User Manual v.1.
Notices for safety Welcome Note Thank you for your purchasing the Looket PMP (P20 / P30 / P40). Please carefully read this user guide instruction before using the product. Online information and Product Registration You can find more information about the player and register your unit in Looket website. http://www.looket.com The firmware upgrade news will be provided through registered e-mail address. Your unique product serial number and model no. can be found on the back side of the product.
Table of contents Before Using - Certifications & Copyrights - Notice for safety - Caution - Unit package - Designation - Designation 4 Getting Started - Turn on / Turn off - Charging the battery - Connecting AV out port - Cable connection for recording - USB cable connection 11 Operation 19 - Video player - Audio player - FM Radio - Photo viewer - File browser - Recording - Setup Additional Information 49
Before Using
Certifications & Copyrights - Certifications CE, FCC, MIC - Copyrights * The software, video and audio which have an intellectual property are protected by copyright and international laws. It is definitely each user’s responsibility when he/she reproduce or distribute the contents created using Looket PMP. * SysOnChip has all the rights of the patent, literary property, and intellectual property related to this manual. You shall not reproduce any part of this manual unless authorized by SysOnChip.
Notice for Notices for safety safety ⊙ If water or other liquids are present, power off the player and unplug the AC adapter. ⊙ If smoke or smell emit from player or adapter, power off the player and unplug the AC adapter. ⊙ Unplug adapter when it is not in use. ⊙ When it is electrical storms, unplug the AC adapter. Electrical shock can result. ⊙ Use only the supplied power adapter (AC) authorized by the manufacturer. Using with other power supply are strictly out of warranty with any reason.
! Caution ⊙ Never connect or disconnect the power plug with wet hand. ⊙ Do not leave Looket PMP in places of high temperature, such as in a sun-heated car. ⊙ Do not damage the AC adapter cord by pulling it and do not attempt to extend it. ⊙ Do not drop or put pressure or strong impact on Looket PMP. ⊙ Keep this Looket away from magnetic objects (credit cards, floppy disk, etc.). ⊙ Do not take a picture or leave Looket PMP with the lens aimed directly at the sun.
Unit package Looket PMP Data CD AV Cable USB Host Cable USB Slave Cable Earphones AC Adapter (110 ~ 240V) Quick Manual Lithium-ion Battery 2EA RCA Adapter (optional) Carrying Case (optional) Remote Controller (optional) * Package contents might vary depending on countries without notice.
Designation 17) HDD LED 1) Dual Stereo Speaker 2) TFT LCD 10) Remote Control Connector(optional) 3) Charging LED (Blue / Blinking) 11) AV Out / Earphones Connector 4) Navigation Key or Joystick 5) Escape Button 12) AV In Connector 6) Menu Button 13) USB Host / Slave Connector 7) Hold Switch 14) Power Connector (5V, 1.
Designation 1) Dual Stereo Speaker: Built-in stereo sound speaker 2) TFT LCD : 16.7 Million color display & QVGA LCD 3) Charging LED : Blinking - during charging / Blue light on - after full charging 4) Navigation Key : 5 Directional switch. Up, Down, Left, Right, Enter 5) Escape Button : Return to previous menu or escape the current mode. 6) Menu Button : Popup setup menu 7) Hold Button : Navigation key, menu, and ESC button are freezed. Only power button is operated.
Getting Started - Turn on / Turn off - Charging the battery - Connecting AV out port - Cable connection for recording - USB cable connection (Slave connection & Host connection) - Disconnecting USB connection
Turn on / Turn off 1) 2) Press the POWER button of the left side for 2-sec. You will see the light of HDD LED on top cover If LCD off switch is selected, the warning message will appear in LCD as below for short moment.
Charging the battery Before using Looket PMP, the battery must be fully charged. • • • • • • Open the battery cover. Put Lithium-ion battery in Looket PMP. Close the battery cover. And lock the battery cover switch. Connect Looket PMP with AC adapter, and then plug the adapter into the wall socket. The charging blue LED will be blinking during charging, and turn on once it is fully charged. To start Looket PMP, press and hold the POWER button for 2 sec.
Connecting AV out port Looket PMP can be usable with other electronic products like TV, VTR, Beam Projector, etc. 1) 2) Connect the AV out connector of Looket PMP with the AV cable included in the package. The AV cable consists of phone jack and RCA jack. Enter SETUP menu, and change ‘Composite Out’ to ‘ON’.
Cable connection for recording ※ Looket can be input signal of other AV products • Open the AC/DC jack cover and insert the phone jack of the AV cable into the AV IN connector. • Connect the RCA jack of AV Cable to the cable of other AV product like the picture 1. In case other AV product has different connector type, see right bottom picture.
USB cable connection Connecting to PC • Connect the Looket USB cable included in the package to the USB port of your PC • During USB connection with PC, do not operate any key of Looket PMP. • If any Movie, Audio, FM, or Photo player is executed, escape from the play mode. Otherwise USB cannot connected. ※ When the PC have Window98 Second version O/S, please install the driver from the enclosed CD.
USB cable connection Connect to other USB products • • Connect the Looket USB Host cable included in the package to your other USB products such as USB memory sticks, digital cameras, memory card readers, etc. Refer to ‘File Browser’ function.
Disconnecting USB connection ※ To disconnect the USB connection from your PC, follow the below instructions. - Click the ① picture in the right bottom side of screen.. ① - Click the right button of your mouse when you see the message ②. ② - When you see the ③ message, now you may unplug the USB cable from your Looket and computer. ③ - If you see the message ④, finish the program you are using for Looket properly and start the disconnecting procedure again.
Operation - Video Player - Audio Player - FM Radio - Photo Viewer - File Browser - Recording - Setup
Video player Getting started (1) Press and hold the power button (2) Select the Video Player in the main menu and press in the middle of navigation key. (4) (5) Choose “Yes” to play continuously, choose “No” to start from the beginning. (3) Choose the movie file when you see the file structure like below. If the file was stopped in the middle before, it will ask you to start from beginning or continuously.
Video player LCD display Volume Battery status No SMI file warning Caption area Play time Proceeding bar
Video player Key operation Press middle joystick : pause and resume Press and hold : Rewind 8 sec. Volume up Press and hold : Fast forward 8 sec. Volume down Go to previous menu Popup setup menu Hold key LCD off Power On/Off Button Press and hold it for 2sec.
Video player Menu contents LCD Brightness : By clicking navigation button to the left and right, the brightness of LCD screen can be changed. Composite Out : Select AV out by using left and right button of navigation key. TV Standard : Choose AV out signal between NTSC mode and PAL mode by using left and right button of navigation key.
Video player Codec information When choosing the file whose codec cannot be supported by Looket, the warning message will appear. In some files, only audio codec can be supported. Click ‘Yes’ for the next movie. Spider Man.avi This file is Not supported! Play next movie continuously? Yes No BookMark operation During movie play, if you stop it by clicking ESC button, you will see the message like right side when you restart the movie play. It memorizes only recently played movie.
Audio player Getting started (1) Press and hold the power button. (2) Select Audio Player and press in the middle of navigation button in the main menu. (4) The selected music file will be played. (3) Music file and folder in the Audio directory will be seem on the screen.
Audio player LCD display Current time Volume Battery status Play button (Previous, Play, Next, Stop, Pause) Proceeding bar Music file name Playing effect Playback time Playback time Bit rate Sampling rate
Audio player Key operation Press middle joystick: pause or resume Press quickly : Select the previous song file. Press for 1-sec.: Rewind current playing song Volume up Press quickly: Select the next song file. Press for 1-sec.: Fast forward current playing song Volume down Go to previous menu Popup setup menu Hold key LCD off Power On/Off Button Press and hold it for 2 sec.
Audio player Menu contents Play Mode Three modes are in the play menu Normal, Shuffle, Repeat Volume The Volume has 0~25 stages. Equalizer Select with left and right button on navigation key. There are 6 equalizer mode.
Audio player Setting User mode in equalizer Select USER in the equalizer mode and press in the middle of navigation key. With navigation key, change the spectrum as you like. One step is 1dB. When finishing one frequency’s spectrum, move to other frequency with navigation key and set the spectrum. After finishing USER mode, you can see the color of frequency is back to white. After setting spectrum, press in the middle of navigation key to set.
FM Radio Getting started (1) Press and hold the power button. (4) To go to Preset mode, press menu button. Move to the frequency you want to listen and press select button. (2) Select FM radio in the main menu and press in the middle of navigation key. (3) To move the frequency of radio, press left or right button of navigation key.
FM Radio LCD display Current Time Volume Battery Status Stereo / Mono Indicator Current Frequency Preset List
FM Radio Key operation Press middle joystick: Save selected frequency to the preset list Press quickly: Frequency decreases by 50kHz. Press it fo1 sec.: automatic frequency searching Volume up Press quickly : Frequency increases by 50kHz. Press it for 1 sec.: automatic frequency searching Go to previous menu Volume down Popup setup menu Hold key LCD off key Power On/Off Press and hold it for 2 sec.
Photo viewer Getting started (1) Press and hold the power button. (2) Select the Photo Viewer in the main menu and press in the middle of navigation key. (5-2) When you press the select button, the image will be enlarged by twice. (5-1) To rotate the picture, press the up and down button in the navigation key. (3) Select the file you want to see with the up and down button in the navigation key. (4) The image of selected file will be shown on LCD screen.
Photo viewer Key operation Press middle joystick : Zoom in/out : normal, 2x, 4x Rotate image CW Previous image Next image Rotate image CCW Go to previous menu Popup setup menu Hold key LCD off key Power On/Off Press and hold it for 2sec.
Photo viewer Menu contents Image Info Decide which of the file information will be shown among the file name, size, resolution etc. Select On / Off to set. Slid Show Time Enable automatic slide view function. Select the time interval to move to the next photo. (2 sec, 5sec, 10sec) To change to the manual slide view, select ‘off’. ※ Note After rotating image, the zoom function cannot be used and after zoom the picture, the rotating function cannot be used.
File browser Getting started (1) Press and hold the power button. (4) Press menu button to see the other available menus in the file browser. (Copy, Delete, Move, Setup) (2) Select the File browser in the main menus and press select button. (3) To move to other folder, press left and right button in the navigation key.
File browser Key operation Press middle joystick: Play selected file or change directory Change directory / file area Up cursor Change directory / file area Down cursor Go to previous menu Popup setup menu Hold key LCD off key Power On/Off Press and hold it for 2sec.
File browser Copying files (1) Move cursor to the file that you want to copy. (2) Press menu button and select copy. (3) Press select button (There will be message.) (4) Move to the folder where you want to copy the file to and press menu button. Message contents : Move to the folder to place the file and press MENU to copy. (5) When the process completed, the message will disappear.
File browser Moving files (1) Move cursor to the file that you want to move. (2) Press menu button and select ‘move’. (3) Press select button (There will be message.) (4) Move to the folder where you want to move the file to and press menu button. Message contents : Move to the folder to place the file and press MENU to move. (5) When the process completed, the message will disappear.
File browser Deleting files (1) Move cursor to the file that you want to delete. (2) Press menu button and select ‘Del’. (3) Press select button (There will be message.) (4) Press menu button. . Message contents : Are you sure to delete the file? (5) When the process completed, the message will disappear.
Recording Getting started (1) Press and hold the power button. (2) Select the Recording in the main menus and press select button. (4) When there is not input signal “Low Signal” message will be appear on the screen. (5) To stop the recording, press ESC button. The files created will be placed in the recording folder.
Recording Key operation Press middle joystick Start recording No operation for recording No operation for recording No operation for recording Goto previous menu No operation for recording Hold key LCD off key Power On/Off Press and hold it for 2sec.
Setup Select the Setup in the main menus and press select button. LCD display Video Setup, Audio Setup, Photo Setup, System Setup are in the Set up menu. By choosing menu button in other player mode, you can connect directly to setup menu. About each menu’s setup except system set up, please refer to the each menu.
Setup System Setup – LCD Sleep To save the battery, you can enable the LCD sleep function. There are option for 1 min, 5min, 10min and off. When any audio or video file is not played, and there isn’t any input signal to the device, the device can disconnect the signal to LCD temporarily screen to save the power consumption. And you can also use LCD off button in the left side of unit.
Setup System Setup – Power Sleep To save the battery, you can enable the LCD sleep function. There are option for 1 min, 5min, 10min and off. When any audio or video file is not played, and there isn’t any input signal to the device, the device can turned off automatically to save the power consumption. And you can also use power off button in the left side of unit.
Setup System Setup – Inner Speaker This unit have built-in stereo speaker. When you plug in the earphones to the Looket, the built-in speaker will be disabled. But if you want to save the battery more, you can turn off the built-in speaker power when you use the earphones.
Setup System Setup – Date Time You can set the date and time. When you turn on the device first time, the time might not be correct depending on your countries. Please set the right date and time for your location. When the unit is not used for a long time, the time can be initialized. Press select button in Date time menu. Use the navigation key to set the time and date. Press select button when you complete the time setting.
Setup System Setup – Firmware Update 다음 단계에 따라 Firmware Update를 실행한다. ※ Update를 하기 전에 AC Adapter를 반드시 연결하여야 한다. → 본 PMP의 최상위 폴더에 Upgrade할 파일을 USB를 이용하여 PC에서 복사한다. → PMP의 상위 메뉴에서 Setup으로 들어간다. → Setup메뉴 중에서 System을 선택한다. → System 메뉴 중에서 Firmware Update를 실행한다.(좌측그림) → 화면에 Update를 실행할 것인지를 다시 한 번 확인하는 메시지 창이 뜨고 ‘Yes’를 선택하면 Update가 실행된다. → Update가 실행되는 도중에는 절대로 전원을 Off하거나 기타 다른 동작을 하지 않도록 주의하여야 한다.
Additional Information
Trouble Shooting Trouble The product will not power on or any function is not operate. Solution Check the rechargeable batteries are not charged. Check the battery's anod and cathod are correctly connected. Check the system folder is deleted by mistake. If yes, copy the System folder from CD to the device. Check the LCD ON/OFF switch. When the LCD switch is OFF, the screen will not displayed. Nothing is displayed on the LCD screen. Check the LCD brightness in the setup menu.
Specification File Formats Video Support Codec MPEG4 Simple profile, XviD, WMV9 Divx3.11, 4, 5, 5pro Support File Format AVI, ASF, WMV Output Format NTSC / PAL Composite video output 75Ohm Audio Image Encoding MPEG 4 simple profile, ASF file format Support Codec MP3, WMA, AC3, OGG, G.726 Encoding G.
Specification Technical Specification Display HDD Interface Audio FM Radio Dimension Scalability Operating temperature Optional Accessory Power Source 3.5” TFT Landscape LCD, 16.7 Million color, QVGA 320x240 pixel Viewing angle : 60 degrees(Right & Left) 20GB, 1.8 inch, FAT32 USB2.0 Slave(max 480Mbps) USB1.1 Host full speed Audio output : Max 40mW Bandwidth : 8 ~ 96kHz Bit rate : 32kbps ~ 320kbps SNR : 97.0dB Bandwidth : 87.5MHz ~ 108MHz SNR : 60.0dB Antenna : earphones 77.
Warranty Sysonchip, Inc. warrants Looket PMP against defects in material and workmanship, under normal use and service, for one (1) year from the date of purchase. The warranty period of a rechargeable battery and consumables are six (6) months from the date of purchase. The Serial sticker on the battery should not be detached for the warranty. Incompatibility is not a defect covered by Sysonchip’s warranty.
Warranty limitations and exclusions This warranty applies only to the original consumer purchaser and is not assignable or transferable. This warranty does not apply to any product which has been subjected to misuse, misapplication, abuse, abnormal use, negligence, alteration or accident, or any product having its serial number altered or removed.
FCC NOTICE THIS DEVICE COMPLIES WITH PART 15 OF THE FCC FULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITION: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDERSIRED OPERATION. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.