PRODUCT SHEET PE12,5

PE1, P2,5
Speed controllers for variable voltage 1~ motors
Manual electronic speed controller
Type: P-E-1 / 2.5 / 4
Application / Function
Manual speed control of one or more voltage controllable 1~ fans.
The desired speed is adjusted steplessly by the rotary button with switch
function.
For a safe fan start up the setting begins with maximum output voltage. This can
be reduced down to the internally adjustment for "n-min”.
Surface mounting (IP54) or flush mounti ng (IP44) without surface mounting case
in a flush-type box. Type P-E-4 is only for surface mounting suitable.
Operational status indica tor by inserted LED.
Separate output (not controlled 230 V) fo r accessory equipment e.g. flap, lamp.
Alternatively at this output (terminal ?) the mains voltage for bypass the ON /
OFF contact can be connected. Temper ature monitoring, controller fuse
(5x20mm), spare fuse included.
Technical data
Type P-E-1 P-E-2.5
Part.No. 303586 303587
Rated current 1 A 2,5 A
Min. motor current 0.1 A 0.2 A
Internal fuse
F 1.25A-H F 3.15A-H
Weight 240 g 300 g
- Line voltage 1~ 230 V (-10 % / +10 %), 50/60 Hz
- Separate output (not controlled 230 V) max. 1A
- Max. permissible ambient temperature 35 ° C
- Interference emission in accordance with EN 61000-6-3
- Interference immunity in accordance with EN 61000-6-2
- Harmonics current in accordance with EN 61000-3-2
- Plastic enclosure ABS RAL 9001
- Housing protection for surface mounting IP54
for flush-mounting of P-E-1 and P-E-2.5 IP44
Dimension sheet [mm] Connection diagram
82
65
56
50
N
M
1~
3
L
2
N
N
4
1: Mains connection 1~ 230 V, 50/60 Hz
2: Internal fuse
3: Controlled output for motor
4: Not controlled output 230V, or for bypass
the ON / OFF switch
Frico AB
Box 102
S-433 22 PARTILLE
Tel.: [phone]
Fax: [phone]
[e-mail] http://www.frico.se