User's Manual
Thank you for choosing SYNCO product.
Please read this manual carefully before use and follow all instructions mentioned
herein.
Microphone Lav-S6E
User Manual
Caring For Your SYNCO Product
Please keep the product in a dry, clean, dust-free environment.
Keep corrosive chemicals, liquids and heat source away from the product to
prevent mechanics damage.
Use only a soft and dry cloth for cleaning the product.
Malfunction may be caused by dropping, impact of external force.
Do not attempt to disassemble the product. Doing so voids warranty.
Please have the product checked or repaired by authorized technicians if any
malfunctions happened.
Failure to follow all the instructions may result in mechanics damage.
Warranty does not apply to human errors.
1. The Use of Wind Mu or Windshield
Operations
Please install the wind mu or windshield to the
microphone for wind noise suppression.
2. The Use of Microphone
1). Attach the mic to clothing via the tie clip.
2). Plug it into your devices’ microphone jack.
Smartphone, Camera, Laptop
iPhone 7 and subsequent Apple devices
Some of Android devices
3.5mm Connector
Apple’s Lighting Adapter (excluded)
Type-C Adapter (excluded)
3. Battery Replacement
SYNCO Lav-S6E uses a replaceable CR1220 battery. Please install or replace the
battery as shown below.
3). Indicator
4). Run the audio/video recording application in your device. (Note: Android
devices need the third-party applications to operate the microphone.)
Battery Power
Working Status
On
High
Normal
O
Low
Abnormal
Specications
1. Polar Pattern: Omni-directional