MN001103A01a.
MN001103A01a.fm Page 2 Monday, March 23, 2015 2:50 PM 2 CONCIERGE CC5000-10 Zebra reserves the right to make changes to any product to improve reliability, function, or design. Zebra does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described in this guide.
MN001103A01a.fm Page 3 Monday, March 23, 2015 2:50 PM Setup and Installation Guide 3 Concierge CC5000-10 Features 10 in.Touchscreen Display Audio Microphone Front Facing Video Camera Bar Code Scanner External Speakers Figure 1. Front View VESA Mounting Holes (M4 Threaded) Figure 2.
MN001103A01a.fm Page 4 Monday, March 23, 2015 2:50 PM 4 CONCIERGE CC5000-10 Activity LED Micro USB OTG Port Micro HDMI Out Port USB Ports Figure 3. Ports RJ45 Ethernet Port, PoE Enabled Diagnostic Mode Buttons Overview The Concierge CC5000-10 is a pre-assembled system consisting of the following: • 10.1 in.
MN001103A01a.fm Page 5 Monday, March 23, 2015 2:50 PM Setup and Installation Guide • Do not use abrasive cleaners, waxes or solvents for cleaning. • Do not operate the product under the following conditions: • Extremely hot, cold, or humid environments. • Near any appliance generating a strong magnetic field. • In direct sunlight. 5 Configuration Notes The instructions, and screen captures in this guide describe default software applications included with the Concierge CC5000-10.
MN001103A01a.fm Page 6 Monday, March 23, 2015 2:50 PM 6 CONCIERGE CC5000-10 To mount the Concierge CC5000-10 using the appropriate mounting bracket: 1. The Concierge CC5000-10 mounting inserts are M4 x 10 mm. When selecting the appropriate screw length, ensure its length safely engages the threads, but does not penetrate the Concierge CC5000-10 bezel enclosure more than 0.39 in./10 mm. 1.3 in (34 mm) 10.3 in (262 mm) 3.9 in (100 mm) .5 in (34 mm) 8.2 in (208 mm) 1.8 in (46 mm) 3.9 in (100 mm) 2.
MN001103A01a.fm Page 7 Monday, March 23, 2015 2:50 PM Setup and Installation Guide 7 Entering Admin Mode To enter into Admin mode: 1. Touch and hold the area in the bottom right of the Home page for five seconds to activate the Admin pass code keypad. Figure 5. Home Page 2. Touch the appropriate numbers on the keypad to enter the pass code, and press to enter Admin mode. Figure 6. Admin Home Page NOTE The default pass code for Admin mode is 5678.
MN001103A01a.fm Page 8 Monday, March 23, 2015 2:50 PM 8 CONCIERGE CC5000-10 Connecting to a WLAN Network To set up a WLAN network: 1. Enter Admin mode by following the steps in Entering Admin Mode on page 7. 2. 3. Touch (Settings icon) to display the Settings screen (see Figure 7). Ensure Wi-Fi is set to ON; then select the desired Wi-Fi network. If the network is encrypted, a prompt displays to enter the network password 4. When successfully connected, press to exit Admin mode. Figure 7.
MN001103A01a.fm Page 9 Monday, March 23, 2015 2:50 PM Setup and Installation Guide 4. Select Ethernet; then select 9 to configure your Ethernet connection. Figure 8. Ethernet Settings 5. When successfully connected, press to exit Admin mode. Additional Administrative Options Refer to the online CC5000 CUSTOMER CONCIERGE Product Reference Guide (p/n MN000209Axx) for instructions regarding additional administrative options for the Concierge CC5000-10. For more information go to: https://developer.
MN001103A01a.fm Page 10 Monday, March 23, 2015 2:50 PM 10 CONCIERGE CC5000-10 Regulatory Information This guide applies to the following Model Number: CC5000-10. All Symbol devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required. Local language translations are available at the following website: www.zebra.
MN001103A01a.fm Page 11 Monday, March 23, 2015 2:50 PM Setup and Installation Guide • • • • • • • • • 11 Reduce or eliminate excessive force Keep objects that are used frequently within easy reach Perform tasks at correct heights Reduce or eliminate vibration Reduce or eliminate direct pressure Provide adjustable workstations Provide adequate clearance Provide a suitable working environment Improve work procedures.
MN001103A01a.fm Page 12 Monday, March 23, 2015 2:50 PM 12 CONCIERGE CC5000-10 Pour satisfaire aux exigences Américaines et Canadiennes d'exposition aux radiofréquences, un dispositif de transmission doit fonctionner avec une distance de séparation minimale de 0 cm ou plus de corps d'une personne. Canadian Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.
MN001103A01a.fm Page 13 Monday, March 23, 2015 2:50 PM Setup and Installation Guide 13 equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment and receiver • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected • Consult the dealer or an experienced radio/TV technician for help.
MN001103A01a.fm Page 14 Monday, March 23, 2015 2:50 PM 14 CONCIERGE CC5000-10 in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual. Korea Warning Statement for Class B ITE 기종별 사용자안내문 B 급 기기 ( 가정용 방송통신기자재 ) 이 기기는 가정용 (B 급 ) 전자파적합기기로서 주로 가정에서 사용하는 것을 목적으로 하며 , 모든 지역에서 사용할 수 있습니다 . Other Countries Australia Use of 5GHz RLAN’s in Australia is restricted in the following band 5.50 – 5.65GHz.
MN001103A01a.fm Page 15 Monday, March 23, 2015 2:50 PM Setup and Installation Guide 15 Mexico Restrict Frequency Range to: 2.450 - 2.4835 GHz. La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.
MN001103A01a.fm Page 16 Monday, March 23, 2015 2:50 PM 16 CONCIERGE CC5000-10 Dansk: Til kunder i EU: Alle produkter skal returneres til Zebra til recirkulering, når de er udtjent. Læs oplysningerne om returnering af produkter på: http://www.zebra.com/weee. Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen am Ende ihrer Lebensdauer zum Recycling an Zebra zurückgesandt werden. Informationen zur Rücksendung von Produkten finden Sie unter http://www.zebra.com/weee.
MN001103A01a.fm Page 17 Monday, March 23, 2015 2:50 PM Setup and Installation Guide 17 Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van hun levensduur naar Zebra te worden teruggezonden voor recycling. Raadpleeg http://www.zebra.com/weee voor meer informatie over het terugzenden van producten. Românesc: Pentru clienţii din UE: Toate produsele, la sfârşitul duratei lor de funcţionare, trebuie returnate la Zebra pentru reciclare.
MN001103A01a.fm Page 18 Monday, March 23, 2015 2:50 PM 18 CONCIERGE CC5000-10 You shall not distribute, sub license, rent, loan, lease, export, re-export, resell, ship or divert or cause to be exported, re-exported, resold, shipped or diverted, directly or indirectly, the Products under this Agreement.
MN001103A01a.fm Page 19 Monday, March 23, 2015 2:50 PM Setup and Installation Guide 19 U.S. Government. If you are acquiring the Products on behalf of any unit or agency of the U.S. Government, the following shall apply. Use, duplication, or disclosure of the Products is subject to the restrictions set forth in subparagraphs (c) (1) and (2) of the Commercial Computer Software Restricted Rights clause at FAR 52.227-19 (JUNE 1987), if applicable, unless being provided to the Department of Defense.
MN001103A01a.fm Page 20 Monday, March 23, 2015 2:50 PM Zebra Technologies Corporation http://www.zebra.com Zebra and the stylized Zebra head are trademarks of ZIH Corp., registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. ©2015 ZIH Corp and/or its affiliates. All rights reserved.