RFID Card TAG User Manual Version 1.
SYRI S RFI D TAG I nst ruct i on 一、Product Specification Specification \ Model SYTAG245-2C, SYTAG245-2C-BM TAG Picture Communicate 2.45GHz support read and write Frequency 2401.4-2480.
SYRI S RFI D TAG I nst ruct i on SYTAG245-2C(SYTAG245-2C-BM) 1. Diagram 2. Features: à à à à à à Card design. Two batteries for long life. Concealed button in the central of the card tag. Remote ON/OFF Tag. Wireless tag programming. Two colors LED visual indication: Generally, the emitting signal will glitter green light; when it's low battery, it will glitter red sight. à Buzzer:Remote active beep or click active beep. à Optional: Built-in passive RFID. (13.56MHz or 125 KHz) 3.
SYRI S RFI D TAG I nst ruct i on 4. Set Parameters: You can set TAG emitting frequency, receive frequency, ON/OFF Tag, LED indication and buzzer with SYRIS Xtive utility. (Please refer to Xtive Utility user manual) 5. Battery Life: Battery life is affect by TAG emitting frequency and receives frequency. Increasing emitting/receives frequency will shorten the battery life. Ex. Battery life for 6 month setting : Set TAG active time = 1 x 2.
FCC Statement NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.