Veggrist

20.09.2016 TEE/KMB
Montasjeanvisning veggrist
Installation instruction wall grill
1.)
2.)
3.)
1. Utsparing i yttervegg:
Høyde: 330 mm
Bredde: 300 mm
Monter rist med piler oppover (A) og fest med 4
stk. skruer gjennom anvisninger. Bor opp frihull
(B).
2. Kanal skal ha fall mot rist.
3. Kanal mellom aggregat og rist må isoleres (C).
Det monteres fleksibel kanal ut fra aggregatet (D).
Tape/silikontett godt mellom rist og kanal (E).
NB! Dersom risten kobles til Ø200 kanal, må den
mindre kanaldimensjonene på risten skjæres
bort.
1. Make an opening in outer wall:
Height: 330 mm
Width: 300 mm
Mount the grill with arrows pointing upwards (A)
and fix by means of 4 pcs. screws through the
marking. Holes must be drilled (B).
2. Duct must be mounted with a slight grade towards
grill.
3. Duct between unit and grill must be insulated (C).
Mount flexible duct out from the unit (D).
Tape (or use silicone) well between grill and duct
(E).
Note! When the grill is connected to Ø200 duct, the
smaller connectors on the gill must be cut off.
Rett til endringer forbeholdes
Specifications may be changed without notice
Produsent/Manufacturer:
www.systemair.com
For UK: www.villavent.co.uk
Forhandler/Distributer: