DMV HR

ManualsBrandsSystemair ManualsDomestic fansDMV HR 150 - DMVU Unit <125W

Systemair Sverige AB · Industrivägen 3 · 739 30 Skinnskatteberg · Phone +46 222 440 00

DMV HR,

Decentralised

heat recovery unit

Application

Decentralised Mechanical Ventila-

tion unit, with alternate flow and heat

recovery core (“push-pull” type),

available in Ø100mm and Ø150mm:

extremely low energy consumption.

For installation in single room such

as living room and bedroom: for a

better flow balancing two units are

commonly used in parallel opera-

tion, having opposite and synchro-

nised flows.

Suitable for mounting on perimetral

walls.

Ideal solution for removal of CO2 or

any other indoor volatile pollutants

and to prevent condensation and

mould problems which inevitably

damage the building as well as the

occupants’ health.

Specification

Internal ventilation unit made of high

quality ABS providing long lasting

shock-proof and robust construction.

The unit is finished in white RAL

9010 and are UV resistant.

Unique design winglet-type impeller,

providing enhanced aerodynamic

properties, low noise and increased

efficiency.

High efficient reversible EC motor

with integral thermal protection,

mounted on sealed for life high

quality ball bearings.Designed for

continuous running.

Anti-dust filter removable from inside

by the tenant for maintenance.

Regenerative heat exchanger with

ceramic core; high thermal efficien-

cy.

Telescopic pipe adaptable to the

wall thickness.

External grille with anti-insect net

and water drip guard.

Features and benefits

IPX4 protection degree.

Aesthetic flat front cover for modern

interior design, easily removable for

cleaning without the need of tools.

Alternate flow with flow reversal

approx. every 70 seconds.

Free cooling to prevent heat ex-

change when not requested.

Integral led to indicate when the

“free cooling” option is active.

Simplified synchronisation of the

units.

Easy maintenance of the parts, heat

exchanger included.

Totally recyclable plastic compo-

nents, environmentally friendly.

Double insulated: no earth connec-

tion is required.

Designed and manufactured in ac-

cordance with EN60335-2-80 (Low

Voltage Directive) and the EMC

Directive (Electromagnetic Compat-

ibility).

Operation

Multi-Speed: operation speed can

be selected among 3 options.

Automatic speed increase via ambi-

ent sensor like SEN-HY, SEN-PIR.

Dedicated control panel (CTRL-S,

on request), highly recommended,

or controllable via standard switch-

es.

Summary of content (5 pages)

PAGE 1
DMV HR, Decentralised heat recovery unit Application Decentralised Mechanical Ventilation unit, with alternate flow and heat recovery core (“push-pull” type), available in Ø100mm and Ø150mm: extremely low energy consumption. For installation in single room such as living room and bedroom: for a better flow balancing two units are commonly used in parallel operation, having opposite and synchronised flows. Suitable for mounting on perimetral walls.
PAGE 2
Example of complete ventilation system Application: ideal solution in case of renovation. How it works: the continuous running decentralised heat recovery units (DMV HR) transfer thermal energy from air extracted from indoor rooms to incoming fresh air. Two units can work synchronised with balanced air flows and top acoustic comfort. BF MX The system can also include a single flow decentralised unit (BF MX) mounted in the wet room. No air distribution system is needed.
PAGE 3
Product fiche - ErP Directive, Regulations 1253/2014 - 1254/2014 Note: Air flow and thermal efficiency of the HR unit is measured based on pair. That is, not valid for only 1 unit. a) Mark - Systemair b) Model - DMV HR 100 c) SEC class - A c1) SEC warm climates kWh/m2.a -15,6 c2) SEC average climates kWh/m2.a -37,5 c3) SEC cold climates kWh/m2.
PAGE 4
Product fiche - ErP Directive, Regulations 1253/2014 - 1254/2014 Note: Air flow and thermal efficiency of the HR unit is measured based on pair. That is, not valid for only 1 unit. a) Mark - Systemair b) Model - DMV HR 150 c) SEC class - A c1) SEC warm climates kWh/m2.a -16,2 c2) SEC average climates kWh/m2.a -38,2 c3) SEC cold climates kWh/m2.
PAGE 5
Details Telescopic pipe adaptable to the wall thickness Wall plate for ease of installation and maintenance Design front cover for modern interior design, made of high quality ABS, RAL9010 External grille STD equipped with anti-insect net Anti-dust filter internal, easy to be removed and cleaned Heat exchanger regenerative type with ceramic core External hood PRO Acoustically insulated, equipped with anti-insect net.