Specifications

Remote
In the Box
Device Instruction
Installation
Placement
Pairing
Low Battery
Mapping Keys
Factory Reset
Specification
Return and Refund Policy
Contact and Support
1. Before using, please install the SwitchBot
App and sign up/sign in your SwitchBot
account. Then open the Battery Box.
2. Remove the plastic battery isolation tab,
and you should see the light flashes once.
3. Put back the Battery Box and turn on
the Bluetooth on your phone. Tap Add
Device in the left side menu and choose
Remote. Follow the App instruction and
add your device.
Long press both keys together for 15
seconds until the light stop flashing.
You should see the light lights up for
1.5s after releasing the button.
Caution: You may lose all the settings
after Factory Reset and you may need to
add the device and pair again.
When you see a red battery icon on the
App Home Page next to the Remote, you
need to change the battery.
You can set the keys on the Remote to
map one action. One key on the Remote
Button can trigger one action of your
target device.
For example, the Convex Key can trigger
the Curtain to close OR open. And Concave
Key can trigger the Bot to press once.
Setup and Troubleshooting:
support.switch-bot.com
Support Email:
[e-mail]
Feedback:
Please send feedback via the SwitchBot
App in the left side menu with the details
of the issue.
You can pair a Remote to control your
target device like a Bot or a Curtain.
Please place your phone, Remote and
the target device close to each other
before pairing. The rule of thumb for the
distance would be within your eye sight.
Tap the Remote icon on the App Home
Page, and select setup/edit. The Remote
will star
t scanning the target devices
around. Follow the App instruction and
map the keys to actions.
After you add the Remote, you may
place it anywhere
Option 1: Place it on your table.
Option 2: Use the Add-on Hook & Loop to
place it on a vertical surface.
SwitchBot Curtain has one-year warranty
(start from the purchasing day).
The situations below do not fit the
Return and Refund Policy
Intended damage or abuse.
Inappropriate storage (drop down or
soaking in water).
User modify or repair.
Using loss.
Force majeure damage (Natural disasters).
The batteries are not in the warranty.
Model Number: W0301700
Color: White
Material: ABS plastic with UV-Resistant
coating
Product Size: 37.1mm x 43.1mm x 13.4mm
Product Net Weight (with battery): 17.7 g
Power: CR2450
Connectivity: Bluetooth 5.0 Long Range
Remote
remote manual
Add-on
Hook & Loop
Convex Key
Concave Key
Strap-holeBattery Box
CR2450
Button Battery
(In the Remote)
3V
+
Option 3: Use a strap-hole and add a
lanyard for portable uses. You need to
purchase a lanyard separately.
Light
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.Any Changes or modifications
not expressly approved by the party responsible for
compliance could void the user's authority to operate the
equipment. This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
FCC Warning
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for
help.The device has been evaluated to meet general RF
exposure requirement. The device can be used in portable
exposure condition without restriction.
CE Warning
Manufacturer's Name: Woan Technology (Shenzhen) Co.,
Ltd.
This product is a fixed locatio
n. To comply with RF
exposure requirements, a minimum separation distance
of 5cm must be maintained between the user’s body
and the device, including the antenna. Use only the
supplied or an approved antenna.
This device in compliance with the essential requirements
and other relevant provisions of Directive 2014/53/EU. All
essential radio test suites have been carried out.
1. CAUTION : RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED
BATTERIES ACCORDING TO THE INSTRUCTIONS
2. The device complies with RF specifications when the
de
vice used at 5cm from your body