Product Info

ManualsBrandsSystem Loco ManualsElectronicsS14BL

S14BL | Autoclave Sterilisation Tracking

General Device Operation

The S14BL is configurable at build time only. It is a hermetically sealed, transmit-only device.

It is designed to last up to 4 years in the field under ‘fair use’.

Functionality

The S14BL functionality includes

 Communications

o BLE standard broadcast & status message every 12 seconds

o BLE time series data broadcast message every 60s

o Frequency range - 2.400 GHz to 2.4835 GHz

o BLE Channels 37 (2.402 GHz), 38 (2.426 GHz) and 39 (2.480GHz)

 Sterilisation counting

o Each sterilisation event is counted and the on-time between sterilisations is

timestamped

o The last 10 sterilisation timestamps are recorded and included in the time series

broadcast

 Condition reporting

o Each standard broadcast contains battery level and indicative device temperature

 Location/Proximity

o When an S14BL tag is detected by a System Loco ‘LocoTrack’ or a Roambee ‘Bee’

device, the location of the tracking device can be used to indicate the location of the

S14BL (the S14BL signal can only be detected with a range of 80m).

Device Operation

The S14BL device will already be active when it is received. There is no On/Off button to control the

functionality. It will be active from the moment it is received and will continue to operate until the

battery runs out.

Once the battery has run out, and the device is no longer active, it must be disposed of or recycled

appropriately. Please contact your local authority for disposal or recycling information.

Device Reporting

To confirm that a device is operational you can confirm that it is reporting either to the server, or to a

mobile app.

The device will report its status information every 12 seconds. The status report will contain the

battery voltage and temperature. If a tag reader is present the report will be forwarded onto the

LocoAware server where it can be viewed by searching for the device ID in the LocoAware website, as

shown below. The device information and history list can be used to confirm the unit is reporting.

Summary of content (5 pages)

PAGE 1
S14BL | Autoclave Sterilisation Tracking General Device Operation The S14BL is configurable at build time only. It is a hermetically sealed, transmit-only device. It is designed to last up to 4 years in the field under ‘fair use’. Functionality The S14BL functionality includes     Communications o BLE standard broadcast & status message every 12 seconds o BLE time series data broadcast message every 60s o Frequency range - 2.400 GHz to 2.4835 GHz o BLE Channels 37 (2.402 GHz), 38 (2.
PAGE 2
S14BL | Autoclave Sterilisation Tracking Search Bar Type in the tag device ID to search for and view the tag information. If a tag reader is not available a mobile app supplied by System Loco can be used to read the information broadcast by the tag. The app requires an Android Phone to run and must be loaded directly onto the phone. It is not available via the Google Play store. Please contact System Loco to obtain the app If required.
PAGE 3
S14BL | Autoclave Sterilisation Tracking Product Label The product label can be found etched onto the S14BL housing. The label contains the following information:  Device ID – The device ID is unique to each device and is used to locate and monitor the device via the LocoAware website. The QR code is an encoded version of the Device ID that can be scanned.  FCC ID – The FCC ID for the S14BL.  Model/Hardware version – S14BL-1-0v3.  Regulatory Symbols, FCC, CE and do not dispose symbol.
PAGE 4
S14BL | Autoclave Sterilisation Tracking Product Certification This product is certified to the following standards           EN-62368 EN 300 328 EN 62311 EN 301 489-1, EN 301 489-17 EN 55032 and EN 55035 FCC Part 15B FCC Part 15C FCC-ID Giteki IP68 Environmental Considerations The equipment may contain substances that are harmful to the environment or human health. Please recycle this unit appropriately. Please contact your local authority for disposal or recycling information.
PAGE 5
S14BL | Autoclave Sterilisation Tracking This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.