The Bluetooth trademarks are owned by their proprietors and used by SysOnChip under Address 14FL, Sahakyeongum Bldg., 929, Dunsan-dong, Seo-gu, Daejeon, 302-120, Korea Phone / Fax Number T e l : +82.42.864.4665 Fax : +82.42.864.4664 Sales Contact E-mail: dian@sysonchip.co.kr Website URL http://www.sysonchip.co.
SYSON BLUETOOTH GPS User Manual v.1.0 [SOC2S03] SYSON BLUETOOTH GPS CONTENT 1. Product Designation 2. Getting Started 3. PDA Connection Guide 3.1. Connection with Fujitsu Siemens Pocket LOOX 600 3.2. Connection with with HP iPAQ Series 4. Users' Tips 5. Unit Package 6. Optional Accessory 1. Designation Note Thank you for purchasing SysOnTM Blueooth GPS receiver. SysOnTM Blueooth GPS is a wireless GPS receiver which turns a Bluetooth-enabled PDA or computing device to a wireless navi gation system.
SYSON BLUETOOTH GPS User Manual v.1.0 2. Getting Started 2.1. Charge the battery 1) Before use SysOnTM Blueooth GPS Receiver, the battery must be fully charged. Connect the power charger to the power jack, then plug into an electrical outlet. As the device is charging, the LED on the wall charger will show red light and turn to yellow when it is fully charged. And also, during charging, the battery status LED on the SysOnTM Blueooth GPS itself will show red light and turn off once it is fully charged.
SYSON BLUETOOTH GPS User Manual v.1.0 5. Several tasks require you to locate device and connect to it. And, it will automatically find Bluetooth enabled devices placed around the PDA. Please tab "SysOn BT GPS SP06". 05 PDA Connection Guide - Fujitsu-Siemens Pocket LOOX 600 [SOC2S03] SYSON BLUETOOTH GPS 6. You will see the "Remote Device Passkey" requirement for device pairing. The security key is also called a "Link Key".
SYSON BLUETOOTH GPS User Manual v.1.0 [SOC2S03] SYSON BLUETOOTH GPS 3. PDA Connection Guide - 02 3.2. Connection with with HP iPAQ Series 9. Once connection is established, you will see the above message including the using port no. "COM5". 07 PDA Connection Guide - Fujitsu-Siemens Pocket LOOX 600 & HP iPAQ Series 1. Tab "Start" on the PDA main screen. 2. Tap iPAQ Wireless, then Bluetooth Manager.
SYSON BLUETOOTH GPS User Manual v.1.0 3. Tab "New" at the bottom bar. 09 PDA Connection Guide - HP iPAQ Series [SOC2S03] SYSON BLUETOOTH GPS 4. Bluetooth connection wizard starts. Click "Next". 5. Click "Next" 6. Several tasks require you to locate a device and connect to it. Then, it automatically find Bluetooth devices placed around the PDA. Click "SysOn BT GPS 0FB6".
SYSON BLUETOOTH GPS User Manual v.1.0 7. You will be required to enter passkey to establish a paired relationship between devices. This is required at the first time only once. 11 PDA Connection Guide - HP iPAQ Series [SOC2S03] SYSON BLUETOOTH GPS 8. Enter 0000 as the Passkey (Arabic numeral 0, not alphabet letter O). And, tab "OK". 9. Select ¡°SPP slave¡±of Service Selection. Tab ¡°Next¡±. 10. Connecion shortcuts were successfully created. Tab "Finish".
SYSON BLUETOOTH GPS User Manual v.1.0 11. Connection were successfully established with Bluetooth GPS Receiver on SPP Slave. To connect with BT GPS, double click "SysOn BT GPS 0FB6 SPP slave" icon, or tab and hold it and click "Connect". 13 PDA Connection Guide - HP iPAQ Series [SOC2S03] SYSON BLUETOOTH GPS 12. Tab "Active Connections". You will see the connection status. 13. To identify the COM port: a. From the main screen, tap the Bluetooth icon at the bottom bar, and tab "Bluetooth Settings". b.
