DIGITAL WIRELESS BACKUP CAMERA SYSTEMS User Manual / Installation Instructions VEHICLE SAFETY SOLUTIONS Before installation please read the manual
What’s in the Box? 01 02 03 04 05 06 07 08 09 10 11 NOTE: The contents included may be different based on the kit you purchased. Please take the actual product as standard. 01. 7inch IPS Monitor 05. Car Charger 09. Antenna 02. Camera 06. Sunshade 10. Accessories 03. U-shaped bracket 07. User Manual 11. Installation tool 04. Butterfly bracket 08.
Introduction Please read all of the installation instructions carefully before installing the product. Improper installation will void manufacturer’s warranty. Thank you very much for purchasing a Rear View Backup Camera System. With this manual you will be able to properly install and operate the unit. The Backup Camera System is intended to be installed as a supplement aid to your standard rear view mirror that already exists in your vehicle.
Monitor Operation Button Function Use this button to turn the monitor On and Off 1) Brightness "-" 2) Enter the menu select left 3) "-" 1) Brightness "+" 2) Enter the menu select right 3) "+" Switch channel 1) Menu 2) Return to previous level 1) Confirm key 2) Car ruler 3) Long press "SEL" to call up V/H/W
On the back of the monitor, you can insert an TF card Open the SD card slot on the monitor back with a screwdriver,insert SD card It is recommended to use high-speed TF card of class 10 or above.
Installation Diagram Monitor Installation Choose a monitor location in your vehicle that does not block your view and complies with local laws for safe driving. Do not place in an area where it might interfere with driving.
Connection method Car charger connect to wireless receiver in the monitor 1 “+”ACC/Fuse/radio “+” Taillight “-” “-” Ground 2 Note: Of connecting power directly to battery, the cameras always ON and therefore candrain battery. Therefore it is recommended to connect power to an ignition switched accessory power source.
Pairing the Camera and Monitor NO SIGNAL 1. Select the channel to be pairing 2. Enter the menu and select pairing խ 3. Start pairing 4. Waiting for matching and drawing successfully NOTE: when you need pairing,please confirm the circuit is properly connected and powered.If you need to pairing multiple cameras, please switch to the corresponding channel.
Specifications Power Supply DC12 to 36V Wireless Frequency 2.4 GHz 2.
Troubleshooting Problem Monitor Won’t turn on Solution Check the cigarette lighter has 12-36V DC Output Check the fuse in the Cigarette socket adapter Camera and Monitor won’t pair Check if the camera is receiving power Make sure to follow the instructions to operate the Pairing Check if the camera and monitor antennas are installed Distance between camera and monitor is too great. Reduce distance between camera and monitor Weak Signal Large dense objects could be obscuring the signal.
& tĂƌŶŝŶŐ ^ƚĂƚĞŵĞŶƚ ŚĂŶŐĞƐ Žƌ ŵŽĚŝĨŝĐĂƚŝŽŶƐ ŶŽƚ ĞdžƉƌĞƐƐůLJ ĂƉƉƌŽǀĞĚ ďLJ ƚŚĞ ƉĂƌƚLJ ƌĞƐƉŽŶƐŝďůĞ ĨŽƌ ĐŽŵƉůŝĂŶĐĞ ĐŽƵůĚ ǀŽŝĚ ƚŚĞ ƵƐĞƌ͛Ɛ ĂƵƚŚŽƌŝƚLJ ƚŽ ŽƉĞƌĂƚĞ ƚŚĞ ĞƋƵŝƉŵĞŶƚ͘ dŚŝƐ ĞƋƵŝƉŵĞŶƚ ŚĂƐ ďĞĞŶ ƚĞƐƚĞĚ ĂŶĚ ĨŽƵŶĚ ƚŽ ĐŽŵƉůLJ ǁŝƚŚ ƚŚĞ ůŝŵŝƚƐ ĨŽƌ Ă ůĂƐƐ ĚŝŐŝƚĂů ĚĞǀŝĐĞ͕ ƉƵƌƐƵĂŶƚ ƚŽ WĂƌƚ ϭϱ ŽĨ ƚŚĞ & ZƵůĞƐ͘ dŚĞƐĞ ůŝŵŝƚƐ ĂƌĞ ĚĞƐŝŐŶĞĚ ƚŽ ƉƌŽǀŝĚĞ ƌĞĂƐŽŶĂďůĞ ƉƌŽƚĞĐƚŝŽŶ ĂŐĂŝŶƐƚ ŚĂƌŵĨƵů ŝŶƚĞƌĨĞƌĞŶĐĞ ŝŶ Ă ƌĞƐŝĚĞŶƚŝĂů ŝŶƐƚĂůůĂƚŝŽŶ͘ dŚŝƐ ĞƋƵŝƉŵĞŶƚ ŐĞŶĞƌĂƚĞƐ ƵƐĞƐ ĂŶĚ ĐĂŶ ƌĂĚŝĂƚĞ ƌĂĚŝŽ ĨƌĞƋƵĞŶĐLJ ĞŶĞƌŐLJ ĂŶĚ͕ ŝĨ ŶŽƚ