D i 8 r 0 2 .
D i 8 r 0 2 . e c t R a d 1 i 1 b S e q o C O E M u e n c a r d e © 2001 SYMBOL TECHNOLOGIES, INC. All rights reserved. Symbol reserves the right to make changes to any product to improve reliability, function, or design. Symbol does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein.
Q u i c k R e f e r e n c e Regulatory Information All Symbol devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required. Any changes or modifications to Symbol Technologies equipment, not expressly approved by Symbol Technologies, could void the user's authority to operate the equipment. Applying the Regulatory Country Stamp A regulatory label is applied to the card.
Q R G T i t l e 2. Apply the country stamp on the bottom right-hand corner of the regulatory label. Affix country stamp here. For countries that have not received regulatory approval, an adhesive country stamp is not enclosed. Refer to http:// www.symbol.com/wireless for the latest list of approved countries. Operation of the device without a regulatory label or the correct country stamp is illegal.
Q u i c k R e f e r e n c e Remote and Standalone Antenna Configurations To comply with FCC RF exposure requirements, antennas that are mounted externally at remote locations or operating near users at stand-alone desktop of similar configurations must operate with a minimum separation distance of 20 cm from all persons. Wrist Worn Devices: To comply with FCC RF exposure requirements, this device must be worn on the user's wrist while it is in use.
Q R G • • T i t l e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help. Note: For a Class A Device: (Note: Symbol devices are normally Class B) Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules.
Q u i c k • • • • R e f e r e n c e Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400 -2.4835 GHz France, equipment is restricted to 2.4465 -2.4835 GHz frequency range Belgium outside usage, the equipment is restricted to 2.460 -2.4835 GHz frequency range Italy requires a user license for outside usage. Statement of Compliance for radio devices Symbol Technologies, Inc.
Service Information Before you use the unit, it must be configured to operate in your facility’s network and run your applications. If you have a problem running your unit or using your equipment, contact your facility’s Technical or Systems Support.
