CAMERA OVERVIEW Remember to remove the protective film from: the grant of the camera before use. Infrared LED (for night vision) Microphone Night detection \ Sensor Passive infrared motion sensor Theme Connector (optional wired connection 10 your router; camera must be paired via WI-Fi first)
EES Ey Dem Connect the camera to the power adapter using the power & Ethernet cable, then plug the power adapter to a power outlet, as shown below. Make sure the camera is within range of the WI-Fi network to which you want to connect.
GET THE SWAN SECURITY APP 1 Download the latest version of the Swan Security app from the Apple App Store® or Google Play™ Store on your i0S or Android device. Simply search for "Swan Security”. 2 Open the app and create your Swan Security account. You will need to activate your account by confirming the email sent to the registered email account before you can sign in.
SET UP THE CAMERA Launch the Swan Security app and sign in. Tap the Pair Device button on the screen [or open Menu and select Pair Device) and follow the in-app instructions to set up your new camera. Before you begin, be close to your router er access point and have your WI-Fi network information (including password) handy. Please note that the camera can connect to a 2.4GHz WI-Fi network only.
MOUNT THE CAMERA The camera can be mounted on a flat surface using the included screws (and wall plugs). For best performance, make sure the camera location has good, reliable WI-Fi reception available. Using the app, try streaming live video from the camera there. If you don't experience any streaming issues (buffering, etc), you've found a good place for your device. As a general rule, the nearer your camera is to your WI-Fi router, the better the wireless connection quality.
as Motion detection The camera's PIR motion sensor detects heat signatures of moving objects. You'll generally get good detection results by pointing the camera downwards at an angle where people will be moving across the coverage area before heading directly towards the camera. LED indicator guide The LED light on the front of your camera helps inform you of what is happening with the device.
= [ol [Ns EWN A TETA Conecte la cámara al adaptador de corriente usando el cable de corriente y E eternice cable, luego enchufe el adaptador de corriente a un toma corriente, como se muestra a continuación. Verifique que la cámara se encuentre dentro del rango de la red Ni-Fi a la que desea conectarla.
neis le Detección de movimiento El sensor de movimiento PIR de la cámara detecta las firmas de calor de los objetos en movimiento. En general, obtendré buenos resultados de detección apuntando la cámara hacia abajo en un angulo donde las personas se muevan por el rea de cobertura antes de dirigirse directamente hacia la cámara. Quia del Indicador LED La luz LED en el frente de su cámara ayuda a informarle lo que sucede con el dispositivo.
PRÉSENTATION GÉNÉRALE DE LA CAMERA N'oubliez pas de retirer le film protecteur de avant de {appareil avant de Utiliser. LED infrarouges utg [pour La vision réinitialisation nocturne) i Câble Micraphure 11 d'alimentation Capteur de...
ALIMENTATION DE LA CAMERA Connectez la caméra a L'adaptateur secteur a l'aide du cible d'alimentation et Ethernet, puis branchez l'adaptateur secteur sur une prise secteur, comme indiqué ci-dessous. Assurez-vous gue la caméra est a portée du réseau Wi-Fi auquel vous souhaitez vous connecter.
OBTENTION DE L APPLICATION BOTSWANA SECOURISTE 1 Téléchargez la dernière version de Botswana Secouriste Tr depuis ['Apple App Store® ou le Google Play™ Store sur votre appareil iOS ou Android. IL suffit de rechercher "Botswana Secouriste. 2 Ouvrez l'application et créez votre compte Botswana Secouriste. Vous devrez activer votre compte en confirmant 'e-mail envoyé au compte de messagerie enregistré avant de pouvoir vous connecter. Boi Bienvenue chez Botswana Connexion op Pour commander.
CONFIGURATION DE LA CAMERA Lancez l'application Botswana Secouriste et connectez-vous. Appuyez sur le bouton Associer appareil 4 l'écran [ou ouvrez le Men t sélectionnez Associer appareil) et suivez les instructions fournies avec application pour configurer votre nouvelle caméra. Avant de commencer, approchez-vous de votre routeur ou de votre point d’accès et notez les informations de votre réseau Wi-Fi ly compris votre mot de passe].
INSTALLATION DE LA CAMERA Installez la caméra dans un endroit offrant une réception Wi-Fi fiable et fiable pour garantir les meilleures performances de streaming vidéo. A L'aide de l'application, essayez de diffuser en continu des vidéos en direct & partir de la caméra. Si vous ne rencontrez aucun problème de streaming [mise en mémoire tampon, etc.], vous avez trouvé un emplacement approprié pour votre appareil.
ASTUCES Détection de mouvement Le capteur de mouvement PIR de la caméra détecte la chaleur des objets en mouvement. En général, vous obtiendrez de bons résultats en termes de détection en dirigeant la caméra vers le bas, la pointant sur un angle oll les personnes se déplacent dans sa zone de couverture avant de se diriger directement vers la caméra. Guide de l'indicateur LED La lumière LED située a L'avant de votre caméra vous informe de ce qui se passe avec l'appareil.
PANORAMICA DELLA TELECAMERA Ricordarsi di rimuovere (a sbellicata protettiva dal Lato anteriore della telecamera prima deluso: LED a infrarossi [per visione nottua) “1p Microfono -4 Connettore di alimentazioni Sensore di rilevamento del notturno Sensore di rilevamento del movimento : i 2 aggi infrarossi passivo Connettore Internet Altoparlante (connessione cablata (inferiore) opzionale al utero; La telecamera deve essere prima abbinata tramite I-Fi)
ALIMENTARE LA TEL CAMERA Collegare la telecamera all'alimentatore utilizzando il cavo di alimentazione e Internet in dotazione, quindi collegare l'alimentatore a una presa di corrente, come indicato. Verificate che la telecamera sia nel raggio della rete I-Fi al quale desiderate collegarvi.
CONFIGURAZIONE DELLE TELECAMERA Aprire app Sanno Esecutori e eseguite accesso. Toccate il tasto Abbina dispositivo sullo schermo [0 aprire Menu 2 e selezionare Abbina dispositive) e seguire le istruzioni del app per configurare la nuova telecamera. Prima di iniziare avvicinarsi al utero o punto di accesso e tenere a portata di mano le informazioni della rete I-Fi (inclusa la password). La telecamera pus collegarsi solo ad una rete I-Fi 2.4GHz.
MONTAGGIO DELLA TELECAMERA Montare la tele carnera in un luogo con una ricezione I-Fi buona e affidabile per garantire la migliore prestazione streaming video. Usando l'ape, provare a mostrare video dal vivo dalla telecamera. Laddove non si presentassero problemi di streaming (buffe ring, ecc.), quello & il luogo perfetto per il dispositivo. Di norma, quanto pili vicina & la telecamera al I-Fi utero, tanto migliore sarà la qualità di connessione.
SUGGERIMENTI Rilevamento di movimento IL sensore di movimento PIR della telecamera rileva le tracce termiche degli oggetti in movimento. In genere si otterranno buoni risultati di rilevamento puntando la telecamera verso il basso in un angolo in cui le persone si muovono attraverso l'area di copertura prima di dirigersi direttamente verso la telecamera. Guida dell'indicatore LED La luce LED sul late anteriore della telecamera informa su cosa accade con il dispositive.
KAMERAOBERSICHT Entfernen Sie bitte vor Gebrauch die Schutzfolie auf der Vorderseite der Kamera, Infrarot-LEDs (far Nachtsicht] “7'y Mikrofon = Passiv-infrarot i Bewegungssensor d i Steckeranschluss (optionale Lautsprecher Kabelverbindung zum Router, (unten) Kamera muss zuerst ober WLAN gekoppelt werden)
KAMERA MIT STROM VERSORGEN Verbinden Sie die Kamera mit dem Strom und Ethernetadapter mit dem Stromadapter und stecken dann den Stromadapter in eine Steckdose, wie nachstehend gezeigt. Achten Sie darauf, dass sich die Kamera im Empfangsbereich des WLAN befindet, mit dem Sie sie verbinden wollen. Netzadapter Router-LAN-Anschluss [optional] Strafmund Thematik.
TIPPS Bewegungserkennung Der PIR-Bewegungsmelder der Kamera erkennt Hitzesignaturen beweglicher Objekte. Sie erhalten im Allgemeinen gute Erkennungsergebnisse, wenn Sie die Kamera in einem Winkel nach unten einstellen, wo Leute durch den Deckungsbereich gehen, bevor sie direkt auf die Kamera zugehen. LED-Anzeigenleitfaden Die LED-Anzeige vorn an der Kamera informiert Sie User den Zustand des Grats.