MODEL NO.
Warnings and Precautions TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. This symbol, located on back or bottom of the unit, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Important Safety Instructions 1. Read Instructions - All the safety and operating instruction should be read before the product is operated. 2. Retain Instructions - The safety and operating instruction should be retained for future reference. 3. Heed Warnings - All warning on the product and in the operating instructions should be adhered to. 4. Follow instructions - All operating and use instructions should be followed. 5. Cleaning - Unplug this product from the wall outlet before cleaning.
LOCATION OF CONTROLS 17 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 18 19 1. Mounting Peg (x4) 11. Stop 2. Random/Memory Preset up button 12. Skip/Tune Backward 3. Source button 13. Volume – button 4. Power button 14. Open/Close CD tray 5. Timer button 15. Volume + button 6. Repeat/Memory Preset down button 16. Skip/Tune Forward 7. Program/Clock set/Memory button 17. CD tray 8. Display Mode button 18. Aux In 9. Display 19. DC In 10.
POWER SOURCE A. AC Power To power the unit, plug the built-in AC Power cord into a standard wall outlet. AA Slide Out Y ER TT BA 5 M 202 HIU CR 3V LIT C. Remote Control Requires one CR2025 button cell battery (included) All of the above controls are duplicated on the unit’s remote control. The procedure for replacing the remote’s CR2025 battery is also detailed on the back of the remote. AA B. Battery Backup Requires 2, AA-size, batteries (not included).
CLOCK AND TIMER Setting the Clock 1. With the power off, press and hold the Clk set/Mem button. The hour on the display will begin flashing. 2. Press the Tune +/- buttons to adjust the hour. 3. Press the Clk set button again to adjust the minutes. The minutes on the display will begin flashing. 4. Press the Tune +/- buttons to adjust the minutes. 5. Press the Clk set button to finish setting the time, or wait for the display to stop flashing. Setting the Timer 1. With the power off, press the Timer button.
RADIO Radio Reception An FM antenna is built into the unit. To improve FM radio reception, adjust the position of the unit. Tuning the FM Radio 1. Press the Power button to turn the under cabinet music system on. 2. Press the Source button to switch to FM Radio Mode. 3. Press the Tune +/- button to tune the radio manually. 4. Hold down the Tune +/- button to scan for available stations. Saving and Playing a Station as a Preset 1. Tune to the desired station. 2. Press the Clk set/Mem button.
Playing Audio through Bluetooth 1. After successfully pairing to a device, use the native controls on the connected Bluetooth Device to select a track. 2. To play or pause the selected track, use the native controls on the connected Bluetooth Device, or the Play/Pause button on the unit. 3. To skip forward or back on the selected track, use the native controls on the connected Bluetooth Device, or the Skip/Tune +/- buttons on the unit. 4.
LIMITED PRODUCT WARRANTY This quality product is warranted to be free from manufacturer’s defects in material and workman-ship, provided that the unit is used under the normal operating conditions intended by the manufacturer. Should you have any problem with this product, please and it is highly recommended to visit our website at www.curtisint.