Content 1 General Information..................................................................................................................................................... 3 1.1 Profile ............................................................................................................................................................................... 3 1.2 Safety Information ......................................................................................................................
3.7 Using the Headset ........................................................................................................................................................... 18 4 Input method ............................................................................................................................................................... 18 4.1 Key for Input Methods ..............................................................................................................................
5.10 Application ................................................................................................................................................................... 28 5.11 My files......................................................................................................................................................................... 29 5.12 Games ...................................................................................................................................
Phone Dimensions:12.3*5.3*1.6cm Weight: 56g Lithium battery Rated capacity: 800mAh Continuous standby duration: 6 Days Continuous conversation duration: 8 hours Please refer to their labels for other data related to the battery and the charger. . 1.2 Safety Information If your phone has lost or been stolen, notify the telecommunication office the SIM card is disabled (network support is required). This can avoid economic loss caused by unauthorized use.
· Set PIN code of SIM card · Set phone password 1.3 Safety warning and Attentions Safety warning ¾ ROAD SAFETY COMES FIRST Do not use a hand-held phone while driving. Use hands-free fittings when calls are unavoidable while driving. In some countries, dialing or receiving calls while driving is illegal! ¾ SWITCH OFF IN AIRCRAFT Wireless devices can cause interference in aircraft. Using a mobile phone in flight is illegal and risky. Please make sure that your mobile phone is powered off in flight.
whenever it is forbidden to use it or, when it may cause interference or danger. Properly use your mobile phone near medial apparatuses, such as pacemakers, hearing-aids and some other electronic medical devices, as or may cause interference to such apparatuses. ¾ INTERFERENCE The conversation quality of any mobile phone may be affected by radio interference. An antenna is built inside the mobile phone and located below the microphone.
phone does not necessarily support all the features described in this manual due to network or radio transmission problems. Some network even do not support the emergency call service Precaution This mobile phone is well designed with fine art. Please exercise special care when using it. The following suggestions will help your mobile phone survive the warranty period and extend its service life: ¾ Keep the mobile phone and all its fittings beyond children's reach. ¾ Keep the mobile phone dry.
¾ This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ¾ Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
¾ phone transmitting at its highest certified power level in all tested frequency bands, although ¾ the SAR is determined at the highest certified power level, the actual SAR level of the phone ¾ while operating can be well below the maximum value, in general, the closer you are to a ¾ wireless base station antenna, the lower the power output.
2 2.1 Your phone Phone overview The phone has many powerful function and good appearance. 2.2 Functions of Keys Dial key Press it to originate a call by entering the called number or selecting a contact from the phonebook; or press it to receive an incoming call; or press it in standby state to show the latest call records.if you want to dial a call. End key Press it to end a call being dialed or end an ongoing call; or press it to exit the menu and return to the standby state.
Press number keys 0 through 9 to input or edit state to input numbers and characters; In idle screen, you can press left soft key then press * to lock/unlock keypad. Press two times the key * to input "+" in standby interface. When the symbol "+" appears, Press the * key quickly to input "P" or "W","P" and "W" are used for calling the extension; "+" are used for dialing an international call. 2.3 Technical specifications Phone Dimensions (W×D×H): 12.3*5.3*1.
3 3.1 Getting started Installing the SIM Cards and the Battery A SIM card carries useful information, including your mobile phone number, PIN (Personal Identification Number), PIN2, PUK (PIN Unlocking Key), PUK2 (PIN2 Unlocking Key), IMSI (International Mobile Subscriber Identity), network information, contacts data, and short messages data. Note: After powering off your mobile phone, wait for a few seconds before removing or inserting a SIM card.
SIM cards from being misused. When you are prompted to input any of the codes mentioned below, just input the correct code and then press the OK key. If you input a wrong code, clear it and then input the correct code. Phone lock code The phone lock code may be set to prevent your mobile phone from being misused. In general, this code is provided along with the mobile phone by the manufacturer. The initial phone lock code is set to 1234 by the manufacturer.
The PUK code (Personal Unlocking Key) is required to change a blocked PIN. It is supplied with SIM card. If not, contact your network operator. If you input wrong PUK code for 10 times, SIM card will be invalid. Please contact the network operator to replace the SIM card. Barring code A barring code is required for setting the call barring function. You can obtain this code from the network operator to set the call barring function. 3.
Your mobile phone can monitor and display the battery state. Normally the remaining energy of the battery is indicated by the battery level icon at the upper right corner of the display screen. When the battery energy is insufficient, the mobile phone prompts "Battery low". If you have set an alert tone, an alert tone will be given off when the battery level is too low. A charging animation appears when the battery is being charged. When the charging is complete, the animation disappears.
Using the Battery The performance of a battery is subject to multiple factors: radio network configuration, signal strength, ambient temperature, chosen functions or settings, phone fittings, and the voice, data or other application mode you choose to use. To guarantee the optimal performance of your battery, please stick to the following rules: Use only the battery provided by the vendor. Otherwise, damages or even injuries could be caused during the charging.
the old battery to the mobile phone manufacturer or place it in specified battery reclamation areas. Do not litter any battery with other rubbish. Warning: Short-circuits of the battery may cause explosion, fire, personal injury or other severe consequences! 3.4 Powering On/Off the Mobile Phone Hold the End key for a while to power on the mobile phone. A power-on animation appears on the display screen.
3.6 Dialing Calls In the standby interface, press Dial-pad enter virtual dial pad, press number keys to input the area code and the telephone number, and then press the dial key to dial a call. 3.7 Using the Headset It would enter headset mode automatically when you insert headset to the slot. Make sure of inserting it at the bottom of the slot, or you can’t use it normally. 4 Input method This mobile phone provides English input, smart English input and numeric input method.
4.3 Numeric Input You can input numbers with the numeric input method. Press a number key to input the corresponding number. 4.4 English input and numeric input: The keyboards for English input and numeric input are defined in the following table: Key Character or Function Remarks Number key 1 .
Left soft key Right soft key End key Equivalent to OK or Options Equivalent to Back or Clear Press it to return to the standby interface English input: Each key is used to represent multiple characters. Quickly and continuously press a key till the character you want appears. Input the next character after the cursor moves. Press the # key to switch between input methods To input a blank, switch to the English input mode (in upper or lower case) and then press number key 0.
and in the SIM cards form a phonebook. The phonebook search function enables you to view contacts. You can search a contact as required from the phonebook. Select this option, in the edit interface, input the name of the contact you want to search or the first letter(s) of the name. All the contacts meeting the search condition are listed. Press the Up and Down direction keys to browse the contacts and select contact.
dial, or edit (or send a short message to it). Delete all You can delete all the latest call records. Call timers Choose Call timers to view the last call time, the total time of all dialed calls, the total time of all received calls and the total time of call history or to reset all the time. 5.3 Message If the short message memory is full, a blinking message icon appears on the top of the screen. To normally receive short messages, you need to delete some of the existing short messages.
Outbox The messages which are sent failed are stored in the Outbox. Drafts Draft messages are listed in this menu. Sentbox Sent messages are listed in this menu. Templates You can create pre-defined messages in this interface. Broadcast message This network service enables you to receive a variety of text messages, such as broadcast messages about weather forecast or road conditions. At present, few networks provide this service. Please consult the network operator.
will be saved in the file system of the memory card. 5.5 Audio player You can use this function to play audio files. By pressing the direction key you can control the playing process of audio player: play/pause(OK key), switch to last song/next song (press left or right direction key), fast forward (press and hold right direction key) and rewind (press and hold left direction key). In audio player interface, you can press up and down direction keys to control volume. 5.
select Activate or Deactivate. The mobile phone will prompt you to input the call barring code and then contact the network. A moment later, the network will make a response and send the operation results to the mobile phone. Hide ID: You can select hide ID, display own ID and or display ID by network. Others: You can set call time minute reminder, auto redial and vibration when connected through this function.
Security This function provides you with related settings about safety use PIN: To activate PIN lock, you need to input the correct PIN code. If you set PIN lock to On, you need to input the PIN each time you power on the mobile phone. In the case you input a wrong PIN for three consecutive times; you need to input the PIN Unblocking Key (PUK). The PUK is used to unlock and change the locked PIN. To obtain the PUK, contact the network operator. Modify PIN2: To change PIN2 code of PIN code.
Network selection: Set Network selection mode to Automatic or Manual. Automatic is recommended. When Network selection mode is set to Automatic, the mobile phone will prefer the network where the SIM card is registered. When Network selection mode is set to Manual, you need to select the network operator's network where the SIM card is registered. 5.7 Profiles The mobile phone provides multiple user profiles, so that you can customize some settings to adapt to the specific events and environments.
Sound recorder The phone support WAV and AMR. The AMR takes the compression algorithm. So in the same memory condition, it has longer recording time than WAV. FM radio You can use the application as a traditional FM radio with automatic tuning and saved channels. Before using it, you should insert the earphone as antenna. In FM radio interface, left or right direction key to search channels manually, press OK key to play/pause the playing process of the current channel.
World clock You can view and set your phone time by choose different time zones. Clock You can set three alarms through this function. Bluetooth You can transfer data, such as music to other device using Bluetooth. Search the device and receive/transfer data. The received data is automatically stored in the directory. Torch open You can turn on/off the flashlight by this function. 5.11 My files The phone supports the memory card. The capacity of the memory card is selectable.
6 Appendix Appendix 1:Troubleshooting If you find exceptions when operating the mobile phone, restore the factory settings and then refer to the following table to solve the problem. If the problem persists, contact the distributor or service provider. Fault Cause Solution The SIM card Contact your network service provider is damaged. The SIM card is not in Check the SIM card SIM card error position. The metal face of the Clean the SIM card with a clean cloth SIM card is polluted.
Poor received signal quality Signals are obstructed. For instance, radio waves cannot be effectively transmitted nearby a high building or in a basement.
The mobile phone cannot be powered on The battery energy is exhausted.
The mobile phone is not in a service area of the GSM network The battery cannot be charged The signal is weak The charging voltage does not match the voltage range indicated on the charger An improper charger is used Poor contact Move to the network operator's service area Move to a place where the signal quality is high Ensure the charging voltage matches the voltage range indicated on the charger Use the charger specially designed for the mobile phone Ensure the charger plug is in good contact with