Manualshelf

Quick Start Guide

ManualsBrandsSVS ManualsAudioPB-1000 Pro Subwoofer
12
4
For connection to a Stereo Receiver or Pream-
plifier without auto-set-up, adjust the PB-1000
Pro volume to match the output of your main
speakers, and adjust the low pass filter to
blend the bass between the PB-1000 Pro and
your speakers. If needed, consult with our
Sound Experts on the best phase setting.
For additional guidance on recommended crossover or low pass filter settings specific to your system,
visit our Subwoofer Matching Tool at www.svsound.com/merlin, or contact our Sound Experts.
For connection to an AV Receiver, set the PB-1000 Pro volume to -10 in the app
(on the rear panel, all but the last two lights illuminated). Set the low pass filter to
LFE and the phase to 0 degrees, then run auto-set-up on the AV Receiver. Always
re-run set-up if you move the subwoofer to
another location.
The rear panel features an intuitive user interface with controls for adjusting the subwoofer’s
primary settings. The blue LED bar shows settings for Volume, Low Pass Frequency, and Phase.
Simply press the setting you want to change and then use the “+” and “-” buttons to adjust the
settings.
Please note, some DSP settings can only be accessed using the SVS app.
The SVS App is the easiest and most convenient
way to access all of the advanced control features
available on your PB-1000 Pro, from the comfort of
your favorite seat.
1
Unbox It
Quick Start Guide
PB-1000 Pro
Get Control
5
Get Calibrated
HOME / VOLUME
MOVIE
PRESET
LOW PASS FILTER
OPTIONS
-22
10050
20 40
200
0
6
4
2
0
-2
-4
-6
-8
-10
-12
PEQ1
ACTIVE
PEQ2
ACTIVE
PEQ3
DISABLED
BOOST: 0 dB
Q FACTOR: 1.2
FREQ: 200
Hz
PARAMETRIC EQ
AUTO EQ - START
MIC INPUT
If you followed the PB-1000 Pro Subwoofer unboxing instructions properly you
will have the following items in front of you. Please confirm all pieces are
available before continuing.
Congratulations on choosing the SVS PB-1000 Pro, one of the most powerful and advanced
subwoofers in the world. We know you’re anxious to get it cranking so the following steps will
guide you through the quick and easy installation process.
We strongly recommend reading the PB-1000 Pro Owner’s Manual to get the best possible
performance out of your new subwoofer. You’ll find useful information about subwoofer
placement, connections, DSP functions and more. The full SVS PB-1000 Pro Owner’s Manual can
be found here: www.svsound.com/pb-1000-pro-manual
Your SVS PB-1000 Pro Subwoofer can be controlled from the SVS Mobile App or
via the rear panel for maximum flexibility when optimizing performance based
on your room layout, speakers, system set-up and more.
Download The App
On The Subwoofer
For iOS, Android, & Amazon Devices
[PB-1000 Pro Subwoofer] [Removable Grille]
[Detachable Power Cord]
+
VOL
LOW
PASS
LOW PASS
PHASE
PHASE
0°
90° 180°
30Hz 40Hz 60Hz 90Hz 140Hz LFE
_
AUTO / ON
UP (+)
LOW PASS FREQUENCY
PHASE
VOLUME
DOWN (-)
REG
ISTER
REG
ISTER
Register Your
New SVS Product:
Thank you for choosing SVS! Registering your SVS product expedites any Sound Experts
support requests, confirms your warranty registration and provides a proof of purchase.
Plus, as a registered customer, you’ll be the first to get SVS news and updates.
Register your product now at: www.svsound.com/register

Summary of content (2 pages)