MODEL NO.
Warnings and Precautions TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. This symbol, located on back or bottom of the unit, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Important Safety Instructions 1. Read Instructions - All the safety and operating instruction should be read before the product is operated. 2. Retain Instructions - The safety and operating instruction should be retained for future reference. 3. Heed Warnings - All warning on the product and in the operating instructions should be adhered to. 4. Follow instructions - All operating and use instructions should be followed. 5. Cleaning - Unplug this product from the wall outlet before cleaning.
Features In the Box CD player: CD, CD-R/RW Detachable AC Cord AM/FM radio Documentation Auxiliary input Programmable CD tracks 2-digit red LED Built-in speakers AC power: detachable AC cord DC power: requires 6 C batteries, not included Powering the Unit AC Power Plug the detachable AC cord into a standard AC outlet (120V~60Hz) AUX AC ~ Battery Power Requires 6 C batteries, not included.
7 RPT PROG ON 2 PROG REPEAT PLAY / PAUSE 1 6 3 5 8 AUX 9 AC ~ 10 5 4
Control Definitions 1. Stop Button Press the Stop Button to stop a CD during play. 2. Program Button 3. Skip/Search Buttons Press the Program Button, in CD mode, to program up to 20 CD tracks. Press the Skip/Search Buttons to skip between CD tracks. Press and hold the Skip/Search Buttons to search through a single CD track. 4. Volume Dial 5. Auxiliary Input Turn the Volume Dial to adjust the volume of the unit. Use the Auxiliary Input to connect an external audio source (MP3 player) to the unit. 6.
Tuning the AM or FM Radio Step 1: • Adjust the Power Switch to AM or FM mode. Both AM/FM antenna is built into the unit. Adjust the unit to improve reception. Step 2: Turn the Tuning Dial to the desired AM or FM station. Playing a CD Step 1: Open the CD door, and place a CD or CD-R/RW into the player. Step 2: Adjust the Power Switch to CD mode. Step 3: Press the Play/Pause Button to begin playing the loaded CD. Programming a CD Step 1: Open the CD door, and place a CD or CD-R/RW into the player.
AUX IN Operation Setting up (AUX IN) connection AUX-IN jack will allow you to connect external music player or external sound source to the main unit. 1. Plug into a 3.5mm audio cable (not included) into your external music player and connect the other end (3.5mm jack) into the AUX IN jack on the top of the unit. 2. Make sure your external music player is turned on and start music playback on the music player 3. Adjust VOLUME knob to control the sound level of music playback from the speakers on the unit.