SAVE VSR 150/B Installation instructions Document in original language | 254288 · v01 GB
© Copyright Systemair UAB All rights reserved E&OE Systemair UAB reserves the rights to alter their products without notice. This also applies to products already ordered, as long as it does not affect the previously agreed specifications. Systemair is not liable or bound by warranty if these instructions are not adhered to during installation or service.
Contents 1 Overview ......................................................1 1.1 General Description ................................1 1.2 Warranty ..............................................1 1.3 Type label.............................................1 2 Important Safety Information .............................1 2.1 Intended Use.........................................1 2.2 Admonitions .........................................2 3 Technical Data ................................................2 3.
Overview | 1 Overview 1.1 General Description Read the instructions carefully and in its entirety. For description of advanced settings and installation of accessories see Service and Accessories Installation manual. All documents can be found in our online catalogue at www.systemair.com. 1.2 Warranty For the assertion of warranty claims, the products must be correctly connected and operated, and used in accordance with the data sheets.
2 | Technical Data • The system should operate continuously, and only be stopped for maintenance/service. • Do not connect tumble dryers to the ventilation system. • Make sure that filters are mounted before starting the unit. 2.
Technical Data | 3.1 Dimensions and Weight Fig. 2 Dimensions The unit weight is 58 kg.
4 | Technical Data 3.2 Duct connections Symbol 3.3 3.3.1 Description Symbol Description Supply air Outdoor air Exhaust air Extract air Symbol Description Cooker hood air Installation recommendation regarding condensation Condensation inside of the unit When the unit is installed in a cold attic (close to outdoor temperature) the unit should run continuously.
Delivery, Transport, Storage | 4 Delivery, Transport, Storage 4.1 Transport and storage The SAVE VSR 150/B should be stored and transported in such a way that it is protected against physical damage. It should be covered so dust, rain and snow cannot enter and damage the unit and its components. Important • Use the packaging exclusively as transport protection and not as a lifting aid. • Load and unload the air handling unit carefully. 4.
6 | Prerequisites for Installation 5 Prerequisites for Installation To ensure a proper and fail-free operation, it is important that the unit is installed according to these instructions. The unit can be installed in the following positions. Fig. 3 Possible installation positions A. Ceiling installation. Left and right connections are possible. The enclosed mounting brackets are to be used. B. Horizontal wall installation with the supply air upwards is allowed. A wall mounting kit is required.
Installation | 5.2 Wall preparation for mounting bracket The unit should be installed in such a way that there is no vibration noise coming from the wall on which the unit is installed. 5.
8 | Installation Make sure that the surface is flat and that it supports the weight of the unit. Perform the installation in accordance with local rules and regulations.
Installation | Follow the ventilation drawing when connecting the unit to the duct system. 6.1 Ventilation Duct Connection and Insulation Important • Always cover the ventilation ducts during construction period. • Make sure there are no loose objects or impurities inside the ducts. Install the ducts, supply air diffusers and air intake grilles as shown in the ventilation drawing. • Supply air and extract air ducts must be insulated if located in cold places.
10 | Electrical connections Note: The type of ventilation ducts and insulation differ for each building and climate zone. If the ventilation drawing is not provided, please contact your installer or place of purchase for recommendations. 6.2 Installation and Configuration of Accessories Please follow instructions included with the accessory or consult “Service and Accessories Installation” manual which can be found in our online catalogue. 7 Electrical connections 7.
Before Starting the System | Position Description 12 Digital input 1 — Rotor guard sensor (only for VSR, VTR models) 13 Digital input 2 — Freely configurable / Cooker hood (VTR 150/K unit) 14 Analog output 2 — Freely configurable / Electrical heater controller (VTC 700 unit) 15 Analog output 1 — Rotary heat exchanger control signal (for VSR, VTR type models) / Damper control signal (for VTC, VSC type models), UI6 — Bypass damper feedback signal (for VTC, VSC type models) 16 Terminals for speed co
12 | Commissioning • The unit is installed in accordance with the instructions • Outdoor and exhaust air dampers and silencers are installed and that the duct system is correctly connected to the unit • All ducts are sufficiently insulated and installed according to local rules and regulations • Outdoor air intake is positioned with sufficient distance to pollution sources (kitchen ventilator exhaust, central vacuum system exhaust or similar) • All external equipment is connected • The unit is correctly wi
Concluding Routines | Set speed of supply and extract air fans for each level. When finished, review your settings. It is possible to go back to previous menus and make modifications. Choose heating type or none. Reset filter changer timer if necessary. Finish startup wizard with OK button. All additional changes post-startup wizard must be recorded in the Commissioning record. 10 Concluding Routines Perform the following procedures before leaving the site: 1.
14 | EU Declaration of Conformity 12 EU Declaration of Conformity Manufacturer EN 60529 Systemair UAB Linų st. 101 LT–20174 Ukmergė, LITHUANIA Office: +370 340 60165 Fax: +370 340 60166 www.systemair.com The manufacturer hereby confirms that SAVE VSR 150/B comply with all applicable requirements in the following directives and regulations.
254288 | v01
Phone +370 340 60165 Fax +370 340 60166 www.systemair.com SAVE VSR 150/B · Installation instructions · 254288 · en_GB · 2021-03-15 · v01 Systemair UAB Linų st.