SBF50xM Datasheet Syntronix SBF508M-21 SBF50xM PCBA module Datasheet Rev 0.
SBF50xM Datasheet © 2019 Syntronix Corporation Revision History Version Date Owner 0.1 0.5 0.9 2019/05/02 2019/06/19 2019/07/08 Syntronix Syntronix Syntronix First release Re-assign GPIO pin out Add XIP test points and fix PCB layout 0.
SBF50xM Datasheet Notice 1. All information included in this document is subject to change without any prior notice. Before purchasing please contact Syntronix Corporation for the latest product information. 2. Exporting the products or technology described in this product should comply with export control laws and regulations. Users should not use Syntronix Corporation products for any application relating to which may cause loss of human life, bodily injury or severe property damage.
SBF50xM Datasheet Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
SBF50xM Datasheet USERS MANUAL OF THE END PRODUCT: In the users manual of the end product, the end user has to be informed to keep at least 20cm separation with the antenna while this end product is installed and operated. The end user has to be informed that the FCC radiofrequency exposure guidelines for an uncontrolled environment can be satisfied.
SBF50xM Datasheet Table of Content 1. 2. 3. 4. 5. 6. 7. Overview .......................................................................................................................... 7 Features ............................................................................................................................ 7 Antenna List .................................................................................................................... 8 DC Power Connection .................................
SBF50xM Datasheet 1. Overview SBF50xM-xx series is a System-On-Chip integrated 2.4GHz radio transceiver and baseband processor for Bluetooth Low Energy 5(BLE5). It contains high-performance ARM ® Cortex TM -M0 32-bit RISC core, embedded Flash/OTP/ROM, embedded SRAM, the hardware of Link Layer for BLE5, 2.4GHz radio transceiver and peripheral for application. The chip has flexible power management and low power consumption, which is suitable for IoT or wearable device application.
SBF50xM Datasheet 3.
SBF50xM Datasheet 4. DC Power Connection MODE MCU STATE Description Typical DC-DC power connection, CPU running at 26MHz and no RF active Typical DC-DC power connection, CPU running at 26MHz and advertising interval 20ms (0dBm) Typical DC-DC power connection, CPU running at 26MHz and advertising interval 1s (0dBm) Typical DC-DC power connection, CPU running at 26MHz and connection interval 50ms (0dBm) Typical DC-DC power connection, CPU at 32.768KHz Sleep Mode Typical DC-DC power connection, CPU at 32.
SBF50xM Datasheet 5. General Specification Model Name SBF50xM –xx Bluetooth standard BLE5 Main Chipset SBF50xF-48 PCBA Dimension 22× 15 × 2.8（mm ） Frequency Range 2.4—2.485 GHz I SM Band Date Rates 1 Mbps, 2Mbps and long range (125kbps and 500kbps mode) Modulation GFSK Operating conditions Voltage 3.
SBF50xM Datasheet 1Mbps Adjacent + 2 MHz interference BER < 0.1% -45 dB 1Mbps Adjacent -3 MHz interference BER < 0.1% -45 dB 1Mbps Adjacent + 3 MHz interference BER < 0.1% -49 dB 2Mbps Co-Channel interference BER < 0.1% 4 dB 2Mbps Adjacent -2 MHz interference BER < 0.1% -19 dB 2Mbps Adjacent + 2 MHz interference BER < 0.1% -24 dB 2Mbps Adjacent -4 MHz interference BER < 0.1% -25 dB 2Mbps Adjacent + 4 MHz interference BER < 0.
SBF50xM Datasheet 6.
SBF50xM Datasheet 16 PA08 I/O PWM7/ MOSI 17 PA09 I/O SCK 18 PA10 I/O SS 19 PA11 I/O MOSI 20 VCC I/O VCC 21 GND - Ground Connections Table 6-1 Pin Description Confidential Syntronix Corporation 13
SBF50xM Datasheet 7. Recommended Reflow Profile Referred IPC/JEDEC standard.
SBF50xM Datasheet ESD CAUTION The SBF50xM is ESD (electrostatic discharge) sensitive device and may be damaged with ESD or spike voltage. Although SBF50xM is with built-in ESD protection circuitry, please handle with care to avoid the permanent malfunction or the performance degradation.
SBF50xM Datasheet STATEMENT OF FEDERAL COMMUNICATIONS COMMISSION (FCC) FCC ID:2AUBRBF508 This device complies with Part 15 FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received including interference that may cause undesired operation.
