Communications Diagnostics if there's a problem transferring data between the computer and the printer, try putting the printer in the Communications Diagnostics Mode (also referred to as the “DUMP” mode). The printer will print the ASCII characters and their and their text representation (or the priced , if not a printable character) for any data received from the host computer To enter Communications Diagnostics Mode: 1.
SH = NOTE.Printer specifications are subject to change without notice. Printing Specifications Print Density 203 dots finch {8 dosimeter) hn 4" per second (101.6 rom per second) Distance from Print Element to Top of Form E71" {14.5 tm) 116 dots Memory/Communications Specifications Flash Memory 1 MB flash (standard); 2MB flash {optional} Standard serial port (8 Pin circular DIN connector) Communications. Configurable Baud rate (from 9800 to 57.6 Bps, parity and data bits.
Label Specifications Label/Tag Width 1.57 to 3.1" (38.1 mn to 78.4 mm) standard memory. Max Label): 167.406 4 mny preferred) 2mm preferred) Inter-label Gap, Label Roll Size; Max. Diameter 2625" (68.7 mn} O.D. inner Core 75" (19 mn} std, 1.38" (35.05 mm) optional Diameter Use Zebra-brand direct thermal media that is outside wound, Media may be reflective (black mark) sensing or trans missive (gap) sensing, die-cut, continuous or liner less. For die-cut labels, use only full auto dies.
Physical/Environmental/Electrical Specifications 3.9" 107.9 mm] ar RL__18 178.7 mmf a0 83" 1203.2 mi] {210.2 mm} 4.60" 115.8 mm; Figure 18 Overall DIMENSIONS Weight wi battery 1.66 Ibs. {76 kg. ) excluding media. LEIS |e dsr Cased ra Relative Humidity Operation 10% to 80% (non-condensing) Storage 10% to 90% (non-condensing) 40 Ql.
Communications Port Signal Pin# | Name Description 1 RXD Receive Data Transfinite Data 3 CTS Clear To Send Require Ground Data Set Ready fow to high transition turns printer on, high to low transition turns printer off {if enable, nee J 8 Fare 19 Communications Port (8 pin Circular DIN) QL 320 User's Guide 41
Agency Approvals + FCC Part 15 Subpart B Class A Electromagnetic Radiation Standard + Built to UL, CUL and TUV standards + EN50082-1 International Immunity Standard + EN55022 Class B European Electromagnetic Radiation Standard Accessories + Adjustable shoulder strap + Protective soft case + Extra battery packs 120-230 VAC battery charger + Desk Mount + Data cables For details, call your authorized Zebra re-seller. .
Appendix A Interface Cables Part Number ‘BL 11757-000; 8-Pin DIN to 8-Pin DB PC Cable This part is also available as a coiled cable under Part Number BL150683-1.
Appendix B Media Supplies To insure maximum printer life and consistent print quality and performance for your individual application, it is recommended that only media produced by Zebra be used. These advantages include: + Consistent quality and reliability of media products. +» Large range of stocked and standard formats. + In-house custom format design service. » Large production capacity which services the needs of many large and small media consumers including major retell chains world wide.
Appendix C Maintenance Supplies In-addition to using quality media provided by Zebra, it is recompile mended that the printer be cleaned as prescribed in the maintain nuance section. The following items are available for this purpose: + Cleaning Pen (10 pack), Reorder No. AN11209-1 + Cleaning Kit with Cleaning Pen, and Cotton Swabs, Reorder No.
Appendix D Product Support When calling with a specific problem regarding your printer, please have the following information on hand: + Model numberless (e.g. QL 320) « Unit serial number (Found on the large label on the back of the printer) + Product Configuration Code (PCC) (15 digit number found on the small label on the back of the unit) Contact the Help Desk at: Zebra Technologies Corporation 30 Plan Way Warwick, Rhode Island 02886-1012 USA Telephone: +1 401.739.5800 Fax: +1 401.732.
A Accessories 42 Agency Approvals 42 B Battery, charging 9 while printing 9 Battery, installing 9 Battery life, tips 29 Belt clip 25, 28 Bluetooth Device Address {LAMBDA.
tent Information This product and for its use may be covered by one or more of the following US patents and corresponding international patents worldwide D275,286 5,017,765 5,304,788 5479441 5,809,233 D347,021 8,021,641 5,304,783 5486057 5676,720 D380, 178 5,029,183 5,321,246 5,503,483 5,978,004 D430,199 5,047 817 5,335,170 5,504,322 5,8085,128 D433,702 5,103,461 5,384,133 5,528,621 5,897,193 3,864,673 5113446 5,367,151 5532469 6,004,053 4,018,676 5,140,144 5372438 5,543,610 8,010,267 4,044,948 5,132,709 5,