User Manual

ManualsBrandsSysgration ManualsElectronicsBluetooth Remote Control

Remote Controller

User Guide

Introduction

Thank you for your purchase of the luetooth Media Remote for iPad. This

remote uses Bluetooth technology which provides a seamless connection up

to 32 feet (10m) away. This remote is iPad and Mac OS compatible. Its

compact size is ideal for portability and travel.

Contents

• Bluetooth Media Remote

• 1 x AAA Energizer® MAX® Batteries

• User Guide

System Requirements

Hardware

• iPod

• iPhone

• iPad

• Mac Bluetooth enabled device

Operating System

• Mac OS X v10.4 or later

Installing the Batteries

1 Remove the battery cover located on the bottom of the remote.

2 Insert the supplied battery, making sure that the positive (+) and negative (-) end

matches the polarity indicators inside the battery compartment.

Establishing the Connection

1. Turn on the remote by sliding the power button to the ON position.

2. Switch ON the Bluetooth function of your iPad.

3. Press the Connect button inside the battery compartment of your Bluetooth

Media Remote to enable discovery mode. The low power indicator light will

flash blue when the remote is in discovery mode.

4. Once the remote is listed as a found device in the bluetooth menu on the

iPad, tap on the name and you will be prompted to enter a pass key as shown.

“Bluetooth Media Remote” would

Summary of content (5 pages)

PAGE 1
Remote Controller User Guide Introduction Thank you for your purchase of the luetooth Media Remote for iPad. This remote uses Bluetooth technology which provides a seamless connection up to 32 feet (10m) away. This remote is iPad and Mac OS compatible. Its compact size is ideal for portability and travel. Contents • Bluetooth Media Remote • 1 x AAA Energizer® MAX® Batteries • User Guide System Requirements Hardware • iPod • iPhone • iPad • Mac Bluetooth enabled device Operating System • Mac OS X v10.
PAGE 2
5. Use the number buttons in the battery compartment of your remote to enter the passkey shown on the pop up message, followed by the enter key. 6. Bluetooth Media Remote for iPad is now connected with your iPad and the blue light on the front of the remote will stop flashing.
PAGE 3
PAGE 4
Buttons Definition (default) Button 1 2 “ENTER” Definition “0-9” buttons buttons 3 4 ID buttons Volume- 5 Prev-track buttons Button 6 7 8 9 10 Definition Next-track buttons Volume+ Play/Pause buttons s Home-Btn button Power button Bluetooth Connection: Mac 1. Go to the Bluetooth icon located on your desktop or in the system bar and click the icon to begin setup.
PAGE 5
Bluetooth function on your Mac. 2. Scroll down the list and select “Set up Bluetooth Device...” 3. The Bluetooth Setup Assistant will begin. Please follow the on-screen instructions. 4. Select “Bluetooth Media Remote” and click continue to proceed with setup. Your remote will need to be in “discovery” mode to connect. 5. Press the Connect button on the back of your Bluetooth Media Remote to enable discovery mode. The low power indicator light will flash blue when the remote is in discovery mode. 6.