Wireless Sensor Network Node Installation and User Manual Document Number Author Revision Date 85-xxxx-001 Lisa Brown Release 2.
SynapSense Installation and User Manual This manual covers the general installation of the following SynapSense Wireless Sensor Network Nodes: 99-0039-002 99-0039-011 99-0039-012 99-0039-015 99-0189-001 99-0217-001 99-0331-001 99-0348-001 99-0360-001 99-0944-001 Release 2.
SynapSense Installation and User Manual Table of Contents Regulatory Notices ...................................................................................................................................................................4 Warranty Information ............................................................................................................................................................6 Operation ................................................................................
SynapSense Installation and User Manual Regulatory Notices Notice to Users: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
SynapSense Installation and User Manual conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
SynapSense Installation and User Manual Warranty Information Limited One Year Warranty Our company warrants that for two years from the date of purchase, it will replace this product if found to be defective in materials or workmanship. For a prompt, no charge replacement of equivalent product, return the defective product postage prepaid to the appropriate address.
SynapSense Installation and User Manual Operation The SynapNet Node is designed to work in conjunction with a SynapNet Gateway device and the SynapSoft console. Please be sure you have correctly configured SynapSoft on the gateway computer prior to continuing. SynapNet nodes can be added to an existing SynapSense Wireless Network (driven by a SynapNet Gateway) or be used to form a network.
SynapSense Installation and User Manual join an existing network. Once the node has found the network the red light will cease and the blue light will blink every two seconds until the network is synchronized. Nodes may fall out of an active network if their signal strength is weak. Consider topology changes such as the addition of repeaters of the movement of other nodes in order to improve signal conditions. For more information, see the SynapSense Wireless Sensor Network User’s Guide. 4.