Operation Manual SYS GW BACNET BMS Gateway Bacnet Thank you very much for purchasing our product. Before using your product, please read this manual carefully and keep it for future reference.
Contents 1. Connection Schematic .......................1 2. Functions ............................................2 3. Configuration Description ...................3 4. Object List ..........................................
1.
2. Functions Each bus of this device can connect up to 64 indoor units and 32 outdoor units, and 4 buses can connect up to 256 indoor units in total. With the embedded BACnet/IP function module and the Web page debugging function (Chrome browser is recommended), it is used to integrate the VRF system with the building management system. 2-1 Device Monitoring You can use the building management system to access the specific BACnet objects and obtain information of the indoor and outdoor units.
3. Configuration Description Before use, you need to configure the device. To access the configuration page, start a browser and enter the device IP address. 3-1 Date and Time Settings You can set the date and time. The settings take effect immediately. 3-2 Security Settings You can set the admin password. The settings take effect immediately. The admin account is "admin", and the default password is "123456". 3-3 Network Settings The default IP address of the Ethernet port is "192.168.1.8".
4.
4. Object List Object ID Object Name BV 5 Controller Lock Setting MV 1 Mode Setting MV 2 Current Value Description 0 - unlock wired controller, 1 - lock wired controller R/W RW Mode setting: 1 - OFF, 2 - Fan, 3 - Cool, 4 - Heat, 5 - AUTO, 6 - Dry. RW Fan Speed Setting Fan speed setting: 1~7: 1~7 fan speed; 8 - AUTO; 9 indicates that the fan is off (only used to show the status of the fan, cannot set the fan speed to off).
4.
4.
MD17U-005AW 16111200000137