ERP Data+SYSPLIT WALL OUT 09 INV32 HP Q 315809

ManualsBrandsSystemair ManualsAir Handling UnitsDanvent DV - Madam item for DV and Time

Callender and temperature settings

LEDs and buttons – navigating the menus – (change parameters) .................. 2

Operator's level - tree structure ..................................................................................... 3

Running mode – Auto/On/O ........................................................................................ 3

Alarm – cancel, acknowledge ......................................................................................... 4

Setting of temperature ...................................................................................................... 5

Modication of outdoor compensated supply temperature .............................. 5

Setting of ows - Flow control ........................................................................................ 6

Setting of ows - Pressure control .................................................................................7

Schedule settings ................................................................................................................ 8

Calender settings (time, date, weekday) ..................................................................... 8

Setting of holidays .............................................................................................................. 9

Setting of extended running........................................................................................... 9

Setting of min/max supply air temperature ........................................................... 10

Restore Systemair factory settings or latest user parameters

and settings ......................................................................................................................... 11

Annex 1A7 for the User manual

Software versions 3.2 , 3.3, 3.4 and 3.6

Operator's Guide for Systemair E 28 Controller

in large air handling units type:

Geniox, DV, TIME, DV Compact

Summary of content (12 pages)

PAGE 1
Annex 1A7 for the User manual Fans | Air Handling Units | Fire Safety | Air Distribution Products | Air Curtains and Heating Products | Tunnel fans Operator's Guide for Systemair E 28 Controller in large air handling units type: Geniox, DV, TIME, DV Compact Software versions 3.2 , 3.3, 3.4 and 3.6 Callender and temperature settings LEDs and buttons – navigating the menus – (change parameters)................... 2 Operator's level - tree structure...........................................................
PAGE 2
LEDs and buttons – navigating the menus – (change parameters) Hand terminal – Systemair Control Panel UP: Move to a higher menu line (Increase value of the parameter) DOWN: Move to a lower menu line (Decrease value of the parameter) RIGHT: Move right to a lower menu level (Move the curser to the right in the parameter) LEFT: Move left to a higher menu level.
PAGE 3
Operator's level - tree structure Start display Unit Date - running mode Start menus Running mode On / Off / Auto Running mode Selected functions and actual values Temperature Code - Setpoint Air control Code - Supply air m3/h or Pa Possibly CO2control Code - Extract air m3/h or Pa Time settings Set time and date Scedules Start / Stop Extended running Access rights Change level Code - 1111 Running mode – Auto/On/Off x1 The display is lit up 2. x1 Running mode 3.
PAGE 4
Alarm – cancel, acknowledge 3. 4. 5. 6. 7. 4 Example: Low frost guard temp Acknowledge Block Cancel    2. Example: Low frost guard temp Date, time, Class:A Select – Cancel. Never select Block, Block is only for test purposes during maintenance work. Confirm with OK. Class A alarm is always triggered by the system, when the reason for alarm is hazardous, and it is only possible to restart the unit, when the reason for the alarm has been solved.
PAGE 5
Setting of temperature 1. x1 The display is lit up 2. x1 Temperature x1 The system is configured to control a certain temperature. The actual value and set point for this temperature is shown. Access code 1111 may be necessary. 3. 4. Value to be changed flashes. Unit Date, time Syst: Running mode (Auto, Manual reduced, Man. norm., Off ) Act: xx.x ˚C Setp: yy.y ˚C Setp: yy.y ˚C Select and confirm new set point temperature.
PAGE 6
Setting of flows - Flow control 1. x1 The display is lit up 2. x3 Air control 3. x1 Flow control (control of the flow through the fans) 5. x2 Supply air fan selected as example. Value to be changed flashes. Change of set point for normal flow (1/1) and for reduced flow (1/2). Access code 1111 may be necessary. 6. 7. Confirm change of the set point value with OK. Value to change is flashing. 8. Select and confirm new value for normal air flow (1/1) and for reduced air flow (1/2) 9.
PAGE 7
Setting of flows - Pressure control 1. x1 The display is lit up 2. x3 Air control 3. x1 5. Pressure control x2 Supply air fan selected as example. Value to be changed flashes. Change of set point for normal flow (1/1) and for reduced flow (1/2). Access code 1111 may be necessary. 6. 7. Confirm change of the set point value with OK. Value to change is flashing. 8. Select and confirm new value for normal air flow (1/1) and for reduced air flow (1/2) 9. Confirm selected value with OK 10.
PAGE 8
Schedule settings The display shows 1. x1 The display is lit up 2. x4 Time settings 3. x1 4. 5. Unit Date, time Syst: Running mode (Auto, Manual reduced, Man. norm., Off ) Select Timer Normal speed (example).
PAGE 9
Setting of holidays Follow the steps below 1. x1 The display is lit up 2. x4 Time settings 3. x1 4. x4 5. x1 Select Holidays (Do not select Time/Date, because this is for setting the internal clock) 6. Confirm selected value (example). Value to be changed flashes. 7. Confirm with OK when all values are OK. The system will automatically return to the start menu after some minutes 8. Unit Date, time Syst: Running mode (Auto, Manual reduced, Man. norm.
PAGE 10
Setting of min/max supply air temperature Access to this menu requires log on at the high-authority level – ”Admin”. The display shows 1. x1 The display is lit up 2. x5 Access rights 3. x2 Select - Log on 4. Actual level: Admin Running mode Temperature Air control Time settings Manuel/Auto Settings Configuration Access Rights x2 Return to start menu 6.
PAGE 11
Restore Systemair factory settings or latest user parameters and settings Access to this menu requires log on at the high-authority level – ”Admin”. 1. x1 The display is lit up 2. x5 Access rights 3. x2 Select Log on Digit to be changed flashes. Factory logged password, exclusively for service partners. 4. Unit Date, time Syst: Running mode (Auto, Manual reduced, Man. norm., Off ) Log on Enter password **** Actual level: Operator Actual level: Admin Running mode Temperature ... Access rights 5.
PAGE 12
Systemair UAB Linu 101 LT-20174 Ukmergé Tel. +45 87 38 75 00 Tel. +370 340 601 65 Fax +370 340 601 66 Systemair A/S – January 2018 Systemair A/S Ved Milepælen 7 DK-8361 Hasselager mail@systemair.dk info@systemair.lt www.systemair.dk www.systemair.