Security Made Smarter Thermal-Sensing Security Cameras High-Accuracy Motion Activated 1080p HD Cameras EN INSTRUCTION MANUAL
1 Introduction Congratulations on your purchase of these thermal-sensing security cameras. • Seeing is believing from these 1080p full HD cameras (2.
2 Connecting the Cameras Video & Power Cable Video Input Twist to lock video connectors Power Splitter connects here Power Output 1 Connect this to the DVR Video Output Power Input 2 3 Video & Power Cable connects here Power Adapter Connect to a spare wall socket Power Adapter connects here Power Splitter AUDIO INPUT 1 3 5 LAN 7 + AUDIO OUTPUT 2 4 VIDEO INPUT 6 Digital Video Recorder 8 VGA RS485 12V 1.
3 Mounting the Cameras The camera can be mounted onto a flat surface using screws. The surface must have sufficient strength to hold the camera. • Position the camera in the location you want to mount it, and mark the screw holes on the surface to position the screws. Then, using appropriate screws for the surface you’re fixing the camera to, secure the camera in place. • If you’re mounting to a wooden surface, then screw the camera directly to the surface.
4 Camera Location Tips Some things to consider when choosing a location: 1. What you want to monitor and where you’ll get the best view of it. 2. How you’re going to connect the cameras to your monitoring system; remember that cables and connections should be kept out of the weather. 3. How to keep the cameras out of harm’s way. It’s recommended to mount your cameras at an elevated position. 4. Place your cameras as close to the area of interest as practicable.
5 Limited Warranty - Terms & Conditions Swann Communications warrants this product against defects in workmanship and material for a period of one (1) year from its original purchase date. You must present your receipt as proof of purchase for warranty validation. Any unit which proves defective during the stated period will be repaired without charge for parts or labour or replaced at the sole discretion of Swann.
6 FCC Verification This equipment has been tested and found to comply with the limits for Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Helpdesk & Technical Support Technical Support E-mail: tech@swann.com Technical Support Website: support.swann.
