Presafe EU Type Examination Cert. 16 ATEX 8598 X Issue4

This certificate may only be reproduced in its entirety and without any change, schedule included.
DNV Product Assurance AS, Veritasveien 3, 1363 Høvik, Norway, Tel +47 67 57 88 00,
www.dnv.com ICP-4-5-i1-ATEX-f2, rev 1
Page 1 of 3
[1]
EU-TYPE EXAMINATION CERTIFICATE
[2]
Product Intended for use in Potentially Explosive Atmospheres Directive 2014/34/EU
[3] EU-
Type Examination Certificate Number:
Presafe 16 ATEX 8598 X
Issue 4
[4] Product: Radial fan
[5]
Manufacturer:
Systemair Sverige AB
[6] Address: Industriv 3
SE 739 30 Skinnskatteberg
Sweden
[7]
This product and any acceptable variation thereto is specified in the schedule to this certificate and the
documents therein referred to.
[8] DNV
Product Assurance
AS
, notified body number 2460, in accordance with Article 17
and Article 21 of
Directive 2014/34/EU of the European Parliament and of the Council, dated 26 February 2014, certifies
that this product has been found to comply with the Essential Health and Safety Requirements relating
to the design and construction of products inten
ded for use in potentially explosive atmospheres
, given
in Annex II to the Directive.
The examination and test results are recorded in confidential reports listed in
item 16.
[9]
Compliance with the Essential Health and Safety Requirements has been as
sured by compliance with:
EN IEC 60079-0:2018, EN 60079-1:2014, EN IEC 60079-7:2015/A1:2018 and EN14986:2017
Where additional criteria beyond those given here have been used, they are listed at item 18 in the Schedule.
[10]
If the sign “Xis placed after the certificate number, it indicates that the product is subject to the
Specific Conditions of Use specified in the schedule to this certificate.
[11] This EU-
TYPE EXAMINATION CERTIFICATE relates only to the design and co
nstruction of the
specified product
in accordance to the Directive 2014/34/EU
. Further requirements of the Directive
apply to the manufacturing process and supply of this product.
These are not covered by this
certificate.
[12]
The marking of the
product shall include the following:
II 2 G Ex db eb h IIB+H
2
T4 Gb, amb
ient temperature see [15]
Date of issue:
2022-04-21
PROD 021
________________________
Asle Kaastad
For DNV
Product Assurance
AS
The Certificate has been digitally signed.
See
www.dnv.com/digitalsignatures
for info

Summary of content (3 pages)