Data Sheet

This device distributes the signals of a USB port to several ports
and ensures additionally an active power supply. Any other use
or use under other operating conditions is considered to be
improper and may result in personal injury or property damage.
No liability will be assumed for damages resulting from impro-
per use.
Ensure that plastic bags, packaging, etc. are properly disposed
of and are not in the reach of babies and young children.
Choking hazard! Ensure that children do not detach any small
parts from the product. They could swallow the pieces and
choke! Never let children play unattended with the electrical
devices.
Within the device there are areas where high voltages may be
present. Never remove any covers. There are no user serviceable
parts inside the unit. Disconnect the power plug from the mains
socket before connecting and disconnecting loads as well as
prior to maintenance to turn the unit volt-free. Do not use the
device when covers or safety equipment are missing or dama-
ged.
Risk of overheating! Do not cover the device. Do not
install the device near any direct heat source.
For the packaging, environmentally friendly materi-
als have been chosen that can be supplied to normal
recycling. Ensure that plastic bags, packaging, etc.
are properly disposed of. Do not just dispose these
materials with your normal household waste, but
make sure that they are fed to a recovery. Please
follow the notes and markings on the packaging.
This product is subject to the European Waste
Electrical and Electronic Equipment Directive (WEEE)
in its currently valid version. Do not dispose with
your normal household waste. Dispose this device
through an approved waste disposal rm or through
your local waste facility. When discarding the unit,
comply with the rules and regulations that apply in
your country. If in doubt, consult your local waste
disposal facility.
 USB 3.0 Hub with charging station
with mains switch
 1 × USB 3.0 type B and 16 × USB 3.0 type A
with status LED on the front side
 1 × USB 2.0 type A on the rear side
Technical specications
 Output power:
16 × 5 V / 2.4 A, 192 W in total
 Voltage supply:
230 V ~ 50 Hz
 Fuse:
5 mm × 20 mm, 10 A, 250 V, fast blow
 Power consumption: 200 W (max.)
 Environmental conditions:
Temperature range: 0° C…40° C
Relative humidity: 20 %…80 % (non-condensing)
 16 status LEDs
 Dimensions (W × H × D):
482.6 mm × 44.6 mm × 220 mm, 1 rack unit
 Weight: 3.52 kg
Thomann GmbH · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de
DocID: 438902_07.10.2021
USB Hub 1916
EN