Specifications

(RE5N)
PRODUCT DESCRIPTION
MOUNTING FRAME: Supplied with (2) 24" adjustable bar hangers
with 900 repositioning ability. Bar hangers equipped with (nail-less
installation) 3/4" serrated barbed studs for secure mounting in wood
joists. Brackets maybe flattened out to accommodate 27" flat bar
hangers. Earthquake structural cable compatible for drop panel ceilings
or any other mounting that requires direct support from structural
ceilings.
JUNCTION BOX: Pre-wired, galvanized steel J-box (25 cubic-inch)
with (4) 1/2", (3) 3/4", and (4) Romex knock-outs. Comes with WAGO
connectors. Strain clamps and ground wire. Die-cast aluminum fitting.
Equipped with
safety standard thermal protector rated for 90°C.
5" LINE VOLTAGE NEW CONSTRUCTION NON-IC
AIRTIGHT HOUSING 120V PAR30 BR30 Housing
SPECIFICATIONS:
Pre-wired .042" Metal housing adjusts up to 1 3/4" ceiling thickness.
Trim is secured with torsion wing springs/standard coil springs.
AIR FLOW RESTRICTION: Airtight models are designed to restrict
air flow from room into plenums in compliance to the WSEC-
Washington State Energy Code (less than 2.0 CFM-Cubic Feet per
Minutes)