SYRIS Xtive RFID TAG User Manual Version 1.
SYRIS active RFID TAG Instruction 一、Product Specification Specification \ Model SYTAG245-2S SYTAG245-2K TAG Picture Communicate 2.45GHz support read and write Frequency 2.40 ~2.
SYRIS active RFID TAG Instruction 二、SYTAG245-2S TAG 1. Diagram 2. Features: à Compact size Tag. à High security, Long range, read/write Tag. à Wireless tag programming.
SYRIS active RFID TAG Instruction 3. How to replace the battery: First, you need to screw the lid of tag by the proper screwdriver. And than, put the new battery properly into the battery bracket which is mounted on the main board. Like as below photo. 4. Set Parameters: You can set TAG emitting frequency, receive frequency and ON/OFF Tag with SYRIS Xtive utility. (Please refer to Xtive Utility user manual) 5. Battery Life: Battery life is affect by TAG emitting frequency and receives frequency.
SYRIS active RFID TAG Instruction 三、SYTAG245-2K TAG 1. Diagram 2. Features: à Compact size Tag. à High security, Long range, read/write Tag. à Remote ON/OFF Tag. à Wireless tag programming. à Call button: Emergency reporting / Signal transmission. à Two colors LED visual indication: Generally, the emitting signal will glitter green light; when it's low battery, it will glitter red sight.
SYRIS active RFID TAG Instruction 3. How to replace the battery: First, you need to screw the lid off tag by the proper screwdriver. And than, put the new battery properly into the battery bracket which is mounted on the main board. Like as below photo. 4. Set Parameters: You can set TAG emitting frequency, receive frequency, ON/OFF Tag and LED indication with SYRIS Xtive utility. (Please refer to Xtive Utility user manual) 5.
SYRIS active RFID TAG Instruction FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
FCC Caution: 1.The device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2.This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. 3.
