IntelliTrac X1 User ’s Manual Version: Date: Status: 1.3 Mar 27, 2006 Preliminary © Systems & Technology Corp. All rights reserved.
General notes With respect to any damages arising in operation with the described product or this document, S&T shall be liable according to the General Conditions on which the delivery of the described product and this document are based. This product is not intended for use in life support appliances, devices or systems where a malfunction of the product can reasonably be expected to result in personal injury.
IntelliTrac X1 User’s Manual Table Of Contents 1 2 3 4 Features ...................................................................................................................................1 System Requirements .............................................................................................................1 Product Contents ....................................................................................................................1 Hardware Installation .........................
IntelliTrac X1 User’s Manual 1 Features 16 channels GPS receiver with high sensitivity up to –152dBm Quad-band GSM/GPRS (850 / 900 / 1800 / 1900 MHz) solution Intelligent real time tracking mode High capacity Li-Polymer backup battery Advanced power management Journey logging for thousands position Remote configuration and firmware upgrade 2 System Requirements The IntelliTrac X1 configuration software is based on Microsoft Windows systems.
IntelliTrac X1 User’s Manual 4 Hardware Installation 4.1 Install SIM card Press the yellow button to enject the SIM card holder and insert the SIM card. If you would like to disable the PIN code, please use general GSM cellular phone to disable the PIN code in advance. 4.2 Install Cables Install I/O cable The I/O cable is a 10-wires cable which include power and positive/negative inputs and outputs.
IntelliTrac X1 User’s Manual Install GSM Antenna Connect the GSM antenna to the SMA connector with lable “GSM”. Install GPS Receiver Connect the GPS receiver to the Mini DIN connector with label “GPS”. Use a nylon cable tie to prevent unexpected come off. Install RF Receiver (Optional) Connect the RF receiver ti the 3 pins connector with label “RF”. 4.3 Mounting the unit For mounting the unit, bind to the body the holding bridles according the the schema below : © Systems & Technology Corp.
IntelliTrac X1 User’s Manual 5 Software Installation 5.1 Configuration Software © Systems & Technology Corp. All rights reserved.
IntelliTrac X1 User’s Manual 5.2 Firmware Download Software © Systems & Technology Corp. All rights reserved.
IntelliTrac X1 User’s Manual 6 Specifications Dimension Weight Input Ports Output Ports GPS Datum GPS Frequency GPS Channel GPS Tracking sensitivity GPS Cold Start GPS Warm Start GPS Hot Start GPS Update Rate GPS Accuracy GPS Baud Rate GSM/GPRS Frequency GPRS SMS Data mode Voice mode 90mm x 70mm x 30mm 250g 4 Inputs (2 positive, 2 negative) 4 Outputs (4 negative trigger) WGS-84 L1, 1575.42MHz 16 -152dBm typ.
IntelliTrac X1 User’s Manual 7.3 GSM/GPRS Output Power Parameter GSM850 E-GSM900 DCS1800 PCS1900 7.4 Max 5 5 0 0 Unit dBm dBm dBm dBm Min <-106 <-106 <-104 <-104 Max Unit dBm dBm dBm dBm GSM/GPRS Receive sensitivity Parameter GSM850 E-GSM900 DCS1800 PCS1900 7.5 Min 33 33 30 30 GSM/GPRS receive/transmit frequency Parameter GSM850 E-GSM900 DCS1800 PCS1900 Receive 869 ~ 894 MHz 925 ~ 960 MHz 1805 ~ 1880 MHz 1930 ~ 1990 MHz © Systems & Technology Corp. All rights reserved.
IntelliTrac X1 User’s Manual 8 LED Indicators PWR LED Status Function Off Power off 20 ms On / 2 secs Off The device is running in power saving mode. 500ms On / 500ms Off Reset procedure is in progress 20ms ON / 20ms Off Upgrade firmware is in progress On Power on GPS LED Status Function Off The GPS is off or running in power saving mode. 1 sec On / 1 sec Off No GPS satellites signal received On GPS Ready GSM LED Status Function Off The device is off or running in deep sleep mode.
IntelliTrac X1 User’s Manual 9 About Systems & Technology Corporation IntelliTrac X Series AVL device is produced by Systems & Technology Corporation. The company is a key developer and supplier of advanced systems in the Automatic Vehicle Location (AVL), Digital Map and Car Navigation Systems. If you need information on other maps solutions or products, please contact us at the phone and fax numbers listed below, or visit our web sites. Contact Information for System & Technology Corp.
FCC Regulations: zThis mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. zThis mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.