Product sheet SD20

ManualsBrandsSystemair ManualsControlsSD20 Actuator on/off 230V - VA7010-8103 + adapter M28/M30

European Electronic Controls Catalogue

Catalogue Section E

Product Bulletin VA-7010

Issue Date 06 2001

Order Nr. DS 10.463 E

VA-7010

Electric On/Off Actuator

ntroduction

The VA-7010 electric on/off actuator provides a

two-position (open-closed) control and can easily

be mounted with a threaded coupling onto VG5000

forged brass valves and onto VG4000 cast bronze

terminal unit valves (see pertinent bulletins).

A lever at the side of the actuator housing can be

used to manually open a 2-way PDTO valve, or the

normally closed port of a 3-way valve.

VA-7010 Actuator with VG5000 3-way (left)

and 2-way (right) valves

Features and Benefits

 Low or Line voltage models available

Provides application flexibility

 AC stall type motor

Ensures quiet operation

 Manual lever

Allows manual position mode for servicing

 Flat profile design with small side clearance

Provides mounting close to flat surfaces;

saves space

 Actuator can be mounted after valve body is

installed

Simplifies installation in confined spaces;

allows application flexibility

 Actuator can be rotated after mounting

Provides easier wiring by locating the wiring

conduit entry in any direction

Summary of content (4 pages)

PAGE 1
European Electronic Controls Catalogue Catalogue Section E Product Bulletin VA-7010 Issue Date 06 2001 VA-7010 Electric On/Off Actuator I ntroduction The VA-7010 electric on/off actuator provides a two-position (open-closed) control and can easily be mounted with a threaded coupling onto VG5000 forged brass valves and onto VG4000 cast bronze terminal unit valves (see pertinent bulletins).
PAGE 2
VA-7010 M anual Override O rdering data Supply voltage VA-7010-8101 24 VAC VA-7010-8103 230 VAC UL approved models are available on request. A ctuator combinations The VA-7010 series electric on/off actuators are specifically designed to be used with the VG5000 valve series.
PAGE 3
VA-7010 3 W irings instructions When wiring the actuator, please follow the instructions below: • • • WARNING Before mounting, wiring or adjusting the actuator, make sure that the power supply has been disconnected to avoid possible harm to material or person. When servicing make sure that: Make sure that the line power supply is in accordance with the power supply specified on the actuator. All wiring should conform to local codes and must be carried out by authorised personnel only.
PAGE 4
VA-7010 S pecifications Models Type of motor Action Supply voltage (50/60 Hz) Power consumption VA-7010-8101 VA-7010-8103 Synchronous stall On / Off 24 ±10% VAC 230 ±10% VAC 7 VA Minimum force 90 N (at minimum power supply and maximum temperature 50°C) Nominal stroke 3 mm (max. 5 mm) Full stroke time "On" Full stroke time "Off" Protection Connection to Valves Ambient Operating condition Ambient Storage condition Shipping Weight Compliance ≈ 10 s ≈5s IP40 (EN 60529), NEMA 1 M28x1.