Freestanding Vanity ® INSTALLATION INSTRUCTIONS @SwissMadison #WellMadeForever www.swissmadison.com | 1-434-623-4766 | info@swissmadison.
FREESTANDING VANITY INSTALLATION INSTRUCTIONS PRIOR TO INSTALLATION: · Inspect product to ensure no damages have occurred while in shipping. · Observe all plumbing and building codes in accordance with your state and local requirements. · Floor must be level prior to installation of vanity. · All dimensions are nominal! Be sure to measure your vanity prior to installation. · The step-by-step guidelines in the installation instructions are a general reference.
FREESTANDING VANITY Parts for Reference: 1. Left side panel 2. Right side panel 3. Bottom panel 4. Rear top bar 5. Rear bottom bar 6. Left door 7. Middle door 8. Right door 9. Left middle panel 10. Right middle panel 11. Front cross bar 12. Drawer left side panel 13. Drawer right side panel 14. Drawer back panel 15. Drawer front panel 16. Drawer bottom panel A. Cam bolt B. Cam lock C. Wooden dowel D. Metal bracket E. Hinge F. Screw (10mm) & plastic anchor G. Screw (14mm) H. Screw for handle (22mm) I.
FREESTANDING VANITY INSTALLATION INSTRUCTIONS 2. Connect Bottom Panels · Insert 2 wooden dowels (C) into the front cross bar (11). · Screw 2 cam bolts (A) into the rear top bar (4). Repeat for the rear bottom bar (5). · Insert 8 cam bolts (A) and 4 wooden dowels (C) into the bottom panel (3). · Connect the left middle panel (9) and the right middle panel (10) to the rear top bar (4) and the rear bottom bar (5). · Secure in place by locking 4 cam locks (B) as shown.
FREESTANDING VANITY INSTALLATION INSTRUCTIONS 4. Attach Legs · Invert the cabinet and assemble the legs to the bottom panel with necessary screws (M). M M M M M M 5. Assemble Drawer Base · Screw 6 cam bolts (A) into pre-threaded holes on the drawer left panel (12). Repeat for the drawer right panel (13). · Screw 2 cam bolts (A) to the drawer back panel (14). Repeat for the drawer front panel (15). · Use 16 cam locks (B) to assemble the drawer base as shown.
FREESTANDING VANITY INSTALLATION INSTRUCTIONS 7. Attach Doors · Install 2 hinges (E) to both the left door (6) and the right door (8) using 2 screws (G) per hinge. · Use an additional 2 screws per hinge to attach the left door (6) and right door (8) to the cabinet. If the door does not align properly, adjust the hinges according to the diagrams below. Once adjustments have been completed, secure the hinges using 2 screws (G) each.
FREESTANDING VANITY INSTALLATION INSTRUCTIONS 8. Attach Handles · Install the 3 handles (L) to the 3 doors by screwing 6 screws (H) to the doors (6, 7 & 8). L H H L 2 L 8 7 6 9. Secure Vanity to Wall · Attach the 2 metal brackets (D) to the cabinet body using 16 screws (G) as shown. · Mark desired mounting location on wall and ensure placement is level. · Select installation option from below.
FREESTANDING VANITY INSTALLATION INSTRUCTIONS 10. Vanity Top Installation · Install faucet and drain according to manufacturer’s installation instructions. Do not overtighten, this may cause the sink to crack. · Set the vanity top on top of the vanity base, checking the location of the p-trap and drain. · Remove vanity top from vanity base. Apply a thin bead of silicone around the vanity base and set the vanity top carefully in place. · Remove excess silicone with a wet cloth. Wait 24 hours before use.
® well made forever ONE YEAR LIMITED WARRANTY 1-434-MADISON (623-4766) www.swissmadison.com Swiss Madison® products are made with quality materials and excellent craftsmanship to provide our customers with beautiful, durable, long-lasting products.
