[TEAMSTER, Drillmaster, 2525 Installation & Operations Manual Fuel Master, 2525 Aviation Fuel Management System (FMS) INSTALLATION AND OPERATIONS MANUAL 10/21/99 8:55:08 AM Syn-Tech Systems; Inc. P.O. Box 5258 Tallahassee, FL.
Masterful 2525 Installation & Operations Manual Table of Contents General Information = Purpose « Safely Precautions + Certification/Approval « Warnings, Cautions, and Notes «Improvements Definitions of Fuel mastery 2525 Components UIT Operations Fuel Truck Electrocardiographs Preparation Installation of the TIM Installation of the NPI TIM & NP! Initialization Masterful 2525 Initialization Checklist Table of Contents
Purpose Fuel Masters 2525 Installation & Operations Manual General Information The Burgomaster 2525 FMS brings automated fuel accounting to aviation fueling operations. Fuel Master, 2528 FMS accomplishes this with security from unauthorized use while maintaining complete accountability of each transaction as it occurs. Transaction data is compiled after data communication to a central accounting office. Safety Precautions The National Fire Codes defines a fuel-dispensing site as a hazardous area.
Fuel Mastery 2525 Installation & Operations Manual General Information the radical's receiver is connected; and, e Consult the dealer or an experienced radio/TV technician for help, Warnings, Cautions, and Notes This manual emphasizes special operations with WARNINGS, CAUTIONS, or Notes preceding the applicable procedure: oA WARNING indicates a safety precaution that, if not followed, could result in personal injury; «A CAUTION indicates a safety precaution that, if not followed, could result in damage to e
Masterful 2525 Installation & Operations Manual Definitions of Masterful 2525 Components Masterful 2525 Fuel Management System HARDWARE Fuel Masters 2525 User Interface Terminal (INUIT: The UIT can be considered a modem state of-the-art handheld VIL Reader (VIR) (although it reads magnetic stripe cards).
Masterful 2525 Installation & Operations Manual Definitions of Masterful 2525 Components Internal Battery pack: The UIT is equipped with an internal Ni-Cad smart battery pack. The battery pack is controlled via a Microchip Technology Inc.
Masterful 2525 Installation & Operations Manual Definitions of Fuel Master 2525 Components produced a pulse of our design. No failures have occurred since. Syn-Tech will be using this same pulse throughout ADC/FDS applications. Temperature Sensor: The NPI is equipped with a fuel temperature sensor. The © temperature probe mounts on a fuel pipe. The information from the sensor is translated by the N Pi's PICKAX micro controller for transmission fo the UT's 68332 micro controller.
Masterful 2525 Installation & Operations Manual Definitions of Forecaster 2525 Components the external antenna should be mounted on a telephone type pole adjacent to the Fuels Office. The reception range in this configuration will be about two miles. Smart Battery Charger (HSBC: The SBC is based on a PICTURE micro controller based smart battery charger board.
Printer Masterful 2525 Installation & Operations Manual Definitions of Masterful 2528 Components CAUTION The use of any accessory equipment (ie. computers and modems) not supplied by Syn-Tech Systems, Inc, should be coordinated with Syn-Tech’s Product Support Department prior to its purchase. Syn-Tech’s Product Support Department can offer advice on equipment compatible with the planned installation.
Masterful 2525 Installation & Operations Manual Definitions of Masterful 2525 Components Start Online Session with Handheld. schedule Liaison Export Current Transaction. Manual Entry Transaction.. Archive Current Saved Manual Entry Transaction... These functions represent the primary operations of the program.
Masterful 2525 Installation & Operations Manual UIT Operations introduction This section provides an explanation of a Servicing Operation using the Masterful 2525.
Masterful 2525 Installation & Operations Manual UIT Operations 2. Connecting and Linking fo the NPI and TIM The user makes the electrical connections to the NPL or TIM if a cable interface is to be used and selects the interface on the UIT that matches their configuration. The LCD will appear as follows: SELECT LINK: 1 WIRED NPL 1 WIRED TIM 1 RF NPI/TIM 1 installed and enabled [ERASES oH ou ~> only if RF board is The display will change to one of the following, depending on the link chosen: 1.
Masterful 2525 Installation & Operations Manual UIT Operations After linking to the remote fueling device, the status of the fueling device is requested via RF. . Status Request — After a link has been established with the fueling device, the status of that device Is briefly displayed on the LOD: { DEVICE #muumuus 3 [ DIVIDE RATE quixotic] The divide rate obtained from the fusing device will be used to determine the final quantity of fuel to be stored in the transaction.
Masterful 2525 Installation & Operations Manual UIT Operations The DOODAD entry is always optional, independent of the previous entries. However, the Aircraft 1D and Miscellaneous Number are optional only if a card number has been entered. The card entry is optional. 1. Card Number The user in prompted Jor their magnetic stripe card number. This entry is optional. There are two methods of entering the card number, Inserting physical card, and manually entering of card number.
Masterful 2525 Installation & Operations Manual UIT Operations [ 1 The card is then checked against the AV CARD format. if the card is not a valid AV CARD the following is displayed an the transaction is canceled: CARD NOT ACCEPTED HERE! The second method of card entry is to manually enter the AV CARD card number, At the UIT LCD prompt; [ INSERT CARD OR [ ENTER CARD NUMBER [ { N=Cancel Y=Cont depress the ‘A’ key.
LE PETER, Masterful 2525 Installation & Operations Manual 3. Miscellaneous 1D UIT Operations Depending on the status of card entry, one of the following will be displayed: ENTER MISC NUMBER i H=Cancel ENTER MISC NUMBER H=Cancel Y=Cont the Card Number entry options have been bypassed, entry of a Miscellaneous {D is not optional and there will be no Y=Cont option. A ten character alphanumeric miscellaneous 1D can be entered. 4. DOODAD ENTER DOODAD 5 N=Cancel Y=Cont The entry of a DOOMSDAY is optional.
o Fuel Mastery 2525 Installation & Operations Manual UIT Operations L 1 [ PRINT RECEIPT AFTER] [ FUELING 1 £ 1 ita vis entered then the user is asked if they require a duplicate receipt: I { DUPLICATE RECEIPT { REQUIRED { Fueling The UIT will then send the start pump command to the NPI or TIM with the fueling parameters stored in the UT's configuration. The three parameters sent to the NP! or TIM are the No-pulse timeout, the Pump finish timeout, and the Maximum pulses allow for fueling.
Masterful 2525 Installation & Operations Manual message will be displayed: 1. NPI I ERROR ~ x3 [ COMMUNICATING [ WITH I NIL 2. TIM [ ERROR ~ mw f COMMUNICATING [ WITH [ TIMID 3. RF t ERROR ~ xy [ COMMUNICATING [ WITH [ RF DEVICE! UIT Operations 7. Receipt Printing — if a receipt was selected, it is printed directly after fueling. After a transaction is completed or canceled, the UIT returns to the link selection prompt.
Masterpiece 2525 Installation & Operations Manual UIT Operations [ 1 DOWNLOAD 1 [2 SETTINGS 1 [ A=More D=Exit ] { SELECT MENU: [ 3 = DIAGNOSTICS { { A=More Merited Note When ‘A’ is pressed for “more” menus and there are no additional menus screens, the menu wraps back to the first menu screen. DOWNLOAD NOT FINISHED.
Fuel Mastery 2525 Installation & Operations Manual UIT Operations [ 2 PUMP FINISH 1 I Reedit pulse timeout: A value between 1 and 255 is accepted and followed by °Y’. Cancel/N is functional, D' lase exits. i { CURRENT ENTER NP TO Pump finish timeout: A value between 1 and 255 is accepted and followed by YY". Cancel/N is functional, ‘IY also exits. I 1 [ CURRENT ENTER BF TO LCD Contrast This menu is used to set contrast level of the LCD.