Systemair Connect Set-up
Setting up Systemair Connect This guide is made to assist you in getting started with setting up Systemair Connect. You can read about how to build a substructure and create new users and devices. The guidelines are intended for persons responsible for setting up and maintaining the structure and for users.
Content First login . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Change of ”User name” and ”Password” . . . . . . . . . . . . . . . . . . 5 Building the structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Building the substructure . . . . . . . . . . . . . . . . . . . . . . . . . 6 Create Area . . . . . . . . . . . . . . . . . . . . . .
| Systemair Connect set-up First login The login information will be handed over to the responsible person by the ventilation installer. Go to http://cloudair.systemair.com/login to log in. You will then see this page: The ”Account”, ”User name” and ”Password” name will be stated in the Login document. Enter the information and click ”Log in”. In the exampIe below the following Account is used: ”DK-8700-Test street-105”.
Systemair Connect set-up | Change of ”User name” and ”Password” At the first login the ”User name” and ”Password” must be changed. Do as follows: 1. Click on ”Action” 2. Select ”Edit Users” 3. Select ”Edit” next to the username ”Admin”. The default user is created as SysAdmin. SysAdmin is the highest user level. As SysAdmin you can view and change all values and add or delete ”Users”, ”Accounts”, ”Areas” and ”Devices”. 4. E nter the desired values in the fields: a. User name b. Password c.
| Systemair Connect set-up Building the structure It is important to get the right structure if you want several persons to share the responsibility for buildings or parts of buildings. Here to the right is an example of a simple structure: Symbolises a ”Device” – the air handling unit itself with the controller built in. Symbolises an ”Area” – an area that is used to subdivide the structure to ease access.
Systemair Connect set-up | Create Area 1. C lick on “Action” next to your Account and select ”+ New Area”. 2. U nder ”DK-8700-Test Street-105” two Areas are created: Building_South1 and Building_South2. You only need to fill in “Name” in order to create an Area. It is a good idea to use ”Description” and ”Comment” to make it easier to understand for other users of the system. Finish by clicking ”Create Area”. 3.
| Systemair Connect set-up Functions under Area Under Area you will find a number of functions to manage the structure. Select ”Action” next to the Area you want to edit. • Edit Area: Change name or description. • Move Area: Move an Area under another Area or to your Account. • Delete Area: Deletes an Area. For example, if you want to move the Area called “Gym”, select “Action” next to it and then “Move Area”. Then you get the option to move it to your wanted location, select “Move here”.
Systemair Connect set-up | User levels and rights (Access level) Sysadmin: Can see all values. Can change all values. Can add new “Users”, “Accounts”, “Areas” and “Devices”. Can delete “Users”. Service / Admin: Can see all values. Can change all values. Cannot add “Users”, “Accounts”, “Areas” and “Devices”. Operator: Can see all values. Can change values using the menu Actual/Setpoint and Time control. Cannot add “Users”, “Accounts”, “Areas” and “Devices”. Gæst: Can see all values.
| Systemair Connect set-up When the user User1 logs in he will see this: You can also edit user information and rights afterwards. If for example you want to add Area ”Gym” to User1 and change his user level to “Admin”, do the following: 1. S elect ”Action” and ”Edit Users” next to ”DK-8700-Test street-105” 2. Select ”Edit” next to the user you want to correct. 3. S elct Area ”Gym”. (Hold down the Ctrl key and select “Gym” with the mouse) 4. Change ”Access level” to Admin. 5. Select ”Update”.
Systemair Connect set-up | 6. At login it now looks like this: Create Device To create a Device use the serial number. The serial number is printed on the controller. In order to get in touch with the Device via Systemair Connect, it must be recorded in the database. The registration is done automatically when the Systemair Connect setting in the Device is set to active. If you have ordered the air handling unit with Systemair Connect enabled from the factory you can skip this step.
| Systemair Connect set-up Prepare your Device for Systemair Connect by using E tool Note: This section applies only to E tool version 3.2 and later versions. If you are using an earlier version of E tool please update to the latest version. Download and install the latest version of E tool from www.regincontrols.com or from www.systemair.dk under Support and E tool. 1. O pen E tool, select Tools and Communication settings... to find the Device on the network.
Systemair Connect set-up | 3. Find the serial number of your Device in the list, select it and click OK. Then there will be contact to the Device. 4. G o to Tools and select ”Synchronize all parameters” or use the shortcut below the menu bar. 5. E tool will now read all parameters in the controller. 6. If the controller is an older version compared to E tool this dialogue box will appear. Select ”Make the confi guration compatible with the controller” and click OK.
| Systemair Connect set-up 7. I n this step it is important that you load data from the Device into the software. Select “Update Tool”. 8. Now the E-Tool and the connected Device are synchronised. Then the CLOUDigo setting on the Device must be changed to Active. 9. Go to Tools and select the “Communication settings...”. 10. I n the dialogue box ”Communication settings” select ”TCP/IP, website and e-mail settings…”.
Systemair Connect set-up | 11. S elect ”Activate CLOUDigo Connection” and click ”Load TCP/IP settings” to update the controller. 12.
| Systemair Connect set-up Create new Device In the example, “DK-8700-Test street 105”, we want to place our air handling unit under “Gym”. Therefore, we must do the following: 1. S elect ”Action” next to ”Gym” and then select ”+New Device”. 2. F ill out the information in the dialogue box. Controller name: Gym_1 Serial number: 011509170111 Finish by selecting “Create Device”. In the example the following description is added: DV40 10000 m3/h. 3.
Systemair Connect set-up | Systemair Connect dialogue boxes Now your Devices are linked up to Systemair Connect. So now you can read the operating status of your air handling units. By clicking directly on a Device, you can open for access to it. The first tab is an overview where you can read the operation. In the second tab you can read the current setpoints. The values in blue can be changed by clicking on them. This requires that you are not logged in as Guest.
| Systemair Connect set-up The third tab shows you the current inputs and outputs from your air handling unit. On the fourth tab you can set the time settings for the air handling unit.
Systemair Connect set-up | The fifth tab shows you the current settings for the air handling unit elements. On the sixth tab you can see if there are current alarms you must be aware of.
| Systemair Connect set-up In the alarm status dialogue you can change status of current alarms via the “Acknowledge”, “Block” or “Unblock”. You just select the alarm and select whether you want to Acknowledge or Block the alarm. If you select “Acknowledge”, the alarm will be turned off and it will reappear if the same error occurs. If you select “Block”, the alarm will be turned off, and it will not come back. Blocked alarms can be activated again via “Unblock”.
Systemair Connect set-up | On the last tab you can get a quick overview of the operation. Here you can select which parameters will be shown in the chart by clicking on the sensor names above the chart. You can export the values into Excel by clicking the “Export to Excel”.
www.systemair.