6066A

ManualsBrandsSystemair ManualsAir ConditionersSPLIT-AHU Kit advanced - 0-10V Control Module incl. Sensor 5,3-16kW

See data sheet

IP 20

SPLIT-AHU Kit Advanced / Art. Nr. 145098

Systemair

Rated voltage

Rated current

volt

Phases

Operating voltage

Aux. voltage 1

Aux. voltage 2

Aux. voltage 3

Installation type:

Manufacturer:

Project:

Customer:

Steel plate

Fully insulated

Mounting plates arent on

grounding conductor connected

Protective measure to

IEC 439-1 / DIN VDE 0660

Transformer

rectifier

Direct-

tapping

Version

PE+N

PEN

colors:

Controller

external voltage

main power

Ort:

Connection Values:

Protection type:

All connections have to be made by an authorized electrical installation company

according to the local law and legislation. The mentioned cable, line and

cable shieldings are recommendations. They have to be chosen according to the local

law and legislation.

For the line- dimensioning the length of the cable and the method of wiring

were not taken into consideration. Therefore these points have to be recalculated

by the executing company.

All terminal connections have to be checked for their firm

fit before starting to use the device

Schwarz, Hellblau

Weiß, Orange, Rot

Violett

230V

24V

230V

13 A

Schwarz, Hellblau

Drawingnumber:

Status change name Date

work

check

norm

Project:

Sheet before:

Sheet after:

1 2 3 5

4 6

Order number:

6066a

Cover page

Systemair

13.07.17

Pfirrmann

sheet

Summary of content (6 pages)

PAGE 1
2 4 3 6 5 Customer: 7 8 colors: Ort: main power Schwarz, Hellblau Controller Weiß, Orange, Rot external voltage Violett Project: Manufacturer: Systemair Installation type: SPLIT-AHU Kit Advanced / Art. Nr. 145098 All connections have to be made by an authorized electrical installation company according to the local law and legislation. The mentioned cable, line and cable shieldings are recommendations. They have to be chosen according to the local law and legislation.
PAGE 2
1 2 4 3 6 5 7 8 L1 /2.1 L /2.1 24V~SP /2.1 2 -1F1 6 A 1 Controller unit fuxe -1F2 220V 1AT 24 V -1T1 Transformer 25 VA 13 23 14 24 -1S1 24V~SN . -1W1 2x0.75mm . /2.1 N /2.1 PE /2.1 . L1 N PE BN BU YEGN L1 N PE Mains Connection 230 V~ Status change name Date 13.07.
PAGE 3
1 /1.8 L1 /1.8 L /1.8 24V~SP 2 4 3 6 5 7 8 L1 /3.1 L /3.1 24V~SP 10 -3K2 /3.1 10 -3K1 /3.7 6 /3.5 6 4 5 ENC1 Power setting CN2 3 HEAT 2 COOL Power setting: Code 0 1 Model5.37.19.010.51416 CN3 Information: Before first use, set ENC1 Switch SPLIT-AHU Kit 8245 470154 + Q - communication0-10V P Temp 1 CN8 defrost CN7 alarm L N 230VAC Y /3.2 /1.8 24V~SN 24V~SN /3.1 /1.8 N N /3.1 /1.8 PE PE /3.1 . . 1 -2W1 3x 1,5 mm² BK . 2 . 3 .
PAGE 4
1 /2.8 L1 /2.8 L /2.8 24V~SP 2 4 3 6 5 7 8 L1 /4.1 L /4.1 24V~SP Z G M 2 Y 4 /4.1 3 1 -3R1 Minimum - limiter SGF 24 factory made setting: 5% Attention! Used DC from extern: use supplied DC-Relay 11 -3K2 /3.7 11 -3K1 7 /3.5 7 13 13 -3K1 -3K2 Relay 24VAC Relay 24VAC 14 Heating mode /2.6 Y 14 Cooling Mode /2.8 24V~SN 24V~SN /4.1 /2.8 N N /4.1 /2.8 PE PE /4.1 . . . .
PAGE 5
1 /3.8 L1 /3.8 L /3.8 24V~SP 2 4 3 6 5 7 8 L1 L 24V~SP 12 -3K2 /3.7 8 /3.8 24V~SN 24V~SN /3.8 N N /3.8 PE PE . . 15 16 3x 1,5 mm² BK BU -4W1 potential free Output close in cooling mode max. 5A-250VAC or 5A-30VDC Status change name Date 13.07.
PAGE 6
1 2 4 3 6 5 7 Kabelliste:6066a No. 1 Page: 1 Linetype LineMarking field device Amount veins -1W1 H05VV-F 3x 1,5mm² 3 -2W1 (N)YM(ST) 3x 1,5mm² 2 -2W2 (N)YM(ST) 3x 1,5mm² 2 -2W3 H03VV-F 2x0.75mm ws 2 5 -2W4 H03VV-F 2x0.75mm ws 2 6 -3W1 H03VV-F 2x0.