T2203UD_EN.QX4 06.4.11 7:19 PM Page 1 24 inch DVD TRIPLE COMBO Owner’s Manual SC724DF FEATURES • Auto Channel Programming • Timer Recording 1 year 8 events programmable Daily/Weekly recording • One Touch Recording • Auto Clock Setting • Screen Saver • Auto Power On and Off • Parental Lock • Resume Play (DVD) • Closed Caption Decoder • Virtual Surround SUPPLIED ACCESSORIES This unit comes with the following accessories. Please confirm that all the accessories are included.
T2203UD_EN.QX4 06.4.11 7:19 PM Page 2 PRECAUTIONS WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. CAUTION: TO REDUCE THE RISK OF ELECTRIC THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.
06.4.11 7:19 PM Page 3 14. Lightning - For added protection for this unit receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power-line surges. 15.
T2203UD_EN.QX4 06.4.11 7:19 PM Page 4 LASER SAFETY This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM. LOCATION: INSIDE, NEAR THE DECK MECHANISM.
T2203UD_EN.QX4 06.4.11 7:19 PM Page 5 TABLE OF CONTENTS SYMBOLS USED IN THIS MANUAL . . . . . . . . . . . .5 PREPARATION FOR USE . . . . . . . . . . . . . . . . . .6 ANTENNA/CABLE CONNECTIONS . . . . . . . . . . . CONNECTING TO AN EXTERNAL DEVICE (FRONT) . CONNECTING TO A DIGITAL AUDIO DEVICE (REAR) INSTALLING THE BATTERIES IN REMOTE CONTROL .6 .6 .7 .7 OPERATING CONTROLS AND FUNCTIONS . . .8 TV/VCR SECTION TV OPERATION AND SETTINGS . . . . . . . . . . . .9 WATCHING A TV PROGRAM . . . . . . . . . .
T2203UD_EN.QX4 06.4.11 7:19 PM Page 6 PREPARATION FOR USE ANTENNA/CABLE CONNECTIONS Plug the incoming cable into the ANT. jack on the rear of the unit. If your cable service supplies you with a converter box or if you use a satellite system, connect the box with this unit as shown below. Cable or TV signal Antenna Rear of the unit AUDIO OUT ANT. COAXIAL Incoming cable from home Antenna / Cable Company (No Cable Box) ANT.
T2203UD_EN.QX4 06.4.11 7:19 PM Page 7 CONNECTING TO A DIGITAL AUDIO DEVICE (REAR) ANT. AUDIO OUT COAXIAL (OUT) Dolby Digital decoder AUDIO OUT COAXIAL To Coaxial digital To AUDIO OUT COAXIAL jack (DVD AUDIO OUT only ) (IN) Audio input jack or PREPARATION FOR USE You can connect this unit to a digital audio device to enjoy the digital audio of DVD. Connect to an amplifier equipped with digital input jacks, such as MD deck or DAT deck.
T2203UD_EN.QX4 06.4.11 7:19 PM Page 8 OPERATING CONTROLS AND FUNCTIONS - FRONT PANEL - DVD VD buttons buttons POWER 1 L VOLUME K 2 H SKIP B PLAY E SEARCH SKIP G C STOP TV/VCR buttons buttons A OPEN/CLOSE DVD D 3 4 3 5 6 7 - REMOTE CONTROL - POWER 22 23 24 PICTURE/ SLEEP SELECT 3 2 4 5 7 8 25 SPEED 36 VOL. 37 9 +100 0 +10 TV/VCR Audio SET-UP MUTE 38 39 PLAY FWD REV CLEAR MODE TITLE DISC MENU ENTER [FRONT PANEL] 01 POWER Button [TV/VCR P.9 / DVD P.
T2203UD_EN.QX4 06.4.11 7:19 PM Page 9 TV OPERATION AND SETTINGS 1 2 3 After antenna or cable connection is completed, connect the power cord into a standard AC outlet. SLEEP TIMER / PICTURE CONTROL TV/VCR You can set Sleep Timer and picture adjustment with [PICTURE / SLEEP]. TV/VCR • The menu changes as described below every time you press [PICTURE / SLEEP]. Press [POWER] to turn on the unit. Sleep Timer Use [CH. K / L] or the Number buttons to select your desired channel number.
T2203UD_EN.QX4 06.4.11 7:19 PM Page 10 TV/VCR SECTION TV OPERATION AND SETTINGS AUTOMATIC CLOCK SETTING CLOCK SET UP NOTES: TV/VCR Set the unit clock correctly for VCR timer recording. We suggest that you should set the clock manually when you first set up the unit, then set the auto clock setting to "ON" to correct the time periodically. • If a cable converter box is being used, make sure it is turned on. • You must use the remote control for the clock setting.
7:19 PM Page 11 DAYLIGHT-SAVING TIME CLOSED CAPTION SYSTEM Select this feature and the unit clock will automatically advance one hour in April, then reverse one hour in October. TV/VCR • First Sunday of April : At 2 AM, the clock immediately changes to 3 AM. Any timer programming you have set to occur between 2 AM and 3 AM will be canceled. TV/VCR You can view specially labeled (cc) TV programs, movies, news and pre-recorded tapes with either a dialogue caption or text display. 1 Press [SET-UP].
T2203UD_EN.QX4 06.4.11 7:19 PM Page 12 TV/VCR SECTION TV OPERATION AND SETTINGS A V-CHIP SET UP TV/VCR This feature enables parents to prevent their children from watching inappropriate material on TV. When you try to access a blocked program, “PROTECTED PROGRAM by ...” message appears on the TV screen. 4 1 2 Press [SET-UP]. Use [K / L] to select "V-CHIP SET UP", then press [ENTER]. Use the Number buttons to enter the access code.
4 Page 13 C MPAA RATING SET UP Use [K / L] to point to your desired item, then press [ENTER] to select "BLOCK" or "VIEW". Selection G PG PG-13 R NC-17 X 5 7:19 PM 4 G PG PG–13 B R NC–17 X [VIEW] [VIEW] [VIEW] [BLOCK] [BLOCK] [BLOCK] Rating Category Explanations General Audience Parental Guidance suggested.
T2203UD_EN.QX4 06.4.11 7:19 PM Page 14 TV/VCR SECTION ON-SCREEN DISPLAY STATUS DISPLAY CHECKING THE STATUS On screen display examples are shown below. 1 2 PLAY B HIFI 12:00AM CH 123 STEREO/SAP TV/VCR 4 5 6 TV/VCR While receiving a broadcast or playing a VHS tape, you can check the status displayed on the screen by pressing [DISPLAY]. You can also check the status of the preset MTS (MultiChannel Television sound). The display will change as shown below each time you press [DISPLAY].
T2203UD_EN.QX4 06.4.11 7:19 PM Page 15 VIDEO CASSETTE ERASE PREVENTION TV/VCR SECTION This unit will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes. Break off the tab on the back edge of the cassette to prevent accidental erasing of recording. SELECTING TAPE SPEEDS Before recording, select the tape speed from : SP mode (Standard Play) or SLP mode (Super Long Play).
T2203UD_EN.QX4 06.4.11 7:19 PM Page 16 TV/VCR SECTION SPECIAL PLAYBACK RENTAL PLAYBACK AUTO REPEAT PLAYBACK This function enables you to improve the picture quality when playing back worn cassettes such as rented tapes. 1 2 Press [SET-UP]. Use [K / L] to point to "USER’S SET UP", then press [ENTER]. Use [K / L] to point to "RENTAL". Press [ENTER] to select "ON". TV/VCR This function allows you to repeat a tape indefinitely.
7:19 PM Page 17 PICTURE SEARCH INDEX SEARCH This function is useful in finding or skipping over a particular scene on a tape. In this mode, the sound will be muted. TV/VCR 1 During playback, press [REV E] or [FWD D] to view at a high speed (in forward/reverse). 2 Press [REV E] or [FWD D] again to view at super high speed (in LP/SLP modes only). NOTE: • Tapes recorded in the SP or LP mode will normally display a noise bar on the TV screen and the picture may revert to black and white.
T2203UD_EN.QX4 06.4.11 7:19 PM Page 18 TV/VCR SECTION RECORDING NOTES: • Insert a cassette tape with its erase-prevention tab in place. • This unit cannot record the contents from the built-in DVD. • You can ONLY watch the same TV program that is being recorded. OTR (One Touch Recording) This function enables you to start recording for specified length simply by pressing [REC/OTR] on the unit. 1 NORMAL RECORDING 1 Use [CH. K / L] or the Number TV/VCR buttons to select the channel to be recorded.
7:19 PM Page 19 AUTOMATIC TIMER RECORDING TV/VCR You can set 8 programs to record on specific days, daily or weekly within 1 year period. In the example below, the timer is being set to record: DATE: 5 6 July 3rd, 2006 1 CH61 TAPE SPEED: SP Press [SET-UP]. Use [K / L] to select "TIMER PROGRAMMING", then press [ENTER]. NOTE: 7 3 Use [K / L] to select the desired program position, then B].
T2203UD_EN.QX4 06.4.11 7:19 PM Page 20 TV/VCR SECTION RECORDING ABOUT OVERLAP OF PROGRAMS TO CORRECT A PROGRAM AFTERWARD When programs overlap, a program may not be recorded. 1 Press [POWER] to turn on the unit. 2 Repeat steps 1 to 2 of "AUTOMATIC TIMER RECORDING" on page 19. 3 B] (or press [s s] to go back one step) Press [B until the part you want to correct begins flashing, then use [K / L] to make the changes. Press [ENTER] to confirm. 4 Press [POWER] to set automatic timer recording.
7:19 PM Page 21 AUTO RETURN This function allows you to automatically search the beginning of the recorded program(s) after timer recording finishes. 1 2 3 Press [SET-UP]. Use [K / L] to point to "USER’S SET UP", then press [ENTER]. Use [K / L] to point to "AUTO RETURN", then press [ENTER] to select "ON".
T2203UD_EN.QX4 06.4.
T2203UD_EN.QX4 06.4.11 7:19 PM Page 23 PLAYING A DISC FAST FORWARD / FAST REVERSE BASIC PLAYBACK 1 Press [POWER] to turn on the 2 Press [OPEN/CLOSE A] on the unit. 3 Place the disc in the tray, with the label facing up. • Every time you press and hold the button, playback speeds up and the level of the speed appears on the screen. D1 NOTES: 4 • For DVDs, fast forward/reverse speed is different depending on the disc. Approximate speed is 1 (×2), 2 (×8), 3 (×20), 4 (×50) and 5 (×100).
T2203UD_EN.QX4 06.4.11 7:19 PM Page 24 DVD SECTION SPECIAL PLAYBACK FUNCTIONS & SETTINGS FUNCTION TABLE Setting menu switches as below every time you press [MODE] during playback. See the reference page for how to set each menu. Some functions are not available in specific modes, but this is not a malfunction. DVD-V CD Press [MODE] Press [MODE] AUDIO MENU (p25) SUBTITLE MENU (p25) STEREO L-ch R-ch OFF SUBTITLE STREAM 1 .... SUBTITLE STREAM 32 V.S.S. MENU (p26) OFF 1 2 ANGLE 1 ....
7:19 PM Page 25 AUDIO MENU ANGLE MENU AUDIO LANGUAGE Some DVD discs contain scenes which have been shot from various angles and you can change them as you like. You can select audio language during DVD playback (if multi languages are available). 1 Press [MODE] during playback. 2 Use [K / L] to select your desired language. 1 During playback, press [MODE] repeatedly until ANGLE menu appears. 2 Use [K / L] to select your desired angle. 3 Press [RETURN] to exit the menu. 1.ENG Dolby D 3/2.
T2203UD_EN.QX4 06.4.11 7:19 PM Page 26 DVD SECTION SPECIAL PLAYBACK FUNCTIONS & SETTINGS BLACK LEVEL MENU SEARCH MENU You can adjust the Black Level to make the black parts of the picture brighter. You can begin playback at a specific track, title, chapter or from a specific point on a disc. 1 TRACK SEARCH 2 During playback, press [MODE] repeatedly until BLACK LEVEL menu appears. OFF (BLACK LEVEL) 1 Use [K / L] to select "ON" or "OFF". • ON: Makes the dark parts brighter.
7:19 PM Page 27 TIME SEARCH REPEAT PLAYBACK 1 During playback, press [MODE] repeatedly until SEARCH menu appears. REPEAT TRACK 2 Use [K / L] repeatedly to display TIME SEARCH menu. 3 Within 60 seconds, use the Number buttons to enter a desired disc time. Playback will start at the specified time. 0:0 _:_ _ TOTAL 1 During playback, press [MODE] repeatedly until REPEAT menu appears. 2 Use [K / L] to select your desired repeat mode. 0:04:23 • Press [CLEAR] to erase the incorrect input.
T2203UD_EN.QX4 06.4.11 7:19 PM Page 28 DVD SECTION SPECIAL PLAYBACK FUNCTIONS & SETTINGS PROGRAMMED PLAYBACK 5 You can determine the playing order of tracks. 1 In the stop mode, press [MODE]. PROGRAM • The PROGRAM screen appears. CD-DA 1 2 3 4 5 6 7 ENTER PLAY CLEAR 2 Use [K / L] to select a track, then press [ENTER]. TOTAL 0:00:00 3:40 4:30 5:00 3:10 5:10 1:30 2:30 1/4 • REPEAT setting is available during programmed playback. (Refer to "REPEAT TRACK" on page 27.
T2203UD_EN.QX4 06.4.11 7:19 PM Page 29 CHANGING THE DVD SET UP ITEMS You can change the DVD player’s settings by pressing [SET-UP] in DVD mode. The set up items are shown in the diagram below. CUSTOM INITIALIZE LANGUAGE (p29) AUDIO SUBTITLE DISC MENU DISPLAY (p30) TV MODE STILL MODE TV MODE DRC DOWN SAMPLING DOLBY DIGITAL AUDIO (p30) DOLBY DIGITAL PARENTAL (p30) OTHERS (p31) CUSTOM MENU 1 In the stop mode, press A SETUP [SET-UP] twice to display the DVD SETUP menu.
T2203UD_EN.QX4 06.4.11 7:19 PM Page 30 DVD SECTION CHANGING THE DVD SET UP ITEMS B 4 C DISPLAY SETTING Use [K / L] to select an item, then press [ENTER]. SETUP DISPLAY TV MODE STILL MODE 4:3 LETTER BOX AUTO • TV MODE: QUICK You can change certain aspects of the DVD display screens and on-screen messages on the TV screen. • 4:3 LETTER BOX (default): To show black bars on top and bottom of the screen. • 4:3 PAN & SCAN: To show a full height picture with both sides trimmed.
7:19 PM Page 31 E 6 7 K / L] to select the Use [K desired level, then press [ENTER]. SETUP OTHERS SETTING PARENTAL 4 PARENTAL LEVEL ALL 8 [ADULT] 7 [NC-17] 6 [R] Press [SET-UP] to exit the menu. Use [K / L] to select an item, then press [ENTER] repeatedly to set the feature "ON" or "OFF". SETUP OTHERS ANGLE ICON AUTO POWER OFF ON ON • ANGLE ICON: • ON: To show the angle icon when multiple camera angles are available during DVD playback. (default) • OFF: To keep angle icon from the display.
T2203UD_EN.QX4 06.4.11 7:19 PM Page 32 TROUBLESHOOTING GUIDE If the unit does not perform properly when operated as instructed in this Owner’s Manual, check the following guide for the possible remedy of a problem before contacting the Customer Service. Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked possibilities. It could save your time and money.
06.4.11 7:19 PM Page 33 SYMPTOM POSSIBLE REMEDY PAGE TV/VCR mode Misspelling in captions • Error committed by the closed captioning production company. • Possible in a live broadcast. Not in case of a prerecorded program. --- Text is not shown in its entirety or a delay occurs from what is being said • A few seconds of delay is common for live broadcast.
T2203UD_EN.QX4 06.4.11 7:19 PM Page 34 MAINTENANCE DEGAUSSING CABINET CLEANING A degaussing circuit in this unit clears up color errors on the TV screen. Color errors occur when there is any excess magnetism close to the unit. This circuit is designed to operate once when the unit is first plugged in. If you see minor color errors on the screen, unplug the unit for approximately 30 minutes. When you plug the unit again, the degaussing circuit will operate to clear errors.
T2203UD_EN.QX4 06.4.
T2203UD_EN.QX4 06.4.11 7:19 PM Page 36 SPECIFICATIONS GENERAL SPECIFICATIONS TV/VCR CRT: Television system: Closed caption system: Video Heads: Tape width: Tape speed SP: LP: SLP: Tuner channel TV VHF Low: TV VHF High: TV UHF: CATV VHF: MID band: SUPER band: HYPER band: Sound output: 24 inch in-line gun, 90˚ deflection tube NTSC-M §15.119/FCC Rotary four-head 1/2 inch 33.40 mm/sec. 16.67 mm/sec. 11.12 mm/sec.
T2203UD_ES.QX4 06.3.2 1:38 PM Page 37 ÍNDICE DE CONTENIDO PREPARATIVOS PARA EL USO . . . . . . . . . . . .37 CONEXIONES DE ANTENA/CABLE . . . . . . . . . . .37 CONEXIÓN A UN DISPOSITIVO EXTERNO (FRONTAL) . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 CONEXIÓN A UN DISPOSITIVO DE AUDIO DIGITAL (TRASERA) . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 REPRODUCCIÓN . . . . . . . . . . . . . . . . . . . . . . .41 REPRODUCCIÓN BÁSICA . . . . . . . . . . . . . . . . . .41 GRABACIÓN . .
T2203UD_ES.QX4 06.3.2 1:38 PM Page 38 PREPARATIVOS PARA EL USO CONEXIÓN A UN DISPOSITIVO EXTERNO (FRONTAL) Cuando vea un programa grabado en otra fuente (videograbadora o videocámara), utilice las tomas de entrada AUDIO/VIDEO en la parte frontal de la unidad. Conecte las tomas de salida de Audio/Video de otra fuente a las tomas AUDIO L/R y VIDEO de esta unidad. A continuación, utilice [SELECT] o [CH. K / L] hasta que aparezca "AUX" en la pantalla. POWER Por ejemplo, videograbadora o videocámara, etc.
T2203UD_ES.QX4 06.3.2 1:38 PM Page 39 SECCIÓN TV/VCR FUNCIONAMIENTO Y AJUSTES DEL TELEVISOR Después de finalizar la conexión de la antena o del cable, conecte el cable de alimentación a una toma estándar de CA. 2 3 Presione [POWER] para encender la unidad. TV/VCR Ajuste correctamente el reloj de la unidad para grabación con temporizador para videograbadora.
T2203UD_ES.QX4 06.3.2 1:38 PM Page 40 SECCIÓN TV/VCR FUNCIONAMIENTO Y AJUSTES DEL TELEVISOR IDIOMA DE MENÚ DE PANTALLA AJUSTE DE CANAL Es necesario preseleccionar el canal al principio o en caso de haber movido el televisor a una zona distinta. TV/VCR AUTOPROGRAMACIÓN DEL CANAL 1 Presione [SET-UP]. K / L] para ir hasta Utilice [K "AJUSTE DE CANAL", y presione [ENTER]. 2 K / L] para ir hasta Utilice [K "AUTOPROGRAMACIÓN DE CA.", y presione [ENTER]. - TV/VCR PREP.
1:38 PM Page 41 REPRODUCCIÓN GRABACIÓN REPRODUCCIÓN BÁSICA NOTAS: 1 Inserte una cinta pregrabada para encender la unidad automáticamente (Auto Power On/Actividad automática). 2 Seleccione el modo TV/VCR presionando [SELECT]. TV/VCR GRABACIÓN NORMAL NOTA: • Si se ha quitado la lengüeta de protección contra borrado, la unidad cambiará en el modo VCR y empezará la reproducción automáticamente. 3 Para iniciar la reproducción, presione [PLAY B].
T2203UD_ES.QX4 06.3.2 1:39 PM Page 42 SECCIÓN TV/VCR GRABACIÓN GRABACIÓN CON TEMPORIZADOR AUTOMÁTICO 5 TV/VCR Puede ajustar ocho programas para grabar en días concretos, diariamente o semanalmente, dentro de un periodo de un año. 6 En el siguiente ejemplo, el temporizador está ajustado para grabar: FECHA: 3 de julio de 2006 HORA DE AJUSTE: de7:30PM a 8:50PM CANAL: CA61 Presione [SET-UP]. Utilice [K / L] para seleccionar "COMO PROGRAMAR", y presione [ENTER]. 7 - TV/VCR PREP.
T2203UD_ES.QX4 06.3.2 1:39 PM Page 43 SECCIÓN DVD AVANCE RÁPIDO / RETROCESO RÁPIDO REPRODUCCIÓN BÁSICA 1 Presione [POWER] para encender la unidad. 2 Presione [OPEN/CLOSE A] en la unidad. 3 Coloque el disco en la bandeja, con la etiqueta hacia arriba. NOTAS: • En los discos DVD, la velocidad de avance/retroceso rápido es diferente según el disco. La velocidad aproximada es 1 (×2), 2 (×8), 3 (×20), 4 (×50) y 5 (×100). • En discos de CD de audio la velocidad aproximada es 1 (×2), 2 (×8) y 3 (×30).
T2203UD_EN.QX4 06.4.11 7:19 PM Page 37 FUNAI CORPORATION LIMITED WARRANTY FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded from this warranty. LABOR: FUNAI CORP.