User Manual IA9Q5 S83F RF 5G Wireless Module 1
1. Appearance & Dimension Dimension：35 * 35 * 0.
2. Mechanical & Key Connector 2.1 PCB Board Material Type：FR-4，Surface finish：ENIG，Layers：4。Dimension：35 * 35 * 0.8 mm; 2.
3. Performance 3.1 RF Specification Standard Wireless 5G Proprietary Protocol Connector Type FPC connector 26 Pin Transceiver mode 1T1R Modulation GFSK Frequency range 5.165 ~ 5.200 GHz (option) 5.740 ~ 5.840 GHz Output Power 12dBm (Peak power at Antenna port ) Sensitivity -90dBm(The smaller, the better) Input Voltage 3.0~3.6V (3.3V TYP.
3.2 Antenna Specification Impedance Input impedance 50 ohm Frequency 5.135GHz~5.205GHz，5.740~5.840GHz VSWR R.L 5.135GHz~5.205GHz , 1.46 ; 5.740~5.840GHz , 2.02 5.135GHz~5.205GHz：RL≤-14.5dB，5.15~5.85GHz：RL≤-9.4dB Isolation ANT0 VS ANT1 ≤-15dB The antennas didn’t operate simultaneous. Gain Omni-direction，Peak Gain ≤ 2.85dBi 3.
4 Reliability Test NO Test Item Test condition Test result Pass 1 TCT (Operating) a) Power on b) Vin = working voltage c) -10℃ to 60℃ d) Duration of exposure –10℃ & 60℃ at least 5mins. e) Ramp rate 2.3 ℃/mins or less. f) Power on/off 2,000 times (applicable to new module project with EEPROM or ECN related to EEPROM.) g) 30 cycles, samples: 6pcs 2 LTST (Operating) a) Power on. b) Vin = working voltage c) Operation at –10℃. d) 72hrs, samples: 6pcs Pass 3 HTST (Operating) a) Power on.
9 10 THT Packing VIBRATION a) No DC input to Module b) 40℃, 90%RH~95%RH c) 72hrs, samples: 22pcs a) Sinusoidal, 3g, 5~500Hz, 1hrs/axis b) Random, 3g, 5~500Hz, 0.5hrs/axis c) Number of cycles：3 cycles for each axis Pass Pass d) Vibration axis：X, Y and Z e) samples:6pcs 11 Packing Drop Test a) Height: 92cm (or more) dropped, 1corner, 3 edges, 6 faces.
5. Features a. 5.2GHz/5.8GHz ISM Band b. GFSK modulation c. Low BOM cost d. Long distance > 30m (Line of sight) e. Support 1-1 duplex mode or 1-N broadcasting mode f. RF frequency hopping in 58 channels g. Digital I2S audio interface h. Support no audio detection function i. Audio format 24bit , 32/44.1/48KHz sampling rate j. Robust Packet error correction k. Low power consumption l. No RF induced audio noise m. Compatible with FCC/ CE regulations 6. Application a. Wireless HTiB Rear Speaker b.
7. Statement a. CE Statement Herby, Syncomm Technology Corp. declares that this RF 5G Wireless Module ，IA9Q5 S83F is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. 1.) Operation limit：Use the RF 5G Wireless Module in the environment with the temperature between 0℃ and 55℃(Temp.), 2.) Operation Frequency range: 5740MHz-5840 MHz 5740MHz-5840 MHz can be used can be used in Europe without restriction. 3.) RF Output Power: 9.
