Fans | Air Handling Units | Air Distribution Products | Air Conditioning | Fire Safety | Air Curtains and Heating Products | Tunnel Fans Air Handling Units Quick Guide to Danvent DV Den Blå Planet, National Aquarium Denmark
Danvent DV Modular Air Handling Unit Airflow 0,2-24 m3/s, 750-86.000 m3/h Facts about Danvent DV •1 4 sizes with airflows from 0,2-24 m3/s, 750-86.
Danvent DV is designed as a modular air handling unit. The modular functions can be configured for many different applications to make up the heart of any ventilation system. The flexibility makes it possible to optimize the air handling unit for each project. Danvent DV is dimensioned in the design programme SystemairCAD. SystemairCAD makes it possible to combine air handling unit functions as required very quickly and easily.
| Quick Guide to Danvent DV 1 2 4 5 7 6 3 The unit casing 1 The unit casing consists of a strong frame construction with sound and heat insulated panels. The frame consists of a closed 1,3/1,5 mm steel profile with surface of alu-zinc AZ185 for corrosion protection. The corners are die-cast and painted aluminum corners. The panels are also corrosion protected with alu-zinc AZ185 and consist of a sandwich construction with two 0,8 mm steel sheets and 50 mm mineral wool.
Quick Guide to Danvent DV | Functions The run-around coil heat exchanger DVR has an efficiency of up to 70% and is used, where the two airflows must be kept completely separate, or where the airflows are at a distance from each other. For example on 2 different storeys. The DVR is a heat exchanger system with circulating water-glycol brine between the supply air heating coil and extract air cooling coil. The transfer of energy is done through a pipe system.
| Quick Guide to Danvent DV Functions The bag filter DVF is a bag filter, whose design provides a large filter area. DVF has a long lifetime and thus good overall economy. DVF can be supplied in the filter classes G4, M5, M6, F7, F8, F9 og F7 City-Flo according to EN 779:2012. F7 CityFlo is a filter with particle and molecular filtration specially designed for use in urban areas and areas with heavy traffic.
Automatik Control System Corrigo Danvent DV can be supplied with a pre-assembled and fully tested control system. The control system is a user-friendly system, where functions and parameters are selected from the external control panel. The control panel can be positioned freely and used as a remote control. The most important operating data are continuously displayed on the control panel display, including alarms, operating values, operating status and time settings.
| Quick Guide to Danvent DV Combination Examples Unit size Rotary heat exchanger 10 15 20 25 30 40 50 60 80 100 120 150 190 240 Unit Width 970 1120 1270 1420 1570 1720 2020 2170 2170 2370 2590 2890 3190 3490 Rotary heat exchanger section Width - - - - - - - - 2320 2520 2890 3040 3720 4020 Unit Height* 970 1120 1270 1420 1570 1720 2020 2240 2540 2840 3140 3440 4340 4940 C1 Length 2160 2160 2460 2460 2760 3060 2910 3280 3210 3960
Quick Guide to Danvent DV | Unit size Plate heat exchanger Cross-flow exchanger 10 15 20 25 30 40 50 60 80 100 120 150 Unit Width 970 1120 1270 1420 1570 1720 2020 2170 2170 2370 2590 2890 Unit Height* 970 1120 1270 1420 1570 1720 2020 2240 2540 2840 3140 3440 Q1 Length 3210 3580 4030 4330 4780 5080 5230 5460 5230 5910 6960 7260 570 760 940 1130 1370 1640 2300 2550 2610 3210 4200 5130 3960 4330 4780 5080 5530 5830 5980 6210 5980 6
| Quick Guide to Danvent DV Certificates Systemair strives constantly to improve the energy saving, technical and mechanical quality of Danvent DV. The unit is certified and approved on a number of important points. Eurovent certification Danvent DV air handling units are Eurovent certified. This ensures the conformity between the calculated performance in SystemairCAD design programme, and the measured performance at independent test laboratories. Certificate 07.02.339.
Quick Guide to Danvent DV | SystemairCAD Danvent DV units are designed in SystemairCAD. It is an advanced design programme which ensures an optimal dimensioning of the unit’s functions. The programme is free and can be downloaded from www.systemair.com. SystemairCAD is very user-friendly and allows a simple and quick way to combine the unit functions as required.
Tel. +45 87 38 75 00 mail@systemair.dk www.systemair.
