HDMI KVM Switch Series User manual
4, 8, 16-port USB/PS2 rack-mountable KVM switch user manual Statement US Federal Communications Commission Interference Statement This product has been tested and certified to meet the digital device requirements of Class B of the FCC Rules and provisions in Part 15 of the FCC Rules. These rules are intended to use the device in a commercial environment so as to protect them from harmful interference, and they are the specified provisions that can provide effective protection.
4, 8, 16-port USB/PS2 rack-mountable KVM switch user manual User notes The manufacturer has the right to modify and change the information, documents and specification tables contained in the manual without prior notice. The manufacturer does not guarantee, express, imply or statutorily declare its contents or specifically disclaims its merchantability and applicability for a particular purpose. The same applies to any manufacturer's software that is sold and authorized as described in this manual.
, 8, 16-port USB/PS2 rack-mountable KVM switch user manual Product model introductions: Model AS-9104HA AS-9108HA AS-9116HA AS-9104HLS AS-9108HLS AS-9116HLS Configuration introductions 4 input(USB+HDMI)1 output 8 input(USB+HDMI)1 output 16 input(USB+HDMI)1 output 4 input(USB+HDMI)1 output +LCD 8 input(USB+HDMI)1 output +LCD 16 input(USB+HDMI)1 output +LCD 4
4, 8, 16-port USB/PS2 rack-mountable KVM switch user manual Package contents The multi-computer KVM switch package includes the following: KVM switch host x 1 Power adapter x 1 User manual (CD) x 1 Rackfixed plate x 2 Screw package x 1 Check and make sure that all parts are in place and that they are not damaged in transit. If you encounter problems, please contact your distributors.
4, 8, 16-port USB/PS2 rack-mountable KVM switch user manual Contents About this manual...................................................................................................................................................................... 8 Common symbol introductions ................................................................................................................................................. 9 Chapter Ⅰ ......................................................................
4, 8, 16-port USB/PS2 rack-mountable KVM switch user manual F6 SET ..................................................................................................................................................................... 25 Appendix ................................................................................................................................................................................. 31 Safety instructions ..................................................................
4, 8, 16-port USB/PS2 rack-mountable KVM switch user manual About this manual This user manual will assist you in the effective use of the product functions, including the installation, setting, operation and other procedures of the device.
4, 8, 16-port USB/PS2 rack-mountable KVM switch user manual Common symbol introductions Symbolrepresents the text information that should be entered 【】Parenthesis represents the keys that need to be entered. For example, [Enter] means pressing the Enter key. For keys that need to be entered at the same time, they are put in the same parenthesis, and they are connected by a plus sign. For example: [Ctrl + Alt] 1.The number represents the actual sequence number of operation steps.
4, 8, 16-port USB/PS2 rack-mountable KVM switch user manual Chapter Ⅰ Introduction Product introductions The 8/16-port USB rack-mountable KVM multi-computer switch is a multi-functional device that allows administrators to access an 8/16 HDMI computer from a set of USB keyboards, mice, or a set of PS2 keyboards, mice, and consoles.
4, 8, 16-port USB/PS2 rack-mountable KVM switch user manual The server computer does not need to install any software and drivers, and the server computer directly recognizes KVM. Support OSD to set user login mode and increase the security requirements of KVM login. Support wide-screen resolution. Support DDC communication and adapt to a variety of graphics card devices. Auto Scan function can monitor all computer operations.
4, 8, 16-port USB/PS2 rack-mountable KVM switch user manual Operating system Operating system Windows Linux RedHat SuSE Debian Ubuntu UNIX AIX FreeBSD Sun Solaris Mac Novell Netware Version Windows 2000/XP/2003/2008/Vista/7/10 9.0 or higher 10/11.1 or higher 3.1/4.0 7.04/7.10 4.3 or higher 5.5 or higher 8 or higher From OS 9.0 to10.6 (Snow Leopard) 6.0 or higher For more operating system support, please pay attention to the latest relevant version of product compatibility.
4, 8, 16-port USB/PS2 rack-mountable KVM switch user manual Parts Front view 4-port front panel buttons 8-port front panel buttons 16-port front panel buttons No. 1 2 Parts Port switching selection button Embedded LED indicators 1&2 3 Function description According to the serial number of the switching port, users can gently press the button of the corresponding serial number. In this way, they can switch the corresponding port to the current operation port.
4, 8, 16-port USB/PS2 rack-mountable KVM switch user manual 3 Device reset button port is not selected, and it is not the computer currently operated. It is in the small round hole above the text marked [RESET]. In order to reduce the device restart caused by user's incorrect operation, the product uses the embedded reset button. The user can insert a needle-shaped object into the round hole as needed for 1-3 seconds to complete the reset operation of the KVM device.
4, 8, 16-port USB/PS2 rack-mountable KVM switch user manual Chapter Ⅱ Hardware installation Stacking and installation The KVM switch can be placed on any suitable flat surface and is sufficient to safely support the weight of the device plus additional connection cables. Please make sure the flat surface is clean and free of debris that can affect the ventilation and normal operation of the switch. Rack mounting 1.
4, 8, 16-port USB/PS2 rack-mountable KVM switch user manual 3. Install the KVM switch with the fixed plate on the rack, and match the mounting hole of the fixed plate with the mounting hole on the rack, and lock the fixed plate to the front end of the rack by the rack mounting screws in the mounting package.
4, 8, 16-port USB/PS2 rack-mountable KVM switch user manual Single device installation Note: Please confirm that the device is out of power before installation. In order to prevent device damage during installation, please confirm that all installed devices have good grounding protection. 1. Plug your USB keyboard and mouse into the USB console connection port on the back panel of the switch. 2. Connect the video signal cable of the HDMI monitor to the HDMI console port and turn on the power. 3.
4, 8, 16-port USB/PS2 rack-mountable KVM switch user manual end of the power adapter into the power jack on the switch. 6. Turn on your computer power. Note: Please make sure all plugs are connected to the same set of KVMconnection port jacks (all are on connection port 1, or all are on connection port 2).
4, 8, 16-port USB/PS2 rack-mountable KVM switch user manual Chapter Ⅲ Basic operation Hot pluggable The KVM switch supports hot pluggable function.Itcan remove and plug back components by pulling out the cable connected to the computer's connection port without turning off the switch.
4, 8, 16-port USB/PS2 rack-mountable KVM switch user manual Manual switch selection Please use the buttons on the front operation panel to make a port selection. OSD menu screen selection (Please refer to the relevant chapter of the OSD operation for more information.
4, 8, 16-port USB/PS2 rack-mountable KVM switch user manual the control of the device, all programs must start from the OSD main screen. OSD login The OSD function provides a two-tier (administrator/user) password mechanism. The factory default setting of the product is that there is no need for login password authentication. Therefore, when you open the OSD main menu for the first time, you can enter the main menu screen of the OSD to perform corresponding operations without inputting the login password.
4, 8, 16-port USB/PS2 rack-mountable KVM switch user manual [F1] [F2] [F3] [F4] [F5] [F6] at the bottom of the screen is the function setting of the OSD menu. And the corresponding function operation and setting are performed through the corresponding buttons on the keyboard. After entering the OSD main screen, the port number in the middle of the screen where the light bar stops is the port number of the current selected server computer. You can use the [↑] [↓]on the keyboard to select the port.
4, 8, 16-port USB/PS2 rack-mountable KVM switch user manual 1. To use the name method, move the cursor to the “NAME” option through the keyboard button, and then press the [Enter] key, the input box of “NAME” appears at the bottom of the window. You can enter the name of the port to be switched in the box. Then press [Enter] key again, the KVM switch will directly switch to the corresponding port computer of the name you enter. 2.
4, 8, 16-port USB/PS2 rack-mountable KVM switch user manual Setting ALL QVIEW POWERD ON POWERD ON + QVIEW QVIEW + NAME NAME Function description The main window displays all port information, arranged by port serial number. The main window only displays the quick view port information marked QV. The main window only displays online port device information. The main window only displays the online quick view port information marked QV.
4, 8, 16-port USB/PS2 rack-mountable KVM switch user manual The maximum number of characters that can be input is 15. After the setting is completed, press [ENTER] to confirm, then it will take effect. F6 SET Press the [F6] key to give the administrator the permission to set the OSD menu, set and modify relevant functions, such as port naming, display mode, switching hot key adjustment, etc. To change the settings: 1. Move thelight bar of the selected column to the option and press the [Enter] key. 2.
4, 8, 16-port USB/PS2 rack-mountable KVM switch user manual Setting OSD ACTIVATING HOT KEY SWITCH HOT KEY SCAN DURATION SET PASSWORD SET SUPER PASSWORD CLEAR THE NAME LIST RESTORE DEFAULT VALUE LOCK CONSOLE Function description Theactivating hot key selection of the OSD menu, [CTL] + [CTL] by default Port switching hot key selection Port scan time interval selection Set user password Set super password Clear port name Restore factory default settings Local password login settings OSD ACTIVATING HOTKEY
4, 8, 16-port USB/PS2 rack-mountable KVM switch user manual SWITCH HOTKEY This function can set the shortcut hot key for port switching. The user can directly select the port to be switched, skip the OSD display interface selection, and facilitate the user's quick operation. This function provides 4 hot key combinations: [SCROLL] + [SCROLL] + [NUM], [CTRL] + [CTRL] + [NUM], [ALT] + [ALT] + [NUM], [SHIFT] + [SHIFT] + [NUM].
4, 8, 16-port USB/PS2 rack-mountable KVM switch user manual SET PASSWORD This function can set the function permission of the general user. After the setting is successful, the user can only use this password to clear the operation setting of the port name. SET SUPER PASSWORD This function can set the administrator password. After the setting is successful, some important settings require the administrator password to be set and changed.
4, 8, 16-port USB/PS2 rack-mountable KVM switch user manual CLEAR THE NAME LIST This function can clear the NAME setting of all ports. This function needs to verify the administrator's identity password before it can be implemented. If the password is correct, a prompt will pop up: CLEAR ALL THE NAME? [N]. If you want this operation to take effect, please enter [Y], then enter the keyboard [Enter] to confirm and make it effective.
4, 8, 16-port USB/PS2 rack-mountable KVM switch user manual “RESTORE DEFAULT VALUE ?[N]” at the bottom of the window after the verification is passed . If you want this operation to take effect, please enter [Y], and then enter the keyboard [Enter] to confirm and make it effective. To cancel this operation, you can enter [N], and then enter [Enter] to confirm the cancel operation, or input [Esc] on the keyboard to return directly.
4, 8, 16-port USB/PS2 rack-mountable KVM switch user manual Appendix Safety instructions In general This product is for indoor use only. Please read all the instructions and use them for future reference. Please follow all warnings and instructions on the device. Do not place the device on any uneven surface (such as a cart, shelf, table, etc.). If the device is dropped, it will cause serious damage. Do not use the device in the place near water.
4, 8, 16-port USB/PS2 rack-mountable KVM switch user manual hand it over to the qualified service personnel for repair. The power cords or plugs are damaged or worn. Liquid is spilled into the device. This device is drenched by rain and water. The device has been dropped or the housing has been damaged. The device has significant changes in the function. The device cannot be operated normally after following the operation instructions.
4, 8, 16-port USB/PS2 rack-mountable KVM switch user manual Product specification parameters Type Computer connections Port selection Console Monitor ports Keyboard Mouse Connector Compute Monitor r ports Keyboard, mouse Power Toggle Connection port switch selection KVM reset LED Computer selection port indicator Computer online port Analog mode Keyboard, mouse Maximum video resolution Scan time interval Operating Operating temperature environment Storing temperature Humidity Body Housing attributes Size W
4, 8, 16-port USB/PS2 rack-mountable KVM switch user manual Warranty conditions The maximum compensation undertaken by the company shall not exceed the amount paid by the customer for the product. In addition, the company shall not be responsible for any direct, indirect, special, incidental or consequential damages resulting from the use of this product or the CD, documents, etc. attached to this product.