Model: S-1221F 21.5" Broadcast Studio LCD Monitor User Manual Please read this User Manual throughout before using.
Preface Congratulations on your purchase of this product. Please read this user manual carefully. 1 . All internal technologies of this product are protected, including device, software and trademark. Reproduction in whole or in part without written permission is prohibited. 2 . All brands and trademarks of SWIT Electronics Co., Ltd. are protected and other relative trademarks in this user manual are the property of their respective owners.
Maintenance The Monitor 1. Please keep the signal terminals and the cooling vent away from knife-edge, metal or liquid in order to avoid short-circuit and damage. 2. Please don't try to disassemble any parts of the monitor by yourself, which would probably damage the monitor and do harm to human body, and it will cause the invalidation of product warranty. 3. Please don't touch the screen with your fingers, which would probably deface the screen. 4.
1. Features ◆ Full-HD 21.5” LCD Panel 1920×1080 resolution, 1000:1 contrast ◆ Multiple inputs HD/SD-SDI, HDMI and Composite input ◆ Loop through outputs Each of the 2 input HD/SD-SDI and HDMI has loop through output. ◆ SDI 1080psf supported Support SMPTE-RP211 format: 1080psf (30 / 29.97 / 25 / 24 / 23.
2. Panel Instruction Front view ⑴ Speaker: For SDI and HDMI embedded audio monitoring. (Will not work if earphone is plugged in) ⑵ SDI1: Press “SDI1” to select SDI input 1 ⑶ SDI2: Press “SDI2” to select SDI input 2 ⑷ HDMI: Press “HDMI” to select HDMI input ⑸ CVBS: Press “CVBS” to select CVBS input ⑹, ⑺, ⑻ F1, F2, F3: User definable function keys ⑼ WFM: Display waveform Press “WFM” once, it will display the waveform on the screen. Within 5 seconds, press “WFM” again, it will display the waveform menu.
Rear view ⑴ Battery mount: Gold mount / V-lock mount option S-1221FA: Gold mount; S-1221FS: V-lock mount ⑵ VESA Mount: Standard 10×10cm VESA bracket installation ⑶ SDI OUT: HDMI converted to SDI output (BNC connector) ⑷ SDI-LOOP1: HD/SD-SDI loop through output from SDI-IN1 (BNC connector) ⑸ SDI-LOOP2: HD/SD-SDI loop through output from SDI-IN2 (BNC connector) ⑹ HDMI-IN: HDMI input ⑺ DC IN 11V~17V: Connect with DC11V~17V 4-pin XLR power adapter.
3. Menu Operation ⑴ Press “MENU” and it will display menu system ⑵ Revolve “ENTER” to select an item. The selected item will be highlighted display. ⑶ Press “ENTER” to enter the selected item. ⑷ Under menu system, press “MENU” to back to previous menu. *The menu will automatically save and quit if it remains idle. 3.
3.4 TITLE submenu Revolve "ENTER" button to select the letters, and press "ENTER" to input. Select SPACE to input space and DEL to delete the left letter. Max 10 letters are supported. After setting, press "MENU", the system will save data to current user and quit menu. The menu will automatically save and quit if it remains idle. 3.5 DISPLAY submenu The DISPLAY submenu is to select the items to be displayed on screen when ‘DISPLAY” button is pressed.
3.7 COLOR submenu The color submenu is to change the color temperature settings. User can select color temperature as 6500K 5600K 9300K, or define color temperature by RGB GAIN and RGB BIAS.
5. Specifications LCD Performance Size Display area Resolution Aspect ratio Brightness Contrast Color Viewing angle Video Format CVBS SMPTE-274M SDI SMPTE-RP211 SMPTE-296M SMPTE-125M ITU-R BT.656 HDMI General Working voltage Power consumption Working temperature Working humidity Storage temperature Storage humidity Dimensions Net weight (w/o stand) Net weight (with stand) 21.5 inches 477 268mm 1920 RGB 1080 16:9 (4:3 adjustable) 250cd m2 1000:1 16.