Tigerkin User Guide Project:Tigerkin Bluetooth 5 BLE module Model name:Tigerkin Designed:Suzhou Pairlink Network Technology Ltd. Version Note Date V1.0 Create 2019/03/28 This document contains information that is proprietary to Pairlink . This document is commercially confidential and must NOT be disclosed to third parties without prior consent. The information provided herein is believed to be reliable. But production testing may not include testing of all parameters.
Contents 1.Functional Characteristics..........................................................................................................- 3 1.1.Product Feature.............................................................................................................. - 4 1.2. Main Application Domain.............................................................................................. - 4 2.Electrical Specifications.............................................................................
1.Functional Characteristics Tigerkin is SOC module developed based on the Bluetooth 5 standards. the internal integration architecture ARM® Cortex®-M4 processor.It has the advantage of small volume, low power consumption, long distance transmission, strong anti-jamming capability, low cost.Specifically applied to Bluetooth low power control area,and suitable for various occasions short distance wireless communication. Tigerkin integral compact, simplifies the design in hardware and institution for user.
1.1.Product Feature 1: Tigerkin under Bluetooth 5 specification. 2: Supports Cypress proprietary data rate up to 2 Mbps 2: Support SIG Mesh/Pairlink Connected Mesh 3: Easy to extend SPI Flash.The default value is 8Mbit.Memory size is optional. 4: Integrated IPEX connector and Ceramic antenna 5: Support OTA function. 1.2. Main Application Domain 1: Home automation/ Intelligent lighting / Intelligent access control system. 2: Industrial telemetry / Industrial data collection.
2.Electrical Specifications Recommended Operating Conditions Parameter Specification Typical Min. Power Supply 2.7 Unit Max. 3.3 3.6 V Digital I/O Characteristic Characteristics Symbol Min. Specification Typical Unit Max. Input Low Voltage VIL - - 0.8 V Input High Voltage VIH 2.0 - - V Min. Target output power Max. Unit RF Specifications Parameter Conditions Receiver RF Specifications Frequency range - 2402 - 2480 MHz RX sensitivityb - - -91.
3.Physical Parameters Parameter Performance Note Distance 50M Environment: Sunny and open Antenna: Ceramic antenna, Airspeed: 1Mbps Crystal 24MHz Industry Standard Protocol BLE5 Supported data rates: 1 Mbps, 2 Mbps Package Patch Refer to section 4.4 IC CYW20735B1 60PIN-QFN RAM 320KB ROM 2MB FLASH 8Mb Core ARM Cortex-M4 Dimensions 14.0mm*23.0mm*2.
4.Hardware design and PCB layout 4.1.Pin assignment and Pin descriptionab Tigerkin Pin definition can refer to Figure 2. Table 1:Module Pin Description Pin Pin Name I/O Number POR Alternate Function Description State 10 VBAT ADI / Power Supply 1,2,20 GND GND / Connect to Ground 9 RESET DI INPUT. Reset signal (active Low). Floating if not used 3 UART_RTS I,PU RTS for HCI UART interface. NC if unused. 4 UART_CTS I,PU CTS for HCI UART interface: NC if unused.
4.2.Reference Design The latest schematic and design examples, bill of material, and layout file are available from original developer . Contact us for details. Circuit Description 1:VBAT supply voltage value is 2.70V-3.60V. 2:PIN7(SPI_MOSI) reserved for testing. 3:PIN9(RST_L) is Module Reset_Control (active Low) ,Keep floating if the user is not using 4:Reserve JP1 burning interface if the PCB board has enough space. 5:Tigerkin support GPIOs supermux, All GPIOs can be defined as SPI /UART/I2C/PWM.
4.2.Reference Design The latest schematic and design examples, bill of material, and layout file are available from original developer . Contact us for details. Figure 2: Module Reference Design Circuit Description 1:VBAT supply voltage value is 2.70V‐3.60V. 2:PIN7(SPI_MOSI) reserved for testing. 3:PIN9(RST_L) is Module Reset_Control (active Low) ,Keep floating if the user is not using 4:Reserve JP1 burning interface if the PCB board has enough space.
5.Regulatory Module Integration Instructions List of applicable FCC rules This device complies with part 15.247 of the FCC Rules. Summarize the specific operational use conditions This module can be used in household electrical appliances as well as lighting equipments. The input voltage to the module should be nominally 2.7~3.6VDC, Typical value 3.3VDC and the ambient temperature of the module should not exceed 85℃. The module using two type antennas.
Label and compliance information The outside of final products that contains this module device must display a label referring to the enclosed module. This exterior label can use wording such as: “Contains Transmitter Module FCC ID: 2AQV6TIGERKIN”or “Contains FCC ID: 2AQV6TIGERKIN”, Any similar wording that expresses the same meaning may be used.
Additional testing, Part 15 subpart B disclaimer The final host / module combination need to be evaluated against the FCC Part 15B criteria for unintentional radiators in order to be properly authorized for operation as a Part 15 digital device.
