Sound Station Cooler Operations Manual MATERIAL NO.
Welcome to the instruction manual for the Sound Station Cooler. For FCC application only: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. ·Danger-Risk of fire or explosion. Flammable refrigerant used.
• • • • • • Unplug the unit before cleaning. Wipe down with a damp soft cloth. Be sure to avoid dripping water into or on top of the cooler. For persistent marks isopropyl alcohol may also be used with a soft cloth. Use a dry cloth to dry the appliance after cleaning it. Clean it at regular intervals as required. Slightly open the door wide after cleaning to allow moisture to fully evaporate. Attention: the inner liner of cooler should be cleaned after 6 months use.
Please carefully read the voltage indicator panel before plugging the unit in. Only use the appropriate input for 12v and100-240v power sources: • 12V DC power from a car/ boat (1) should be plugged into the DC socket of cooler (2). • 100-240V AC power from a wall socket (3) should be plugged into the AC socket of fridge (4). electric plug （100-220） DC 12V 7.Technical Data for 100V-240V unit RF power 无线功率：5dbm RF frequency 无线频率：2.4GHZ~2.483.
When rotate Light brightness adjustment button, the LED light brightness can be adjusted. Bass adjustment When rotate Bass adjustment Button to adjust BASS Voice.. Tone adjustment When rotate Tone adjustment Button to adjust TONE Voice.. Turn Off/On Blue Tooth Connection Button When anti-clockwise rotation Sound Adjustment Button to end, if keep rotating the button,Blue tooth connection function will be turn off.
BT Audio Function BT Audio BT signal can be searched by mobile phone after power on. Customers connected to BR2 audio with this signal, and played music using any software about music. The Connection Password is 1234 It supports automatic reconnection.
Light: Adjust the luminance of LED light bar. if adjust the Light button with clockwise rotation, the LED lights will be getting brighter. If adjust the button with anti-clockwise rotation, the LED lights will be getting darker. Bass and Tone： Adjust the Sound effects by these two knobs. For Bass and Tone Adjustment Button, if adjust the button with anti-clockwise rotation, the Bass and Tone will be getting lower.
