibration to start auto tune, and ch heck the balance status, seelect follow mode m and follow speed d by tapping the t icons.
Front Wheel:turn the wheel to control focus. Ronin App Use the Ronin app for more features, such as gimbal and camera settings, force mobile. Specifications Weight Gimbal：Approx.1,062g(excl.quick-release plate) BG30 Grip：Approx.265g Extended Grip/Tripod:Approx.226g Quick-Release Plate:Approx.105g Dimensions Gimbal unfolded：444.5mm*193.5mm*264.5mm Model：BG30‐1950mAh‐15.4V Capacity：1950 mAh Energy：30.03 Wh Voltage：12 V‐17.6V Input Power Operating Current Static Current：0.
FCC Compliance Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
