User Guide
Table Of Contents
- Patents This product is covered by one or more of the following U.S. and foreign Patents:
- U.S. Patent No. 4,593,186; 4,603,262; 4,607,156; 4,652,750; 4,673,805; 4,736,095; 4,758,717; 4,760,248; 4,806,742; 4,816,660; 4,845,350; 4,896,026; 4,897,532; 4,923,281; 4,933,538; 4,992,717; 5,015,833; 5,017,765; 5,021,641; 5,029,183; 5,047,...
- Invention No. 55,358; 62,539; 69,060; 69,187, NI-068564 (Taiwan); No. 1,601,796; 1,907,875; 1,955,269 (Japan); European Patent 367,299; 414,281; 367,300; 367,298; UK 2,072,832; France 81/ 03938; Italy 1,138,713
- rev. 06/02
- 72-63596-01 Revision A- May 2003
- © 2003 SYMBOL TECHNOLOGIES, INC. All rights reserved.
- Symbol and UPS' rights and obligations with relation to the DIAD IV product, including without limitation product liability and license grants, will be in accordance with Purchase Agreements number: 2001 - 11204 - 01, 2001 - 11204 - 02 and 20...
- Symbol reserves the right to make changes to any product to improve reliability, function, or design.
- Symbol and the Symbol logo are registered trademarks of Symbol Technologies, Inc. Other product names mentioned in this manual may be trademarks or registered trademarks of their respective companies and are hereby acknowledged.
- Symbol Technologies, Inc. One Symbol Plaza Holtsville, N.Y. 11742-1300 http://www.symbol.com
- Hearing Aids
- Other Medical Devices
- The device transmits radio frequency energy and has the potential to interfere with inadequately protected medical devices. Consult your physician or the manufacturer of the device to see if the particular device has sufficient protection.
- It is good practice to turn OFF the device within a hospital or other medical facility where sensitive medical equipment is in use. In some countries, this is a legal requirement applying to all mobile phones and related equipment.
- Warning Notices
- Potentially Hazardous Atmospheres
- FCC RF Exposure Guidelines
- Safety Information
- Reducing RF Influence - Use Properly
- It is advisable to use the device only in the normal operating position.
- This device was tested for typical body-worn operation. The use of third-party belt-clips, holsters, and similar accessories should not contain metallic components in its assembly. The use of these accessories that do not satisfy these requir...
- Laser Devices
- Symbol devices using lasers comply with US 21CFR1040.10, and IEC825-1:1993, EN60825-1:1994+A11:1996. The laser classification is marked on one of the labels on the device.
- Class 1 Laser devices are not considered to be hazardous when used for their intended purpose. The following statement is required to comply with US and international regulations:
- Caution: Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous laser light exposure.
- Class 2 laser scanners use a low power, visible light diode. As with any very bright light source, such as the sun, the user should avoid staring directly into the light beam. Momentary exposure to a Class 2 laser is not known to be harmful.
- Statement of Compliance
- Symbol Technologies, Inc., hereby, declares that this device is in compliance with the essential requirements and other relevant provisions of Directives 1999/5/EC, 89/336/EEC and 73/23/EEC. Declaration of Conformities may be obtained from ht...
- Other Countries:
- Mexico - Restrict Frequency Range to: 2.450 - 2.4835 GHz.
- Israel - Restrict Frequency Range to: 2.418 - 2.457 GHz.
- Sri Lanka - Restrict Frequency Range to: 2.400 - 2.430 GHz.
- In accordance with Clause 5, IEC 825 and EN60825, the following information is provided to the user:
- ENGLISH HEBREW
- CLASS 1 CLASS 1 LASER PRODUCT
- CLASS 2 LASER LIGHT
- DO NOT STARE INTO BEAM
- CLASS 2 LASER PRODUCT
- DANISH / DANSK ITALIAN / ITALIANO
- KLASSE 1 KLASSE 1 LASERPRODUKT CLASSE 1 PRODOTTO AL LASER DI CLASSE 1
- KLASSE 2 LASERLYF CLASSE 2 LUCE LASER
- SE IKKE IND I STRÅLEN NON FISSARE IL RAGGIOPRODOTTO
- KLASSE 2 LASERPRODUKT AL LASER DI CLASSE 2
- DUTCH / NEDERLANDS NORWEGIAN / NORSK
- KLASSE 1 KLASSE-1 LASERPRODUKT KLASSE 1 LASERPRODUKT, KLASSE 1
- KLASSE 2 LASERLICHT KLASSE 2 LASERLYS IKKE STIRR INN I LYSSTRÅLEN
- NIET IN STRAAL STAREN LASERPRODUKT, KLASSE 2
- KLASSE-2 LASERPRODUKT
- FINNISH / SUOMI PORTUGUESE / PORTUGUÊS
- LUOKKA 1 LUOKKA 1 LASERTUOTE CLASSE 1 PRODUTO LASER DA CLASSE 1
- LUOKKA 2 LASERVALO CLASSE 2 LUZ DE LASER NÃO FIXAR O RAIO LUMINOSO
- ÄLÄ TUIJOTA SÄDETTÄ PRODUTO LASER DA CLASSE 2
- LUOKKA 2 LASERTUOTE
- FRENCH / FRANÇAIS SPANISH / ESPAÑOL
- CLASSE 1 PRODUIT LASER DE CLASSE 1 CLASE 1 PRODUCTO LASER DE LA CLASE 1
- CLASSE 2 LUMIERE LASER CLASE 2 LUZ LASER
- NE PAS REGARDER LE RAYON FIXEMENT NO MIRE FIJAMENTE EL HAZ
- PRODUIT LASER DE CLASSE 2 PRODUCTO LASER DE LA CLASE 2
- GERMAN / DEUTCH SWEDISH / SVENSKA
- KLASSE 1 LASERPRODUKT DER KLASSE 1 KLASS 1 LASERPRODUKT KLASS 1
- KLASSE 2 LASERSTRAHLEN KLASS 2 LASERLJUS STIRRA INTE MOT STRÅLEN
- NICHT DIREKT IN DEN LASERSTRAHL SCHAUEN LASERPRODUKT KLASS 2
- LASERPRODUKT DER KLASSE 2
- For Vehicle installations and use
- 1. An air bag inflates with great force. DO NOT place objects, including either installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed...
- 2. Position your device within easy reach. Be able to access your device without removing your eyes from the road.
- 3. Do not take notes or use the device while driving to the point of distracting from driving. Reading or Jotting down text takes attention away from your primary responsibility, driving safely.
- Cell Phone/Terminal Warnings
- Effect on Vehicles
- RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles (including safety systems). Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufac...
- An air bag inflates with great force. DO NOT place objects, including either installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed an...
- Effect on Vehicles
- Safety on Aircraft
- Pacemakers
- It is recommended by pacemaker manufacturers that a minimum of 15cm (6 inches) be maintained between a handheld wireless phone and a pacemaker to avoid any possible interference with the pacemaker. These recommendations are consistent with in...
- Persons with Pacemakers:
- Regulatory Information
- All Symbol devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required.
- Any changes or modifications to Symbol Technologies equipment, not expressly approved by Symbol Technologies, could void the user's authority to operate the equipment.
- Antenna's, use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could cause damage and may violate regulations.
- Regulatory Information
- Radio Modules
- This device contains approved radio modules. These modules are identified below.
- This device incorporates the International Roaming feature (IEEE802.11d) which will ensure the product operates on the correct channels for the particular country of use.
- This device contains a Bluetooth qualified module, Bluetooth ID: B01039
- Health and Safety Recommendations
DIAD IV Terminal
Regulatory Information
Patents
This product is covered by one or more of the following U.S. and foreign Patents:
U.S. Patent No. 4,593,186; 4,603,262; 4,607,156; 4,652,750; 4,673,805; 4,736,095;
4,758,717; 4,760,248; 4,806,742; 4,816,660; 4,845,350; 4,896,026; 4,897,532; 4,923,281; 4,933,538;
4,992,717; 5,015,833; 5,017,765; 5,021,641; 5,029,183; 5,047,617; 5,103,461; 5,113,445; 5,130,520;
5,140,144; 5,142,550; 5,149,950; 5,157,687; 5,168,148; 5,168,149; 5,180,904; 5,216,232; 5,229,591;
5,230,088; 5,235,167; 5,243,655; 5,247,162; 5,250,791; 5,250,792; 5,260,553; 5,262,627; 5,262,628;
5,266,787; 5,278,398; 5,280,162; 5,280,163; 5,280,164; 5,280,498; 5,304,786; 5,304,788; 5,306,900;
5,324,924; 5,337,361; 5,367,151; 5,373,148; 5,378,882; 5,396,053; 5,396,055; 5,399,846; 5,408,081;
5,410,139; 5,410,140; 5,412,198; 5,418,812; 5,420,411; 5,436,440; 5,444,231; 5,449,891; 5,449,893;
5,468,949; 5,471,042; 5,478,998; 5,479,000; 5,479,002; 5,479,441; 5,504,322; 5,519,577; 5,528,621;
5,532,469; 5,543,610; 5,545,889; 5,552,592; 5,557,093; 5,578,810; 5,581,070; 5,589,679; 5,589,680;
5,608,202; 5,612,531; 5,619,028; 5,627,359; 5,637,852; 5,664,229; 5,668,803; 5,675,139; 5,693,929;
5,698,835; 5,705,800; 5,714,746; 5,723,851; 5,734,152; 5,734,153; 5,742,043; 5,745,794; 5,754,587;
5,762,516; 5,763,863; 5,767,500; 5,789,728; 5,789,731; 5,808,287; 5,811,785; 5,811,787; 5,815,811;
5,821,519; 5,821,520; 5,823,812; 5,828,050; 5,848,064; 5,850,078; 5,861,615; 5,874,720; 5,875,415;
5,900,617; 5,902,989; 5,907,146; 5,912,450; 5,914,478; 5,917,173; 5,920,059; 5,923,025; 5,929,420;
5,945,658; 5,945,659; 5,946,194; 5,959,285; 6,002,918; 6,021,947; 6,029,894; 6,031,830; 6,036,098;
6,047,892; 6,050,491; 6,053,413; 6,056,200; 6,065,678; 6,067,297; 6,082,621; 6,084,528; 6,088,482;
6,092,725; 6,101,483; 6,102,293; 6,104,620; 6,114,712; 6,115,678; 6,119,944; 6,123,265; 6,131,814;
6,138,180; 6,142,379; 6,172,478; 6,176,428; 6,178,426; 6,186,400; 6,188,681; 6,209,788; 6,209,789;
6,216,951; 6,220,514; 6,243,447; 6,244,513; 6,247,647; 6,308,061; 6,250,551; 6,295,031; 6,308,061;
6,308,892; 6,321,990; 6,328,213; 6,330,244; 6,336,587; 6,340,114; 6,340,115; 6,340,119; 6,348,773;
6,380,949; 6,394,355; D305,885; D341,584; D344,501; D359,483; D362,453; D363,700; D363,918;
D370,478; D383,124; D391,250;
D405,077; D406,581; D414,171; D414,172; D418,500; D419,548; D423,468; D424,035;
D430,158; D430,159; D431,562; D436,104.
Invention No. 55,358; 62,539; 69,060; 69,187, NI-068564 (Taiwan); No. 1,601,796; 1,907,875;
1,955,269 (Japan); European Patent 367,299; 414,281; 367,300; 367,298; UK 2,072,832; France 81/
03938; Italy 1,138,713
rev. 06/02
© 2003 SYMBOL TECHNOLOGIES, INC. All rights reserved.
Symbol and UPS' rights and obligations with relation to the DIAD IV product,
including without limitation product liability and license grants, will be in accordance
with Purchase Agreements number: 2001 - 11204 - 01, 2001 - 11204 - 02 and
2001 - 11204 - 03, dated February 13, 2003.
Symbol reserves the right to make changes to any product to improve reliability,
function, or design.
Symbol and the Symbol logo are registered trademarks of Symbol Technologies,
Inc. Other product names mentioned in this manual may be trademarks or
registered trademarks of their respective companies and are hereby
acknowledged.
Symbol Technologies, Inc.
One Symbol Plaza
Holtsville, N.Y. 11742-1300
http://www.symbol.com
72-63596-01
Revision A— May 2003
For Vehicle installations and use
1. An air bag inflates with great force. DO NOT place objects, including either
installed or portable wireless equipment, in the area over the air bag or in
the air bag deployment area. If in-vehicle wireless equipment is improperly
installed and the air bag inflates, serious injury could result.
2. Position your device within easy reach. Be able to access your device
without removing your eyes from the road.
3. Do not take notes or use the device while driving to the point of distracting
from driving. Reading or Jotting down text takes attention away from your
primary responsibility, driving safely.
Cell Phone/Terminal Warnings
Effect on Vehicles
RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles (including safety systems). Check with the
manufacturer or its representative regarding your vehicle. You should also
consult the manufacturer of any equipment that has been added to your vehicle.
An air bag inflates with great force. DO NOT place objects, including either
installed or portable wireless equipment, in the area over the air bag or in the air
bag deployment area. If in-vehicle wireless equipment is improperly installed and
the air bag inflates, serious injury could result.
Safety on Aircraft
You are required to switch OFF mobile phones when on board an aircraft as
operation may be dangerous and illegal.
Pacemakers
It is recommended by pacemaker manufacturers that a minimum of 15cm (6
inches) be maintained between a handheld wireless phone and a pacemaker to
avoid any possible interference with the pacemaker. These recommendations are
consistent with independent research and recommendations by Wireless
Technology Research.
Persons with Pacemakers:
• Should ALWAYS keep the device more than 15cm (6 inches) from their
pacemaker when turned ON
• Should not carry the device in a breast pocket
• Should use the ear furthest from the pacemaker to minimise the potential
for interference.
• If you have any reason to suspect that interference is taking place, turn OFF
your device.
Regulatory Information
All Symbol devices are designed to be compliant with rules and regulations in
locations they are sold and will be labeled as required.
Any changes or modifications to Symbol Technologies equipment, not expressly
approved by Symbol Technologies, could void the user's authority to operate the
equipment.
Antenna's, use only the supplied or an approved replacement antenna.
Unauthorized antennas, modifications, or attachments could cause damage and
may violate regulations.
Radio Modules
This device contains approved radio modules. These modules are identified
below.
• Symbol Compact Flash RLAN (11Mbps DSSS) radio card, Type: LA-4137
• Motorola Triband GSM GPRS module (G18), Type: MT3-411A21
• Symbol Bluetooth Module, Type: 21-58466
This device incorporates the International Roaming feature (IEEE802.11d)
which will ensure the product operates on the correct channels for the particular
country of use.
This device contains a Bluetooth qualified module, Bluetooth ID: B01039
Health and Safety Recommendations
Ergonomic Recommendations
Caution: Even the best-designed products can be a potential source of injury/
illness if used incorrectly. In order to avoid or minimize risk of ergonomic injury,
follow the general recommendations below. Consult with your local Health &
Safety Manager to ensure that you are meeting your company’s safety programs
to prevent employee injury.
• Reduce or eliminate repetitive motion
• Maintain a neutral posture and avoid awkward positions
• Reduce or eliminate excessive force
• Keep objects that are used frequently within easy reach
• Perform tasks at correct heights
• Reduce or eliminate vibration
• Reduce or eliminate direct pressure
• Provide adjustable workstations
• Avoid static exertions
• Provide adequate clearance
• Provide a suitable working environment
• Improve work procedures
• Take periodic rest breaks.