209852 SAVE VSR300 500 CEILING MOUTING KIT INSTR

ManualsBrandsSystemair ManualsAccessories residential systemsCeiling mounting kit VSR 300

Table Of Contents

InstallationGuideSAVEVSR

300/500Ceilingmountingkit

1(6)

Parts

Ex2Fx8

Gx2

SystemairUABLinųst.101,LT–20174Ukmergė,LITHUANIA

Phone:+37034060165Fax:+37034060166209852-en-vA003

Summary of content (6 pages)

PAGE 1
Installation Guide SAVE VSR 300/500 Ceiling mounting kit 1 (6) Parts A B C D E x2 F x8 G x2 Systemair UAB Linų st.
PAGE 2
Installation Guide SAVE VSR 300/500 Ceiling mounting kit 2 (6) Warnings Warning • Beware of sharp edges during mounting and maintenance. Use protective gloves. • Consider the unit weight when mounting! • This product must only be operated by a person which has suitable knowledge or education within this field or carried out with the supervision of a suitably qualified person. Possible Installation positions A. Upright installation on the floor. Left and right connections are possible.
PAGE 3
Installation Guide SAVE VSR 300/500 Ceiling mounting kit 3 (6) Dimensions G1 G2 F1 VSR 300 558 580 571 VSR 500 647 669 620 Systemair UAB Linų st.
PAGE 4
Installation Guide SAVE VSR 300/500 Ceiling mounting kit 4 (6) Assembly 1. Assemble ceiling mounting brackets. Connect parts C and D with two length profiles E. Secure them with knurled knob screws F. While assembling pay attention to marking at each end of part C and D. 2. Remove 4 knobs (1) that hold the side cover. Systemair UAB Linų st.
PAGE 5
Installation Guide SAVE VSR 300/500 Ceiling mounting kit 5 (6) 3. Place anti-vibration pads G on parts C and D. 4. Mount parts A and B on the unit. Secure them with previously removed knobs (1). While assembling pay attention to marking at each end of part A and B. Systemair UAB Linų st.
PAGE 6
Installation Guide SAVE VSR 300/500 Ceiling mounting kit 6 (6) Installation 5. Install previously assembled ceiling mounting brackets on the ceiling. Screws are not included in the ceiling mounting kit. Choose suitable screws and their amount based on your ceiling structure. Distribute screws evenly on each side. 6. Carefully lift and mount the unit as shown below. Pay attention to marking. Systemair UAB Linų st.