Installation Instruction

Suzhou Jernano Carbon Co., Ltd.
Tel: [phone]
Add: NO.398 Ruoshui Road, Suzhou Industrial Park, China;
Instructions for the use of Turbo Heat apparel heating system
1. Product model
product name specification
control
mode
voltage current size
Turbo heat 2.0
ACLAN-T3108
B20
temperatu
re control
5V/9V/
20V
0-2A
25*23cm,
19*17cm，
19*17cm
2. Installation instruction of apparel heating system
Structure and size of carbon nanotube apparel heating system is shown in
Fig.1. Please pay attention to the sensor of temperature red marked in Fig.1.
The sensor is not pressed and bent hardly.
Figure. 1 structure diagram of the apparel heating system
3. Instruction of controllers
The heating plate is temperature controlled, divided into 4 levels, the
temperature is respectively 38℃,42℃,46℃,50℃，The use of controllers is followed
by following steps:
1) The four levels are shown by white, green,purple and red light.
2) Turn on the controller when a 5V/9V/20V battery is connected to it. LED shows
red light in the controller, which is fourth level, The temperature is 50℃.