User's Manual

ManualsBrandsSwarovski ManualsOpticsATS-80 20-60x80mm HD Spotting Scope with Eyepiece

ATS/STS / DE

ATS/STS / ENATS/STS / EN

1 Protective cap for objective

lens

2 Sunshield

3 Tripod ring

4 Tripod base

5 Connection thread for tripod

6 Locking screw

7 Adjustment ring for focusing

8 Locking mechanism

9 Aiming aid

10 Cover of aiming aid

connection

11 Protective cover for bayonet

12 Eyepiece

13 Adjustment ring for changing

magnification

14 Protective cap for eyepiece

15 Protective cap for bayonet

SWAROVSKI

DESCRIPTION

OPERATION

2.1 REMOVE THE PROTECTIVE CAP FROM THE LENS

To remove the cap, press together the protruding snap ele-

ments at the rim of the cap.

2.2 REMOVE THE PROTECTIVE COVER FOR THE BAYONET FROM THE BAYONET LOCK

To remove the cover, slide the locking mechanism of the

eyepiece downward and turn the protective cover to the left

(anti-clockwise).

Summary of content (6 pages)

PAGE 1
. DESCRIPTION 1 6 2 3 11 7 SWAROVSKI 5 9 10 14 12 SKI OV SWAR 13 18 8 4 SWAROVSKI 15 ATS/STS / EN DE 1 Protective cap for objective lens 2 Sunshield 3 Tripod ring 4 Tripod base 5 Connection thread for tripod 6 Locking screw 7 Adjustment ring for focusing 8 Locking mechanism 9 Aiming aid 10 Cover of aiming aid connection 11 Protective cover for bayonet 12 Eyepiece 13 Adjustment ring for changing magnification 14 Protective cap for eyepiece 15 Protective cap for bayonet 2. OPERATION 2.
PAGE 2
.3 MOUNTING TO TRIPOD SWAROVSKI OPTIK tripod The tripod base fits directly into the SWAROVSKI OPTIK tripod head. 1/4 Other tripods The tripod base has a connecting thread of 3/8˝ UNC. The inserted bush reduces the connecting thread to 1/4˝. The spotting scope thus fits on any standard tripod. If you do not need the mounted aiming aid, please pull it out and insert the cover supplied. 2.5 ATTACHMENT AND DETACHMENT OF THE EYEPIECE 2.
PAGE 3
• Align the marking on the eyepiece with the marking on the bayonet fitting. Use with eyeglasses: Turn the eye cup (clockwise) until it stops. • Insert the eyepiece and turn it to the right (clockwise) until the locking mechanism of the body clicks into the eyepiece. • To remove the eyepiece, press the locking mechanism of the body downward and turn the eyepiece to the left (anticlockwise) until it can be removed. 2 1 2.
PAGE 4
Useful tip: Use the focusing wheel of the spotting scope for accurate focusing. This reduces eye strain. • Turn the locking screw to the right (clockwise) to lock the tripod ring in position. 2.8 USE OF THE ZOOM EYEPIECE To change magnification: Turning the adjustment ring to the right (clockwise) decreases magnification. Turning it to the left increases the magnification. You will be able to read the magnification above the index point. 2.10 USING THE SUNSHIELD 2.
PAGE 5
2.11 DISASSEMBLY OF THE PROTECTIVE CAP FOR THE EYEPIECE The protective cap for the eyepiece is attached to the eyepiece with a cord. By loosening the screw on the eyepiece with a screwdriver, you can remove the cord with the cap from the eyepiece. Please reinsert the screw. 2.12 AFTER USING THE OBSERVATION SPOTTING SCOPE • Please put the protective cap for the objective lens back on.
PAGE 6
The housing is best cleansed with a soft, moist cloth (don’t use the lens-cleaning cloth). In the event of hard-to-remove dirt (e.g. sand) the eye cups can be unscrewed and cleaned easily. 4. FOR YOUR SAFETY 4.1 WARNING! Never look at the sun with the spotting scope! This leads to injury of your eyes! 3.3 STORAGE You should keep your spotting scope in a well-ventilated and dark place. A wet spotting scope should to be dried before storage.