Original instructions ADA Cool SE .... 4 GB .... 6 NO .... 8 FR .... 10 RU .... 12 DE .... 14 PL .... 16 FI .... 18 ES .... 20 NL ....
ADA Cool L 58 218 L2 231 251 110 1 26 2 3 ADAC090 ADAC120 117 L [mm] 900 1200 L2 [mm] 747 1047 4 30 2
ADA Cool 1,8 m 1,8 m ADAC ADAC 2,2 m 4 ADACR 5A 2,2 m ADAC090/120 230 / 220 V~ 50 / 60 Hz 090H: 0,5 A, 120H: 0,55 A IP21 ADAC090 1120 9,6 54 ADAC120 1400 11,8 51 3
GB ADA Cool Mounting and assembly instruction General Instructions Read these instructions carefully before installation and use. Keep this manual for future reference. The product may only be used as set out in the assembly and operating instructions. The guarantee is only valid if the product is used in the manner intended and in accordance with the instructions. Application area ADAC air curtain is intended for permanent installation above cold store openings with heights of up to 2.5 metres.
ADA Cool Adjustment of ADA Cool 1.Set up the adjustment tool which could be ordered from Frico and attach the enclosed piece of paper. 2. The adjustment screw should be set on 30 mm in the standard setting. Fig. 3. 3. Put the adjustment tool on the floor, 0,5 m into the room on the cold side, see Figure to the right. 4. Adjust the speed with the 5-stage regulator (ADACR) so that the piece of paper is hanging straight down, not outwards or inwards.
Tel: +46 31 336 86 00 Fax: +46 31 26 28 25 mailbox@frico.se www.frico.se For latest updated information and information about your local contact: www.frico.se Art.