TPMS1209T03-CS Hand Tool User Manual S&T TPMS1209T03-CS Hand Tool User Manual Suzhou Sate Auto Electronic Co., Ltd www.sate.com.
TPMS1209T03-CS Hand Tool User Manual Table of Contents S&T TPMS1209T03-CS Hand Tool Components------------------------3 S&T TPMS1209T03-CS Hand Tool Functions----------------------------4 S&T TPMS1209T03-CS Hand Tool Operations---------------------------4 FCC WARNING This device complies with Part 15 of the FCC Rules.
TPMS1209T03-CS Hand Tool User Manual S&T TPMS1209T03-CS Hand Tool Operations 由于普通的卡车 TPMS 产品,中央监控器匹配好后,一旦卡车更换拖车,就要将拖车 的传感器与车头的中央监控器进行重新配对,需要拆卸中央监控器或者传感器,很不方便。 For general TPMS systems for standard trucks, the monitor and transmitter need to be rematched if the trailer is changed from the original tractor, it needs to remove the monitor or transmitters which is inconvenient.
TPMS1209T03-CS Hand Tool User Manual 驶安特 TPMS1209T03-CS 手持工具的操作 S&T TPMS1209T03-CS Hand Tool Operations 1.打开手持工具电源开关,出现欢迎界面: 1. Turn on the switch to enter the welcome interface: Sate Auto Electronic Co. , Ltd Hand Set Tool 2. 此时按任意键进入功能菜单界面,一共有五个功能菜单选项,分两屏显示。第一屏显 示四个菜单,如图所示: 2. Press any key to enter the main menu interface.
TPMS1209T03-CS Hand Tool User Manual 功能菜单说明: Functions: READ INFORMATION TO BOOSTER(阅读中继器信息) CHOOSE BOOSTER ID(中继器 ID 码设置) PRESSURE UNIT SELECT(压力单位设置) ADD SENSOR TO TRAILER(拖车传感器位置设置) SEND INFORMATION TO BOOSTER(发送信息给中继器) 阅读中继器信息 READ INFORMATION TO BOOSTER 1.在功能菜单显示界面下,按方向键 将“>”移动到“READ INFORMATION FORM BOOSTER” 选项, 然后将手持工具靠近智能中继器,按下“Enter 键”就可以读取智能中 继器中的参数,读取的参数内容包括:中继器 ID,设定的传感器位置,传感器 ID 码,还有 标准压力。 1.
TPMS1209T03-CS Hand Tool User Manual 3.阅读成功后,可进入“中继器 ID 码设置”菜单和“拖车传感器位置设置”菜单查看阅读 到的信息。 3. After read successfully, enter the “CHOOSE BOOSTER ID” and “ADD SENSOR TO TRAILER” menu to check the read information.
TPMS1209T03-CS Hand Tool User Manual 3.此时按“Enter 键”“BOOSTER ID”的第一个数字“0”开始闪烁,按数字键输入需要的 “BOOSTER ID”号,当输入一位数字后闪烁的数字位置自动跳到下一位。按 或 键可 移动要更改的数字位置。 3. Press “ENTER” button, the first digit of“BOOSTER ID”flashes, press number key to input the required “BOOSTER ID”, the second digit flashes after finished the first digit programming. Press or can skip to the required number position. BOOSTER ID : 〉011 012 003 TRAILER ID : 000 000 3.
TPMS1209T03-CS Hand Tool User Manual 1. Under the main menu interface, press SELECT”option. to remove the “>”to the “PRESSURE UNIT READ INFORMATION TO BOOSTER CHOOSE BOOSTER ID 〉PRESSURE UNIT SELECT ADD SENSOR TO TRAILER 2.按下“Enter 键”进入手持设备压力单位设置界面。屏幕显示如下: 2. Press “ENTER” button to enter the “PRESSURE UNIT SELECT”interface. The screen display as below: Pressure UnIt Select Current Pressure Unit :PSI 3.此时按“Enter 键”后,压力单位“PSI ”开始闪烁,按方向键 选择压力单位, 当需要的压力单位出现时按“Enter 键”确认保存。然后按“菜单键”返回到功能菜单界 面。 3.
TPMS1209T03-CS Hand Tool User Manual 拖车传感器位置设置 ADD SENSOR TO TRAILER 用户可根据需要来设定传感器位置与轮胎标准压力。 User can program transmitter position and standard pressure according to the demand. 1. 在功能菜单显示界面下,按方向键 将“>”移动到 ADD SENSOR TO BOOSTER 选项, 按下“Enter 键”进入 ADD SENSOR TO BOOSTER 界面。如图所示: 1. Under the main menu interface, press to remove the“>”to the “ADD SENSOR TO BOOSTER” option. Press “ENTER” button to enter the interface.
TPMS1209T03-CS Hand Tool User Manual 发送信息给中继器 1.当设定好 BOOSTER ID 和传感器 ID 码后,按 或 键选择到“SEND INFORMATION TO BOOSTER”,然后将手持工具靠近智能中继器,按“Enter 键”进入发送。此时显示 “SENINING . . .” ,表示正在向智能中继器发送信息。 1. When finished programming the BOOSTER ID and transmitter ID, press or to select “SEND INFORMATION TO BOOSTER, then put the Hand Tool close to the Smart Booster, press “ENTER” button to send the information. The screen display“SENINING . . .”, it means sending information to Smart Booster.